What is the expected packet format? Can you provide an example?
Fldigi isn't particularly good at tracking doppler shift, however there are other decoding options out there...
73 Mark VK5QI
On Fri, Mar 19, 2021 at 11:31 PM Gustavo Carpignano via AMSAT-BB < [email protected]> wrote:
Dear All
After being launched on 03/20/2021 at 03: 06 UTC from Baikonour with the Soyuz-2 rocket aboard UNISAT-7. On 03/21/2021 between 11:55 and 11:58 UTC, three radio amateurs pocketqubes will be deployed from the mothership UNISAT-7 amateurs, DIY-1, SMOG-1 and STECCO.
DIY-1 / ARDUIQUBE (ARGENTINA):
Frequency: 437.125 MHz USB/CW Power: 25/50/100 mW. Telemetry: RTTY 100BD 7N2, 15 ppm CW. ROBOT CW autotransponder, (like RS-5 / RS-7 / RS10-11 soviet satellites) Antenna: dipole
At the time of deployment DIY will be in low power until verifying the status of the battery and will be sending only telemetry in an RTTY sentence. It is recommended to receive it with the FLDIGI-HAB program. Once the operation and battery charge are verified, the ROBOT will be activated and we hope it will be the delight of the CW enthusiasts. Much more info once in orbit. I appreciate the reception reports.
73 Gustavo LW2DTZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org