Check option "Satellite Mode", leave other options unchecked.
73s, Erich, DK1TB
Am 29.04.2017 um 04:25 schrieb Jim White:
I'm trying to set up an IC910 with SatPC32 to work with a VHF up / UHF down satellite.
I've built a doppler.sqf entry with 435xxx as the downlink and 145xxx as the uplink. The 910 will only transmit on the main band so that needs to be the VHF uplink. But SatPC32 puts the RX freq there, and the TX freq in the sub band.
Also, what should be checked in the options in the radio setup window. I have none checked at this time.
Is there a setting to change the main/sub tx/rx or can I just swap the up and down freqs in the doppler.sqf entry?
Jim
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb