Re: my message from the other day....problem was in the radio. Somehow the satellite mode had become set such that the repeater offsets (+600 kHz or -5 MHz depending on band) activated on my uplink whenever SatPC32 sent a doppler frequency change during transmitting. Made it hard to find my signal, let alone make QSOs with computer control of frequency. Manual control of the radio worked fine. Go figure.
Full reset of the radio has solved the problem. Easily found my downlinks and made QSOs on AO-7 Mode B and VO-52 Mode B earlier this evening with computer control of my radio. Boy - do I wish I took the time to figure out how to do that!
Lesson: Problems with computer control of a radio are not always the fault of the computer or software.
For those who have seen my old garden-cart backyard portable AO-13 system, I'm reusing pieces of it. Same Yaesu G5400, but on a sawhorse this time, bottom section of the 70cm HyGain satellite antenna, and a 4 element KLM yagi I had for 2M. Landwher and ARR preamps, although I don't really need it on 2M and using it results in a S5-6 noise level on 2M when the antennas are pointing at my house or the neighbors. Now if I could just do something about all the trees my everyone (including me!) planted over the past 10+ years.
Nice to be back on the birds!
73 Steve KS1G [email protected]