Thanks, Jorge!
I checked out your blog about the homebrew AZ-EL rotator. That’s a really nice project!
73,
--Alex KR1ST
From: Jorge via AMSAT-BB [email protected] Sent: Sunday, February 5, 2023 3:58 PM To: [email protected] Subject: [AMSAT-BB] Re: LVBTracker firmware modified to allow for more azimuth calibration points.
Great job Alex! It looks like a good update for my old tracker.
73, Jorge LU1DA
El 4/2/2023 a las 2:43 a. m., Alex Krist via AMSAT-BB escribió:
Hi there,
A while ago, perhaps almost two years ago, I modified the LVBTracker firmware in my Fox Delta ST2-USB so that it would allow for more calibration points than just the min and max for azimuth. I had added a remote-control option to an old Yaesu G-450XL, but the output voltage was very non-linear, which led to terrible aiming of the antennas. With the mods I made to the firmware it now allows me to calibrate the controller at 0, 90, 180, 270, and 360 degrees and aiming is now rather accurate. I wrote about it here:
https://thehamlab.com/2023/02/02/fox-delta-st2-lvbtracker-calibration-mods/
If you feel this could be useful for you, the source code for the project can be found on GitHub:
https://github.com/TheHamLab/LVBTracker.KR1ST
73,
--Alex KR1ST
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org