Full microprocessor reset via the previous mentioned procedure did not fix the problem.
On Wed, Mar 1, 2017 at 7:26 AM, Paul Stoetzer [email protected] wrote:
Did you do a full microprocessor reset by pressing [A=B]+[Power]?
73,
Paul, N8HM
On Wed, Mar 1, 2017 at 8:20 AM, Mike Thompson [email protected] wrote:
Thank you for the help. I shot another short video showing some more symptoms of my problem
Thank's for the help. Mike, AE0MT
On Tue, Feb 28, 2017 at 11:06 PM, Jerry Buxton [email protected] wrote:
AO-85 and Fox-1B/Cliff/D will start the transmitter "hang timer" when they detect the CTCSS. The tone must be again detected within 60 seconds in order to reset the hang timer else the downlink transmission will stop. By having your tone on your uplink signal all the time, each time someone keys it resets the hang timer.
Jerry Buxton, NØJY
On 2/28/2017 18:45, Andrew Glasbrenner wrote:
Actually the PL tone on AO-85 just turns the repeater on. Once it's
on,
there's no tone required until it times out...that's why you hear the
noise
on the uplink.
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb