You should have no problem;
if your USB (Silabs) driver was installed previously and the radio was working via USB;
if you have the correct settings for USB (Com port), baud rate and CI-V address.
Nothing changes with a SatPC32 if you saved the previous installation files and use them as part of the SatPC32 "upgrade" installation:
http://www.dk1tb.de/updateinstructions.htm
hope this helps,
Stefan
On Wed, Feb 24, 2016 at 7:16 PM, Tom Lubbers K8TL [email protected] wrote:
While reinsatlling and upgrading PCSAT 32 I ran across a page that gave some detailed instructions and cautions for using the USB port on the 9100 with PCSAT32. I made a mental note to make a copy of it, my mental note book is defective anyone know what article I'm talking about and where it is? Tom Lubbers K8TL _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb