blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Suggest you read the section of the 9100 manual concerning the Data mode. The 9100 puts out notoriously high audio levels from the USB port when Data mode is on.
Sent from Yahoo Mail for iPad
On Tuesday, November 22, 2016, 09:21, Richard Lawn [email protected] wrote:
. I am able to connect to my computer and manage CAT functions and various digital software programs without problems. But I was unable to get sufficient audio stream via 9100 USB to my computer. After several online conversations I bought a rigblaster advantage to handle such things and am still having problems with setup. I now get good audio from the radio to the computer and software, and PTT is handled just fine but I have no audio RF out from the radio either from fldigi or wsjt. I have no idea what's wrong. I think it may have to do with driver conflict as I initially tried a Signalink so it installed drivers and of course the rigblaster did the same, installing new sound drivers. It's interesting that if I choose the USB codec in the software setup for sound in and out, which I believe is actually what was installed by the signalink, the software radio connection works but if I use the sound in and out labeled rigblaster advantage it doesn't. I should add that none of the level controls on the RBA work either even when I choose the USB audio codec as sound sources. Clearly I'm doing something wrong but I can't sort it out. I never had so much trouble getting digital mode software to work on a radio. Frustrated, Rick, W2JAZ