July 2024 - pacsat-dev - mailman.amsat.org

Pacsat dev mtg 7/25/2024
by Bill 25 Jul '24

25 Jul '24

Partick Thomas will join us. He is our interface with the Fox-Plus-B mission. Pacsat dev mtg 7/25/2024 Thu, Jul 25, 2024 7:00 PM - 9:00 PM (CDT) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/525309253 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (408) 650-3123 - One-touch: tel:+14086503123,,525309253# Access Code: 525-309-253 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 525 309 253 Or dial directly: 525309253(a)67.217.95.2 or 67.217.95.2##525309253 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

Re: FoxPlus-B Conops doc
by Cameron Castillo 24 Jul '24

24 Jul '24

Hello, I looked through the Fox+ github and was able to find the BUS interface. Looks like they're using these <https://www.mouser.com/pdfdocs/qsh-1316995.pdf> connectors to interface with the bus. Can anyone confirm that these are correct or point me to where I might find that information? Additionally, does anyone have any info on the placement of the RF inputs and outputs? I have to do some floorplanning, and it would be helpful to know that before starting. See the attached rough placement (scaled proportionally to the actual board). The bus interface document is here <https://github.com/AMSAT-NA/fox-plus/tree/main/systems_engineering/bus_diag…>. Does anyone know which connections we'll be using back to the TMS570 so I can update the schematic? I'm sure we'll discuss tomorrow, but I'll make my own spreadsheet to keep track of it. Thanks! Cameron ------------------------------------------------- Cameron Castillo KJ7ILB *P*: (503) 752-8877 -------------------------------------------------- On Wed, Jul 24, 2024 at 8:49 AM Bill Reed via pacsat-dev < pacsat-dev(a)amsat.org> wrote: > > https://github.com/AMSAT-NA/fox-plus/blob/main/systems_engineering/Fox-Plus… > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

1 0

Re: config.h
by Chris Thompson 24 Jul '24

24 Jul '24

We know what most of them are and can work out the others. I agree the code should be better documented. Most of them came from the legacy code base. Added to the list to review and clean up: https://github.com/AMSAT-NA/PacSatSW/issues/40 73 Chris On Mon, Jul 22, 2024, 17:48 Bill Reed via pacsat-dev <pacsat-dev(a)amsat.org> wrote: > Can anyone explain what each of the settings in config.h do? > > Should we be able to explain this? > > Bill > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

1 0

FoxPlus-B Conops doc
by Bill Reed 24 Jul '24

24 Jul '24

https://github.com/AMSAT-NA/fox-plus/blob/main/systems_engineering/Fox-Plus…

1 0

Pacsat payload on Fox-Plus-B
by Bill Reed 24 Jul '24

24 Jul '24

I will invite Patrick Thomas to our Thur meetings. -------- Forwarded Message -------- Subject: Re: Pacsat payload Date: Sat, 20 Jul 2024 11:57:12 -0400 From: Mike Moore <k4mvm.22(a)gmail.com> To: Bill Reed <bill(a)brconnect.com> CC: Patrick Thomas <p-thomas(a)mindspring.com>, Eric Skoog <eric.n.skoog(a)gmail.com>, Jerry Buxton <vpe(a)amsat.us> Hi Bill, I agree. We have an engineer starting next week, Patrick Thomas, who will be tasked with planning the integration of ASCENT projects into Fox+ payloads. PACSAT will be the first one he will work on. He will produce an ICD. As you know, there are quite a few factors which will need to be taken into account. Power and size, and operational constraints such as the possibility of operation only in sunlight? PACSAT will likely interface with the OBC (the LIHU in Fox-Plus-B) via the PC104. Do you have a CONOPS for PACSAT? CONOPS, System Requirement Specs, and PC104 pinout specs (although it may need updating) for Fox+ can be found on github: https://github.com/AMSAT-NA/fox-plus/tree/main/systems_engineering. Thanks and 73, Mike K4MVM On 7/20/24 11:23, Bill Reed wrote: > Mike, > > We need to coordinate the pacsat payload for foxplus-2. > > Is there an ICD? > > Bill Reed > > 214 437-9555 >

1 0

config.h
by Bill Reed 22 Jul '24

22 Jul '24

Can anyone explain what each of the settings in config.h do? Should we be able to explain this? Bill

1 0

pacsat dev mtg 7/18/2024
by Bill 18 Jul '24

18 Jul '24

pacsat dev mtg 7/18/2024 Thu, Jul 18, 2024 7:00 PM - 9:00 PM (CDT) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/736010021 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (646) 749-3122 - One-touch: tel:+16467493122,,736010021# Access Code: 736-010-021 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 736 010 021 Or dial directly: 736010021(a)67.217.95.2 or 67.217.95.2##736010021 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

Re: Resolution - An Ax5043 is partially working on a Launchpad board (Issue #39)
by Burns Fisher (AMSAT) 17 Jul '24

17 Jul '24

Thanks, Jim. I forwarded your assessment to Rich in Golf to look at the loop issue for Golf too. 73, Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software* On Wed, Jul 17, 2024 at 6:26 PM Jim McCullers via pacsat-dev < pacsat-dev(a)amsat.org> wrote: > Chris, > > > > Partially working was your comment in the original assessment. > > I did a copy and paste on the subject for continuity. > > > > Jim > > > > > > Yes, very good. I agree with the suggested software changes. Note that > this code comes from GOLF so they should update it too, if they have not > already. If only we had common development and a library! Oh well. > > > > You say it is partially working. What part is still broken? > > > > 73 > > Chris > > > > On Wed, Jul 17, 2024, 12:15 Bill Reed via pacsat-dev <pacsat-dev(a)amsat.org> > wrote: > > WOW, good work. Good recommendations. Thanks. > > On 7/17/2024 10:04 AM, Jim McCullers via pacsat-dev wrote: > > See attached. > > > > > > ----------------------------------------------------------- > > > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > > View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > > Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

2 1

Re: Resolution - An Ax5043 is partially working on a Launchpad board (Issue #39)
by Jim McCullers 17 Jul '24

17 Jul '24

Chris, Partially working was your comment in the original assessment. I did a copy and paste on the subject for continuity. Jim Yes, very good. I agree with the suggested software changes. Note that this code comes from GOLF so they should update it too, if they have not already. If only we had common development and a library! Oh well. You say it is partially working. What part is still broken? 73 Chris On Wed, Jul 17, 2024, 12:15 Bill Reed via pacsat-dev <pacsat-dev(a)amsat.org <mailto:pacsat-dev@amsat.org> > wrote: WOW, good work. Good recommendations. Thanks. On 7/17/2024 10:04 AM, Jim McCullers via pacsat-dev wrote: See attached. ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org <mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org <mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org <mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org <mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

Re: Resolution - An Ax5043 is partially working on a Launchpad board (Issue #39)
by Chris Thompson 17 Jul '24

17 Jul '24

Yes, very good. I agree with the suggested software changes. Note that this code comes from GOLF so they should update it too, if they have not already. If only we had common development and a library! Oh well. You say it is partially working. What part is still broken? 73 Chris On Wed, Jul 17, 2024, 12:15 Bill Reed via pacsat-dev <pacsat-dev(a)amsat.org> wrote: > WOW, good work. Good recommendations. Thanks. > On 7/17/2024 10:04 AM, Jim McCullers via pacsat-dev wrote: > > See attached. > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

1 0

Re: Resolution - An Ax5043 is partially working on a Launchpad board (Issue #39)
by Bill Reed 17 Jul '24

17 Jul '24

WOW, good work. Good recommendations. Thanks. On 7/17/2024 10:04 AM, Jim McCullers via pacsat-dev wrote: > > See attached. > > > ----------------------------------------------------------- > > pacsat-dev mailing list --pacsat-dev(a)amsat.org > View archives of this mailing list athttps://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email topacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences athttps://mailman.amsat.org

1 0

Resolution - An Ax5043 is partially working on a Launchpad board (Issue #39)
by Jim McCullers 17 Jul '24

17 Jul '24

See attached.

1 0

Re: Next meeting is July 18.
by Fevig, Ronald 15 Jul '24

15 Jul '24

Hi Bill, I am not certain I can attend the July 18 meeting. I will be in Albuquerque involved in University Nanosatellite Program PI activities. I spoke to my student team today about the possibility of having one of them attend in my absence. If I cannot attend, would it be appropriate for me to send a UND student representative? 73 Ron N0UCV From: bill via pacsat-dev <pacsat-dev(a)amsat.org> Sent: Thursday, July 4, 2024 1:27 PM To: pacsat-dev(a)amsat.org Subject: [pacsat-dev] Next meeting is July 18. Sent from my Boost Samsung Galaxy A32 5G

1 0

Next meeting is July 18.
by bill 04 Jul '24

04 Jul '24

Sent from my Boost Samsung Galaxy A32 5G

1 0