Hello George,
Thanks for the reply. Maybe I can go for FOD-track. I even have the pcb that was given to me years ago and it's more fun if I build it myself. But can I just connect it and let it communicate with HamRadio Deluxe or do I need to run another program?
73, ON4HF.
Eric Knaps Waterstraat 30 B-3980 Tessenderlo Belgium
Tel. +32472985876 (mobile)
George Henry schreef:
If you have a parallel port, the FOD-Track system uses that, instead of a COM port....
George, KA3HSW
----- Original Message ----- From: "Eric Knaps, ON4HF" [email protected] To: "amsat-bb" [email protected] Sent: Sunday, October 25, 2009 3:01 PM Subject: [amsat-bb] Which rotor control to use?
Hello guys,
I was wondering what kind of hardware to use to control my satellite rotors. I have the G-500A elevation rotor and the G-650C azimuth rotor. My only com port is connected with my FT-847 for doppler correction via HamRadioDeluxe so it must be something via the USB port. Thanks!
Eric - ON4HF
-- Eric Knaps Waterstraat 30 B-3980 Tessenderlo Belgium
Tel. +32472985876 (mobile)
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb