SatPC32 and the Green Herron Rotor Controller
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP
Peter,
You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports??Peter On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH [email protected] wrote:
Peter, You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9 On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller
RT-21 Green Heron
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 1:22 PM Peter [email protected] wrote:
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports?? Peter
On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH < [email protected]> wrote:
Peter,
You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Hit send too soon. After you select the rotors then you need to go to Communication > AZ Com port and select the com port for AZ then do EL/AZ+EL Com port and select the com port for the EL
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 1:34 PM Dave Webb KB1PVH [email protected] wrote:
Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller
RT-21 Green Heron
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 1:22 PM Peter [email protected] wrote:
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports?? Peter
On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH < [email protected]> wrote:
Peter,
You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Got it. Thanks for that.So, how do you load in the satellites you want it to track and provide next pass time/date?I see I managed somehow to get one satellite into that window but I don't know how I did it?Is their a decent manual someplace?Peter
On Thursday, May 7, 2020, 01:34:43 PM EDT, Dave Webb KB1PVH [email protected] wrote:
Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller > RT-21 Green Heron
Dave-KB1PVH
Sent from my Galaxy S9 On Thu, May 7, 2020, 1:22 PM Peter [email protected] wrote:
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports??Peter On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH [email protected] wrote:
Peter, You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9 On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Access the manual in SatPC32. click on "?" in the menu bar and open the manual.....
On Thu, May 7, 2020 at 12:42 PM Peter via AMSAT-BB [email protected] wrote:
Got it. Thanks for that.So, how do you load in the satellites you want it to track and provide next pass time/date?I see I managed somehow to get one satellite into that window but I don't know how I did it?Is their a decent manual someplace?Peter
On Thursday, May 7, 2020, 01:34:43 PM EDT, Dave Webb KB1PVH <[email protected]> wrote:
Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller > RT-21 Green Heron
Dave-KB1PVH
Sent from my Galaxy S9 On Thu, May 7, 2020, 1:22 PM Peter [email protected] wrote:
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports??Peter On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH < [email protected]> wrote:
Peter, You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9 On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Dave Webb KB1PVH -
Peter -
Stefan Wagener