The G6LVB unit also works great with Orbitron and the Wisp driver. RoD KD0XX
--- On Mon, 3/2/09, Mark L. Hammond marklhammond@gmail.com wrote:
From: Mark L. Hammond marklhammond@gmail.com Subject: [amsat-bb] Re: LVB Tracker and HRD Sat Tracker setup Problem To: amsat-bb@amsat.org, "racer5039" racer5039@q.com Date: Monday, March 2, 2009, 9:22 PM
Hi Marv,
I don't think that HRD supports a control box in either EasyComm or GS232 modes yet, so the LVB Tracker isn't going to work. It is still in the "developmental" stage as I recall. So, you probably cannot get it to work right with that program...
So--you might want to check out SatPC32. It's a super program, and if/when you register, ALL of the money goes to AMSAT!
73,
Mark N8MH
- Subject: [amsat-bb] LVB Tracker and HRD Sat Tracker setup Problem
- From: "racer5039"
<mailto:racer5039@DOMAIN.HIDDENracer5039@xxxxx>
- Date: Mon, 2 Mar 2009 18:22:47 -0600
I got my LVB Tracker box today and while going through the setup I have
found a
couple of things. To start off. I am using HRD 4.1 B2055, Sat Tracker 4.1 B 2019. Radio is a Kenwood 2000 Rotor is the G-5500 In the rotator set up of HRD there is no option for the GS 232B so I have
no
control of the ELEV. I have looked thought the other posts on HRD site but cant seem to find any
talk of a fix for this. I have check the com to the rotor and can move them by hand just fine with
both
the GS 232 & EasyComm. Can someone point me to the right area to fix this problem please. Thanks Marv N0FJP
Mark L. Hammond [N8MH] _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb