Hello all,
I am trying to receive TigriSat, First Iraqi satellite which have a FSK Beacon on 435MHz frequency. I use a 2 unit array of cross Yagi antenna and Kenwood TS2000 TRX.
The packet sounds quite good on TS2k whereas nothing is decoded on OnlineKISS+ ver 8.2.2 by DK3WN. The COMM port is connected to the serial port of TRX. The internal TNC of TS2000 was set to KISS mode. On air baud rate 9k6 and COMM port baud rate to 9k6 as expected. The COMM port also goes green on the software screen.
Have I miss any setting or is anything else required to decode the signals?
Rupesh,
I suggest setup the TS 2000 TNC in AGWPE and OnlineKISS will connect to the port in AGWPE to enable decode. Other way is to use a software TNC http://uz7.ho.ua/packetradio.htm%C2%A0to which Online KISS will connect to decode the data. 73 Nitin [VU3TYG]
From: Rupesh Lad rupeshdlad2738.rl@gmail.com To: amsat-bb@amsat.org Sent: Friday, 18 July 2014 8:59 PM Subject: [amsat-bb] Receiving TigriSat Satellite
Hello all,
I am trying to receive TigriSat, First Iraqi satellite which have a FSK Beacon on 435MHz frequency. I use a 2 unit array of cross Yagi antenna and Kenwood TS2000 TRX.
The packet sounds quite good on TS2k whereas nothing is decoded on OnlineKISS+ ver 8.2.2 by DK3WN. The COMM port is connected to the serial port of TRX. The internal TNC of TS2000 was set to KISS mode. On air baud rate 9k6 and COMM port baud rate to 9k6 as expected. The COMM port also goes green on the software screen.
Have I miss any setting or is anything else required to decode the signals?
-- Regards, Rupesh Lad _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Nitin Muttin -
Rupesh Lad