Problem programming SatPC32 Doppler.SQF for ISAT (DStar One) IC-9100 not showing Freq/Mode correctly
Problem.. ISAT (Dstar One) in SatPC32's Doppler file wrong? My IC-9100 is not responding correctly to the following "ISAT,435525,437325,DV,DV,0,0,Voice,U/U" Radio shows "Off" on the 435.520Mhz UHF top freq, but shows TX 145.950Mhz DV on the lower instead of 70cm DV. Steve NS3L
Are you using SatPC32ISS? The normal SatPC32 program can’t do in-band split.
73,
Paul, N8HM
On Fri, Feb 8, 2019 at 07:39 Steve Nordahl via AMSAT-BB [email protected] wrote:
Problem.. ISAT (Dstar One) in SatPC32's Doppler file wrong? My IC-9100 is not responding correctly to the following "ISAT,435525,437325,DV,DV,0,0,Voice,U/U" Radio shows "Off" on the 435.520Mhz UHF top freq, but shows TX 145.950Mhz DV on the lower instead of 70cm DV. Steve NS3L _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Paul Stoetzer -
Steve Nordahl