Try setting menu option 50F to 9600.
73,
Paul, N8HM On Tue, Sep 11, 2018 at 5:21 PM Lisa R. Nelson [email protected] wrote:
Love my new radio, BUT it seems the audio output on the ACC2 connector pin 3 (MANO) has some filtering on it. It's also only present when the squelch is open. On my V71A, there's a signal called "PR9 Output 9600 (bps) repeat signal" which is always present regardless of squelch etc., and works very well for tapping the audio for DUV detection.
I did discover that I could get a EYE diagram (kinda) after turning the 'Lo/Width' knob all the way down. So I believe that means that the radio is filtering the MANO output which it shouldn't....
Has anyone modified the TS-2000 to tap into the audio before it is filtered? I hear this was a practice for a long time. Just assumed Kenwood would have provided a better output for work like this.
Then again I easily could be overlooking something simple... if so, please tell me! Attached is the EYE diagram.
Thanks,
Lisa AK7WS
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb