I'm curious, does the ft-817 behave the same way??
On Thu, Nov 1, 2018 at 10:15 AM -0400, "Mark L. Hammond" [email protected] wrote:
Hasan, is this a possible solution?
https://www.arrl.org/shop/files/pdfs/Satellite%2520Kit.pdf
Mark N8MH
On Thu, Nov 1, 2018 at 9:09 AM John wrote:
Hasan,
It's a "design feature". As you said, you've been told correctly. It doesn't accept CAT commands for changing frequency whilst in TX.
73, John (M5ET)
-----Original Message----- From: AMSAT-BB On Behalf Of Hasan al-Basri Sent: 01 November 2018 13:54 To: [email protected] Subject: [amsat-bb] Yaesu FT-857D and Doppler
I have been told that this radio will not accept CAT doppler adjustments while it is transmitting. I definitely see that it doesn't, but don't know if I might be doing something wrong.
Here is how it behaves:
If not transmitting, doppler correction works perfectly. As I assert PTT, doppler adjustment stops and I slide up the band...pretty quickly on high passes. If I hold the ptt for more than a couple of seconds, I will go right out of the passband of my 2.2 kHz filter...and of course become unintelligible.
As soon as I drop PTT, and key the mike again, I'm dead on freq...and as long as I hold the PTT on, I drift up the band. *It appears the the FT-857D will not accept CAT commands while PTT is asserted.*
At this point I need to know that there is no real solution to this problem with this radio. If that's true, I can get pretty good at doing this:
Assert PTT and start talking.
Grab VFO knob, adjust as I talk to keep sounding good.
Drop PTT and begin to listen to other station. (at the drop of PTT, tx
freq snaps to "proper" place that it couldn't get to when PTT was asserted)
- My turn to talk: Assert PTT and I'm dead on freq where I belong.
Basically, I'm doing manual uplink adjustment to freq while I'm talking and letting the CAT adjustment for doppler to take place (to the uplink freq) while I'm listening.
*If there is a better way to do this, please advise*.
Note, it is not practical to drop PTT quickly enough and often enough to prevent the problem...I can only speak a couple syllables at best, before I slide away.
Equipment and Setup:
Rx: SDRPlay RSP2 Sofware Defined Radio with SDR Console v 3.03 providing Doppler to Rx
Tx: Yaesu FT-857D controlled as External Radio by SDR Console v 3.03 providing doppler correction to the External Radio.
p.s. I have tried other doppler control programs and they behave the same way.
Any and all help would be most appreciated, even simply: You are stuck with the way you are currently doing it.
73, N0AN
Hasan _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb