This is the arrangement that I use. As another commenter said, if you’re not interested in phasing them for circular polarity, all you need is a coax switch. There are surplus switches available that have low insertion loss beyond 70 cm. Mine runs on 28v and has N connectors. For satellite work, I have a toggle switch in the shack that allows me to flip the relay and change polarity at will during a satellite pass. The reason the antennas are not phased together is that I use them separately for terrestrial work. The horizontal is for weak signal work while the vertical is for FM repeater and packet communications. Both are on a G5500 rotator (in the attic thanks to the local HOA.) I’ve been pleased with their performance and flexibility. 73,RayKN2K
Sent from the all new AOL app for iOS
On Sunday, November 28, 2021, 11:23 PM, Brian Clark decompudoc@gmail.com wrote:
Hello Everyone, I have two Dual-Band 2 Meter/440 Yagi's that I would like to use on a Rotator, with one in the vertical polarity and one in horizontal. Is there a phasing circuit or system that someone can recomend to allow both of these antennas to coexist on one coax input to my radio? Thanks, BrianKF6FES -----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org