Bill: Please share with ALL of us the info on the one you've settled on. I for one, will use it in the design of my terrestrial microwave system . . .
Thanks & 73, Jim wb4gcs@amsat.org
Bill Ress wrote:
Hi Juan,
Again - splendid data. Your testing has uncovered an important issue with the digital10 MHz oscillator. John, in a prior post has agreed to switch to an analog oscillator for rev B, so the issue is behind us, again thanks to your efforts. That also gets rid of the only BGA device on the board and that did cause you some gas pain early on in the assembly phase.
I'm sure John has leads on a analog suitable oscillator but I'll communicate with him with the info on the one I settled on.
Happy 4th to all...Bill - N6GHz
Juan Rivera wrote:
All,
I ran a Temperature Run on the 70cm Receiver in External Reference Mode. Click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Temperature_Run.htm for details...
73,
Juan
Via the Eagle mailing list courtesy of AMSAT-NA Eagle@amsat.org http://amsat.org/mailman/listinfo/eagle