[amsat-bb] SSB-Electronics preamps

Joe, lots of good ideas provided for clamping your SSB Electronic pre amp to your satellite setup. I've got the same pre amp and mounted it on the mast pipe with hardware provided. The clamp is is not a U shaped one, the U is squared off and goes between the two holes, out and away from the body of the amp.

Then two straight clamping jaws, facing each other, are placed on the studs sticking out from the pre amp with two lock washers and nuts to secure it in place. Sure is a different design. If it would help, let me know and I can send you photo's of mine.

Regards,

Gary/N8AYY

Sent with [ProtonMail](https://protonmail.com) Secure Email.