[amsat-bb] Receiving TigriSat Satellite

Hello all,

I am trying to receive TigriSat, First Iraqi satellite which have a FSK Beacon on 435MHz frequency. I use a 2 unit array of cross Yagi antenna and Kenwood TS2000 TRX.

The packet sounds quite good on TS2k whereas nothing is decoded on OnlineKISS+ ver 8.2.2 by DK3WN. The COMM port is connected to the serial port of TRX. The internal TNC of TS2000 was set to KISS mode. On air baud rate 9k6 and COMM port baud rate to 9k6 as expected. The COMM port also goes green on the software screen.

Have I miss any setting or is anything else required to decode the signals?