Hi all,
On the one good pass over ZL so far I had to use a +6kHz offset on my uplink to receive on the nominal downlink frequency. i.e. satellite input frequency of 535.556 (nominal 435.550) to hit the 145.900 satellite output frequency.
Alan ZL2BX
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of OZ1MY Sent: Sunday, 27 July 2008 09:57 To: AMSAT-BB Subject: [amsat-bb] Delfi C3 transponder frequencies ?
Hi all, The transponder was working at the pass with AOS at 0926 UTC here in Copenhagen. Had a couple of QSOs with HA2RD and PE1ITR.
As far as I can make out the frequencies are different from the published ones.
Just after the transponder was turned on I har to go to an uplink of 435.565 MHz to get 145.900 MHz down. This is the nominal pair I used in SatPC32.
After some time had to adjust the uplink down to 435.563 MHz.
Can someone confirm this ? 73 OZ1MY Ib
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb