Thanks for the info.
Gopal
On Sat, 17 Nov 2018, 23:37 Gregory Beat <w9gb@icloud.com wrote:
The new P4-A (Es’hail 2) satellite will be located a 26° East longitude (west of Istanbul, Turkey). You should “bookmark” the AMSAT-DL web page on P4-A. https://amsat-dl.org/eshail-2-amsat-phase-4-a This web page has the basic information on the P4-A / Es’hail 2 satellite.
The satellite is NOT yet “in GEO position” for operation (typically several weeks) AMSAT-DL will announce, when open in 2019.
https://amsat-dl.org/p4a-positionining-and-iot?utm_source=dlvr.it&utm_me... — The P4-A Satellite only has “S-band” UPLINK with RHCP and “Ku-band” DOWNLINK (Vertical for narrow; Horizontal for Wide) transponders. Their are Two (2) Linear Transponders : Narrow (250 kHz) and Wide Band (8 MHz) — I would suggest that you FIRST focus on your DOWNLINK (Receiver) setup. While Commercial solutions will require $$$, numerous Ku-band satellite TV components exist in the global market — as starting points for DIY builder. DIY solutions will require previous “Maker” / “Builder” fabrication skills & technical knowledge. IF you are an appliance radio operator, this is not a good “first DIY build”. — Roland, DF3LZ has been documenting his DIY Receiver Build (follow on Twitter @DF3LZ ) , using the Octagon Optima OTLSO LNB and the DF9NP PLL with 10 MHz GPS.
http://lnbreviews.blogspot.com/2017/04/octagon-optima-otlso-pll-slim-twin.ht...
Dieter Leupold, DF9NP http://www.df9np.de/page2.html Price List http://www.df9np.de/Contents/Price%20List%20PLLs.pdf ==== From: "Gopal Madhavan" Subject: [amsat-bb] Up and down converters
Any information available for up and down converters that use VHF and UHF radios to work the new Geo-Stationary satellite? (P4-A, Es’hail 2)
Gopal Madhavan VU2GMN / M0GDB