Hi Peter -- Sorry for the poor sentence construction -- It is my belief you have to use the rear connector for 9600 -- you cannot use the earphone / speaker connector ... I was trying to ask if you were ... Clarity is important ..
73, Bruce WA3SWJ
At 01:22 PM 7/29/2009, Peter Gibson wrote:
Hi Bruce Thanks for the reply yes tried all the sub menue,,,but have not tried to feed the audio From the earphone will give it a go Thanks again Pete G7LJA
-----Original Message----- From: Bruce Semple [mailto:[email protected]] Sent: 29 July 2009 15:57 To: Peter Gibson Subject: Re: [amsat-bb] TS2000
Hi Peter -- Have you switched the Extended Menu option -- I think it is number 45? 47? -- something like External TNC speed 1200/9600 (I am away from my radio right now) My observation is that this switch causes the audio from the detector -- to bypass the internal audio processing an be fed directly to the audio out on the rear connector. Are you using the rear connector - vs tying into the earphone jack?
It has the same effect on the input signal -- bypassing the internal audio processing -- and this is why I typically have to provide more "audio drive" when running 9600 baud.
Feel free to contact me of the list --
73, Bruce WA3SWJ
At 05:26 AM 7/28/2009, you wrote:
Hi
Need info on a TS2000 problem...radio not decoding 9k6 on either the
Internal tnc or an external tnc. Works fine on 1200
Phoned Kenwood all they want is for the radio to be sent back
73 peter G7LJA
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb