Yes decoding and there is a gap in the decoding when this happens, I see dac overflows increasing but do not see resets in the telem but I could be missing something. it's long enough that it is clearly visible on a sdr display, like I said its about a sec or two in length.
WA7EE sent me a mov that captured what the sat is doing, here is a dropbox link for viewing Thanks to Mariana for capturing it.
On 2/8/2020 15:48, Burns Fisher wrote:
Thanks for reporting this, Kevin. I have not noticed it. Are you able to decode signals from HuskySat with FoxTelem? If so, I wonder where this happens. Do you miss a frame (if you are getting every frame, they should be about every 5 seconds). Are you mainly noticing it by audio (in which case it might be a bunch of zeros in a row). There is one point where I send 1/0/1/0/1/0 which would explain this, but that should only happen when it shifts modes, and I don;t think that has happened.
Any more info would be useful and interesting.
Burns WB1FJ Fox/Husky Software
Noticed today that huskysat stops sending data and sends only a carrier for about a second then starts back up, saw it do that 4 times last pass. DAC overflows? 73 Kevin wa7fwf _______________________________________________ Sent via [email protected] <mailto:[email protected]>. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb