Hi Carl, I have not used AGWPE before as a TNC. How does it output it's data? A virtual serial port?
--Jamie, KF6RFX
On Fri, Oct 28, 2011 at 10:59 AM, Carl Rimmer W8KRF [email protected] wrote:
I have installed the RAX-2 decoding software hoping to be able to copy and decode the telemetry. I am using a TS-2000 with a SignaLink USB and AGWPE as the TNC. I am not able to get the software to recognize this set up. I have AGWPE setup in Kiss Simple mode at 9600 Baud. (I use the SignaLink with the ARISSATTLM software and it works fine.) Can anyone tell me if this setup will work with the RAX-2 software? If so, what am I not doing or doing wrong?
Thanks and 73,
*Carl W8KRF* ______________________________**_________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/**listinfo/amsat-bbhttp://amsat.org/mailman/listinfo/amsat-bb