Re: [amsat-bb] SatNOGS ground station

Quoting [email protected] who wrote on Thu 2014-11-13 at 15:42:

Here is an interesting open-source ground station project that uses the RTL-SDR SDR receiver, an embedded linux board, Arduino, and 3D printed parts.

http://satnogs.org

I have been following this project for a while and the documentation is improving a lot.

It looks like it should be able to handle an arrow antenna and it can be controlled with the Easycomm protocol and rotctld which for as far as I know means most Linux and Windows applications for amateur satellite operation can deal with it.

Koos van den Hout PD4KH