To Ryan, Mark, Christy and others whose information proved very helpful. I solved the receive issue by simply changing the Menu 50 submenu to 9600 from 1200. Instant decodes. Tx is another issue. Listening to my signal on my D7 HT, I hear almost no digital “whoosh”, just carrier.
True to Ryan’s and Mark’s info re filtering in the Signalink attenuating the 9600 data stream, a call to a Signalink tech confirmed that the older Signalinks (with the red transformers like mine) probably do not pass enough 9600 data to be useful. However, the newer Signalinks reportedly do a better job and indeed ops are using them.
I prefer to not have to buy a new SL and will do some online searching for an alternative interface or other solution (but not a physical TNC).
I hope this provides a “little” help for anyone else with a TS2K having trouble getting on Falconsat.
73, Craig N6RSX
NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient of this communication, or an employee or agent responsible for delivering this communication to the intended recipient, please advise the sender by reply email and immediately delete the message and any attachments without copying or disclosing the contents. Thank you.