Hi All, Well finally everything is working great using the Data2 socket, once I got all the connections PTT, audio in/out into the Data2 socket. I am using hs_soundmodem and PacSat Ground Station. The tricky part for me was getting the audio IN level correct, David,4X1DG suggested using an O-Scope to set this level. I found that .25V p-p was the sweet spot, and after that it has been working great. Thanks to all for the great suggestions, special thanks to David,4X1DG and Mark,N8MH.
73,
Carm,WO3T
PS: I forgot to mention I am using an RigBlaster NOMIC to key the 9100, it is what I had on hand.
Hurray Carm!! Nice work. Send me a message on FS3 :-)
By the way. Falconsat-3 has an uptime over three years so far! Awesome work by Jim White WD0E.
73, Mark N8MH
On Thu, Mar 25, 2021 at 2:30 PM Carmen Peca [email protected] wrote:
Hi All, Well finally everything is working great using the Data2 socket, once I got all the connections PTT, audio in/out into the Data2 socket. I am using hs_soundmodem and PacSat Ground Station. The tricky part for me was getting the audio IN level correct, David,4X1DG suggested using an O-Scope to set this level. I found that .25V p-p was the sweet spot, and after that it has been working great. Thanks to all for the great suggestions, special thanks to David,4X1DG and Mark,N8MH.
73,
Carm,WO3T
PS: I forgot to mention I am using an RigBlaster NOMIC to key the 9100, it is what I had on hand.
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (2)
-
Carmen Peca -
Mark L. Hammond