Hi Marv,

I don't think that HRD supports a control box in either EasyComm or GS232 modes yet, so the LVB Tracker isn't going to work. It is still in the "developmental" stage as I recall. So, you probably cannot get it to work right with that program...

So--you might want to check out SatPC32. It's a super program, and if/when you register, ALL of the money goes to AMSAT!

73,

Mark N8MH

• Subject: [amsat-bb] LVB Tracker and HRD Sat Tracker setup Problem
• From: "racer5039" <mailto:racer5039@DOMAIN.HIDDENracer5039@xxxxx>
• Date: Mon, 2 Mar 2009 18:22:47 -0600

---

I got my LVB Tracker box today and while going through the setup I have found a couple of things. To start off. I am using HRD 4.1 B2055, Sat Tracker 4.1 B 2019. Radio is a Kenwood 2000 Rotor is the G-5500 In the rotator set up of HRD there is no option for the GS 232B so I have no control of the ELEV. I have looked thought the other posts on HRD site but cant seem to find any talk of a fix for this. I have check the com to the rotor and can move them by hand just fine with both the GS 232 & EasyComm. Can someone point me to the right area to fix this problem please. Thanks Marv N0FJP

Mark L. Hammond [N8MH]