Call "ForceInternalWatchdogTrigger". That prevents any other tasks from
running so after a few seconds, bang! The command to do that is "test
internal wd".
There is code for an external watchdog (i.e. using a wd chip outside of the
processor) but that won't be used on the Launchpad.
73,
Burns Fisher, WB1FJ
*AMSAT(R) Engineering -- Flight Software*
On Mon, Oct 2, 2023 at 4:18 PM Chris Thompson via pacsat-dev <
pacsat-dev(a)amsat.org> wrote:
> I made some changes to allow the watchdog to be started. Once I added
> some calls to the Uplink task and removed the CAN task from the wdReports
> list it stopped rebooting in a loop due to the watchdog.
>
> I now have it running with the watchdog enabled but I can't cause it to
> trigger the watchdog from a task. So I either don't understand what needs
> to be done or the watchdog is not working properly.
>
> The watchdog enabled code is checked into g0kla_watchdog
>
> If there is a simple line of code to trigger the watchdog then let me
> know. I was just trying to add a suitable delay.
>
> 73
> Chris
>
> --
> Chris E. Thompson
> chrisethompson(a)gmail.com
> g0kla(a)arrl.net
>
> -----------------------------------------------------------
>
> pacsat-dev mailing list -- pacsat-dev(a)amsat.org
> View archives of this mailing list at
> https://mailman.amsat.org/hyperkitty/list/[email protected]
> To unsubscribe send an email to pacsat-dev-leave(a)amsat.org
> Manage all of your AMSAT-NA mailing list preferences at
> https://mailman.amsat.org
>
I made some changes to allow the watchdog to be started. Once I added some
calls to the Uplink task and removed the CAN task from the wdReports list
it stopped rebooting in a loop due to the watchdog.
I now have it running with the watchdog enabled but I can't cause it to
trigger the watchdog from a task. So I either don't understand what needs
to be done or the watchdog is not working properly.
The watchdog enabled code is checked into g0kla_watchdog
If there is a simple line of code to trigger the watchdog then let me
know. I was just trying to add a suitable delay.
73
Chris
--
Chris E. Thompson
chrisethompson(a)gmail.com
g0kla(a)arrl.net
Thanks Mark.
That’s good to know and close enough.
Jim McCullers
WA4CWI
Hi all. The output power was around 1-4 Watts, command able. I can look it up if y’all really need the info.
73,
Mark L. Hammond [N8MH]
On Mon, Oct 2, 2023 at 2:34 PM Jim McCullers via pacsat-dev <pacsat-dev(a)amsat.org <mailto:[email protected]> > wrote:
Uplinks 4 1200 3.5 KHz deviation Manchester encoded FSK
Downlink 1 1200 BPSK Several watts output power. Not very specific.
https://www.om3ktr.sk/druzice/microsat.html
--
Chris E. Thompson
chrisethompson(a)gmail.com <mailto:[email protected]>
g0kla(a)arrl.net <mailto:[email protected]>
-----------------------------------------------------------
pacsat-dev mailing list -- pacsat-dev(a)amsat.org <mailto:[email protected]>
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected]
To unsubscribe send an email to pacsat-dev-leave(a)amsat.org <mailto:[email protected]>
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Hi all. The output power was around 1-4 Watts, command able. I can look it
up if y’all really need the info.
73,
Mark L. Hammond [N8MH]
On Mon, Oct 2, 2023 at 2:34 PM Jim McCullers via pacsat-dev <
pacsat-dev(a)amsat.org> wrote:
> Uplinks 4 1200 3.5 KHz deviation Manchester encoded
> FSK
>
> Downlink 1 1200 BPSK Several watts output power. Not
> very specific.
>
>
>
> https://www.om3ktr.sk/druzice/microsat.html
>
>
>
>
>
> --
>
> Chris E. Thompson
> chrisethompson(a)gmail.com
> g0kla(a)arrl.net
>
> -----------------------------------------------------------
>
> pacsat-dev mailing list -- pacsat-dev(a)amsat.org
> View archives of this mailing list at
> https://mailman.amsat.org/hyperkitty/list/[email protected]
> To unsubscribe send an email to pacsat-dev-leave(a)amsat.org
> Manage all of your AMSAT-NA mailing list preferences at
> https://mailman.amsat.org
>
Chris:
I can supply the following:
1 TM570 dev board with pacsat daughter board.
1 Windows 10 laptop with groundstation and direwolf.
1 Ubuntu laptop with groundstation and direwolf
2 TM-V71 radios for groundstation
1 pair of Baofeng radios w/TARPN TNC for groundstation
1 Signalink USB to TM-V71
1 Digirig USB to TM-V71
2 2/70 antennas with magmount
1 tripod with 2/70 base station antenna
1 SEC-1223 base station 12v power with anderson powerpole conn
1 5v power for TARPN TNC
Other misc cables?
Let me know how I can help.
Bill
Just a quick announcement... Mouser delivered 25 x TMS5700914APGEQQ1
MCUs. We have some stock!
Jonathan
--
Jonathan Brandenburg
Radio Amateur Satellite Corporation
1-214-213-1066
I'm in another meeting. Will be there as soon as I can.
73,
Burns Fisher, WB1FJ
*AMSAT(R) Engineering -- Flight Software*
On Thu, Sep 28, 2023 at 4:25 PM Bill via pacsat-dev <pacsat-dev(a)amsat.org>
wrote:
> Pacsat dev mtg 9/28/2023
> Thu, Sep 28, 2023 7:00 PM - 9:00 PM (CDT)
>
> Please join my meeting from your computer, tablet or smartphone.
>
> https://meet.goto.com/407544973
>
> You can also dial in using your phone.
> (For supported devices, tap a one-touch number below to join instantly.)
>
> United States: +1 (571) 317-3122
> - One-touch: tel:+15713173122,,407544973#
>
> Access Code: 407-544-973
>
> Join from a video-conferencing room or system.
> Dial in or type: 67.217.95.2 or inroomlink.goto.com
> Meeting ID: 407 544 973
> Or dial directly: 407544973(a)67.217.95.2 or 67.217.95.2##407544973
>
>
> Get the app now and be ready when your first meeting starts:
> https://meet.goto.com/install
>
>
>
> -----------------------------------------------------------
>
> pacsat-dev mailing list -- pacsat-dev(a)amsat.org
> View archives of this mailing list at
> https://mailman.amsat.org/hyperkitty/list/[email protected]
> To unsubscribe send an email to pacsat-dev-leave(a)amsat.org
> Manage all of your AMSAT-NA mailing list preferences at
> https://mailman.amsat.org
>
Pacsat dev mtg 9/28/2023
Thu, Sep 28, 2023 7:00 PM - 9:00 PM (CDT)
Please join my meeting from your computer, tablet or smartphone.
https://meet.goto.com/407544973
You can also dial in using your phone.
(For supported devices, tap a one-touch number below to join instantly.)
United States: +1 (571) 317-3122
- One-touch: tel:+15713173122,,407544973#
Access Code: 407-544-973
Join from a video-conferencing room or system.
Dial in or type: 67.217.95.2 or inroomlink.goto.com
Meeting ID: 407 544 973
Or dial directly: 407544973(a)67.217.95.2 or 67.217.95.2##407544973
Get the app now and be ready when your first meeting starts:
https://meet.goto.com/install
