SatPc32ISS problems with GREENCUBE
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.
The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe
or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip
Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer.It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).
In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.
The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.
If everything works, I will upload new setup files.
73s, Erich, DK1TB
Erich, Thanks! I will try it this morning. Can you confirm for me: the Doppler.sqf line should show USB-D, LSB-D, REV? Ray KN2K
Sent from the all new AOL app for iOS
On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann erich.eichmann@t-online.de wrote:
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.
The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe
or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip
Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer. It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).
In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.
The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.
If everything works, I will upload new setup files.
73s, Erich, DK1TB
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Erich, I used the updated software for the GREENCUBE pass that started about 1420z today. Everything seemed to work well — 13 QSOs including four with Japanese stations. Thanks for your efforts! 73, Ray KN2K
Sent from the all new AOL app for iOS
On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann erich.eichmann@t-online.de wrote:
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.
The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe
or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip
Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer. It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).
In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.
The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.
If everything works, I will upload new setup files.
73s, Erich, DK1TB
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Erich,
Likewise, worked perfectly for me as well. I even got a ZL station! Thanks again for the SatPC32ISS-2 update.
Cal - N7AY
On 11/26/2022 11:21 AM, crohtun--- via AMSAT-BB wrote:
Erich,
I used the updated software for the GREENCUBE pass that started about 1420z today. Everything seemed to work well — 13 QSOs including four with Japanese stations. Thanks for your efforts!
73,
Ray KN2K
Sent from the all new AOL app for iOS https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661
On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann erich.eichmann@t-online.de wrote:
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D. The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe <http://www.dk1tb.de/SatPC32ISS_2.exe> or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip <http://www.dk1tb.de/SatPC32ISS_2.zip> Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer.It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode). In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value. The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D. If everything works, I will upload new setup files. 73s, Erich, DK1TB ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available athttps://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences athttps://mailman.amsat.org
Do I have to upgrade the whole SatPC32 package to version 12.10, or does this …ISS executable work with the latest 12.9 version?
From: Calvin McDonald 7ndel3fr@gmail.com Sent: Saturday, November 26, 2022 1:25 PM To: Erich Eichmann erich.eichmann@t-online.de; AMSAT-BB AMSAT-BB@amsat.org Subject: [AMSAT-BB] Re: SatPc32ISS problems with GREENCUBE
Erich,
Likewise, worked perfectly for me as well. I even got a ZL station! Thanks again for the SatPC32ISS-2 update.
Cal - N7AY
On 11/26/2022 11:21 AM, crohtun--- via AMSAT-BB wrote:
Erich,
I used the updated software for the GREENCUBE pass that started about 1420z today. Everything seemed to work well — 13 QSOs including four with Japanese stations. Thanks for your efforts!
73,
Ray KN2K
Sent from the all new AOL app for iOS https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661
On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann mailto:erich.eichmann@t-online.de erich.eichmann@t-online.de wrote:
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.
The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe http://www.dk1tb.de/SatPC32ISS_2.exe
or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip http://www.dk1tb.de/SatPC32ISS_2.zip
Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer. It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).
In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.
The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.
If everything works, I will upload new setup files.
73s, Erich, DK1TB
Tom,
Is working well alongside my version of SatPC32 12.9
Colin VK5HI.
From: tjschuessler--- via AMSAT-BB amsat-bb@amsat.org Sent: Sunday, 27 November 2022 11:19 To: 'AMSAT-BB' AMSAT-BB@amsat.org Subject: [AMSAT-BB] Re: SatPc32ISS problems with GREENCUBE
Do I have to upgrade the whole SatPC32 package to version 12.10, or does this …ISS executable work with the latest 12.9 version?
From: Calvin McDonald <7ndel3fr@gmail.com mailto:7ndel3fr@gmail.com > Sent: Saturday, November 26, 2022 1:25 PM To: Erich Eichmann <erich.eichmann@t-online.de mailto:erich.eichmann@t-online.de >; AMSAT-BB <AMSAT-BB@amsat.org mailto:AMSAT-BB@amsat.org > Subject: [AMSAT-BB] Re: SatPc32ISS problems with GREENCUBE
Erich,
Likewise, worked perfectly for me as well. I even got a ZL station! Thanks again for the SatPC32ISS-2 update.
Cal - N7AY
On 11/26/2022 11:21 AM, crohtun--- via AMSAT-BB wrote:
Erich,
I used the updated software for the GREENCUBE pass that started about 1420z today. Everything seemed to work well — 13 QSOs including four with Japanese stations. Thanks for your efforts!
73,
Ray KN2K
Sent from the all new AOL app for iOS https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661
On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann mailto:erich.eichmann@t-online.de erich.eichmann@t-online.de wrote:
Hi, I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.
The file can be downloaded here: www.dk1tb.de/SatPC32ISS_2.exe
or as zip file here: www.dk1tb.de/SatPC32ISS_2.zip http://www.dk1tb.de/SatPC32ISS_2.zip
Simply copy the file into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer. It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).
In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously). Don't set the interval too low! In Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction. That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.
The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.
If everything works, I will upload new setup files.
73s, Erich, DK1TB
participants (5)
-
Calvin McDonald -
cjhurst＠bigpond.net.au -
crohtun＠aol.com -
Erich Eichmann -
tjschuessler＠verizon.net