Hit send too soon. After you select the rotors then you need to go to Communication > AZ Com port and select the com port for AZ then do EL/AZ+EL Com port and select the com port for the EL
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 1:34 PM Dave Webb KB1PVH [email protected] wrote:
Setup > AZ Controller > RT-21 Green Heron then Setup > EL/AZ+EL Controller
RT-21 Green Heron
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 1:22 PM Peter [email protected] wrote:
I'm not seeing the Green Herron dual alt az RT21 as a choice or even how to set its serial lports?? Peter
On Thursday, May 7, 2020, 12:57:50 PM EDT, Dave Webb KB1PVH < [email protected]> wrote:
Peter,
You can set DDE output in SatPC32 and also use a DDE client like the one from Green Heron called GH Tracker or what I do is run PSTrotator which supports the Green Heron for rotor control and run SatPC32 for radio control. Just be aware if you use DDE output you will lose the ability to park antennas after a pass and also the ability to have antennas start before a pass.
Dave-KB1PVH
Sent from my Galaxy S9
On Thu, May 7, 2020, 12:52 PM Peter via AMSAT-BB [email protected] wrote:
So, I do not see as a choice the Green Herron RT21 Alt Az rotorcontroller????? How can I get the program to control the antennas???ThanksPeterW2PP
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb