I saw this on an old AMSAT-BB email chain: https://amsat.org/pipermail/amsat-bb/2015-May/053249.html It says it has to be done through the data jack not the USB port.
Adrian AA5UK
On Thursday, November 21, 2019, 9:55:50 AM CST, Mark L. Hammond via AMSAT-BB [email protected] wrote:
I have never been able to get the USB route to work in the 9100. I suspect low frequencies are being cut off/filtered.
Mark N8MH
On Thu, Nov 21, 2019 at 9:36 AM jeff griffin via AMSAT-BB < [email protected]> wrote:
Is anyone using the Icom 9100 to RX 9600 baud Fox Telemetry thru the USB port? I'm using the 9100 this way to collect Falconsat-3 telemetry, but not able to do so with the Fox telemetry. I also can RX 9600 baud APRS packets. I'm using the Data mode DFM, and 9600 baud menu item 57 is set to ON. I've also tried to different sound level setting in the win10 sound control panel, but no joy..
73 Jeff kb2m
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb