- pacsat-dev - mailman.amsat.org

Pacsat dev mtg 11/16/2023
by Bill 16 Nov '23

16 Nov '23

Pacsat dev mtg 11/16/2023 Thu, Nov 16, 2023 7:00 PM - 9:00 PM (CST) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/540413653 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (872) 240-3311 - One-touch: tel:+18722403311,,540413653# Access Code: 540-413-653 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 540 413 653 Or dial directly: 540413653(a)67.217.95.2 or 67.217.95.2##540413653 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

PacSat help commannds
by Jim McCullers 10 Nov '23

10 Nov '23

In Thursday night's meeting we discussed the current PacSat command process and how to obtain a command list while running. Below are the four help commands that list the available commands by category. Help List common commands Helpall List all commands Helpdevo List commands for software developers Helpsetup List commands for setting up new board As these commands are legacy, at some point we may want to consider removing commands that are not specific to PacSat and adding those we require as Chris and I have done. Jim McCullers WA4CWI

1 0

LaunchPad Protective box in mm
by Bob Stricklin 10 Nov '23

10 Nov '23

This is the LaunchPad base box with updated dimensions and in millimeters. Bob

1 0

Pacsat dev mtg 11/9/2023
by Bill 09 Nov '23

09 Nov '23

Pacsat dev mtg 11/9/2023 Thu, Nov 9, 2023 7:00 PM - 9:00 PM (CST) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/587059365 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (224) 501-3412 - One-touch: tel:+12245013412,,587059365# Access Code: 587-059-365 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 587 059 365 Or dial directly: 587059365(a)67.217.95.2 or 67.217.95.2##587059365 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

PACSAT (Oscar-16) Frequencies
by Jim McCullers 03 Nov '23

03 Nov '23

The original PACSAT (Oscar-16) frequencies were: Uplink: 145.900 - 145.920 - 145.940 - 145.960 Downlink: 437.050 The QST reference article used caps on both the PACSAT and OSCAR names. 73, Jim McCullers WA4CWI

1 0

Pacsat-dev mtg 11/2/2023
by Bill 02 Nov '23

02 Nov '23

Pacsat-dev mtg 11/2/2023 Thu, Nov 2, 2023 7:00 PM - 9:00 PM (CDT) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/587853741 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (224) 501-3412 - One-touch: tel:+12245013412,,587853741# Access Code: 587-853-741 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 587 853 741 Or dial directly: 587853741(a)67.217.95.2 or 67.217.95.2##587853741 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

Re: pacsat dev mtg 10-26-2023
by Corey Minyard 26 Oct '23

26 Oct '23

On Thu, Oct 26, 2023 at 06:29:07PM +0000, Bill via pacsat-dev wrote: > > I cannot attend this evening. Bob Stricklin will host tonight. I also cannot attend, I'll be on the road. Sounds like the presentation went great. Talk to you next week. -corey > > pacsat dev mtg 10-26-2023 > Thu, Oct 26, 2023 7:00 PM - 9:00 PM (CDT) > > Please join my meeting from your computer, tablet or smartphone. > > https://meet.goto.com/821196965 > > You can also dial in using your phone. > (For supported devices, tap a one-touch number below to join instantly.) > > United States: +1 (872) 240-3212 > - One-touch: tel:+18722403212,,821196965# > > Access Code: 821-196-965 > > Join from a video-conferencing room or system. > Dial in or type: 67.217.95.2 or inroomlink.goto.com > Meeting ID: 821 196 965 > Or dial directly: 821196965(a)67.217.95.2 or 67.217.95.2##821196965 > > > Get the app now and be ready when your first meeting starts: > https://meet.goto.com/install > > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

pacsat dev mtg 10-26-2023
by Bill 26 Oct '23

26 Oct '23

I cannot attend this evening. Bob Stricklin will host tonight. pacsat dev mtg 10-26-2023 Thu, Oct 26, 2023 7:00 PM - 9:00 PM (CDT) Please join my meeting from your computer, tablet or smartphone. https://meet.goto.com/821196965 You can also dial in using your phone. (For supported devices, tap a one-touch number below to join instantly.) United States: +1 (872) 240-3212 - One-touch: tel:+18722403212,,821196965# Access Code: 821-196-965 Join from a video-conferencing room or system. Dial in or type: 67.217.95.2 or inroomlink.goto.com Meeting ID: 821 196 965 Or dial directly: 821196965(a)67.217.95.2 or 67.217.95.2##821196965 Get the app now and be ready when your first meeting starts: https://meet.goto.com/install

1 0

Re: Plastic boxes for Prototype board and the CubSat sized prototype
by Bob Stricklin 26 Oct '23

26 Oct '23

I just realized I put the support for the USB connector on the wrong end so I have changed it in this version. A new file may also solve your issue. Bob On Oct 26, 2023, at 11:46 AM, Bob Stricklin via pacsat-dev <pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org>> wrote: Hummm, I did this in Solidworks using inches. The box should be 5.16 inches by 2.66 inches by .46 inches. These are the other dimensions. Is there an option for you to select inches or mm in your software. I could export this in other formats or in mm if that would help. Bob On Oct 26, 2023, at 10:34 AM, Chris Thompson <chrisethompson(a)gmail.com<mailto:chrisethompson@gmail.com>> wrote: Bob, It looks like the size of the box was lost in the export. The STL box is 2.9 x 0.46 x 5.41 mm and will use just 0.44cm of filament according to my slicer. That does not sound right. When I load it into the printer I can not see the box on the preview. I can try to scale it up but not sure what factor to use. 73 Chris On Thu, Oct 26, 2023 at 11:07 AM Bob Stricklin via pacsat-dev <pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org>> wrote: Chris, Here are STL files. The 64kb file is the box for the prototype board you have. Let me know if you see any changes that need to be made. The think the SMA antenna landing places on the larger box will need to be changed. Bob On Oct 26, 2023, at 9:47 AM, Chris Thompson via pacsat-dev <pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org>> wrote: Bob, Very interesting. If you send over the STL files then I will try printing it here. It would be nice to have a box. 73 Chris On Thu, Oct 26, 2023, 10:21 Bob Stricklin via pacsat-dev <pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org>> wrote: All, As some of you know, I managed to break the USB connector off the prototype board while taking it to the AMSAT symposium. I have repaired it by cutting the end off a USB cable and soldering the leads on directly. It's a little kluge but working. To protect my connections and to protect the board a little I designed a box and that will be 3D printed. If this works out and you want one for your board I can pass along the info later. It will take about two weeks to get the box and check it out. There is an area provided for the USB connector. The connector on the PCB will come off without a lot of angular pulling force. Also designed a box for the larger CubeSat prototype. Attaching a copy of this too. I add two places to mount an SMA connector for antennas which may be a stiff piece of wire or connected to a remote antenna. I have order one of these to try out. This is a half baked idea and open for suggestions about how to improve on it. I have two covers one for each side so you can get access to parts for testing or changes. The cost for me to make all four parts is about $46 including shipping and handling. I use something called Craftcloud.com<http://craftcloud.com/>. Bob ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org<mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/> ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org<mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/> ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org<mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/> -- Chris E. Thompson chrisethompson(a)gmail.com<mailto:chrisethompson@gmail.com> g0kla(a)arrl.net<mailto:g0kla@arrl.net> ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev(a)amsat.org<mailto:pacsat-dev@amsat.org> View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave(a)amsat.org<mailto:pacsat-dev-leave@amsat.org> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

Re: Plastic boxes for Prototype board and the CubSat sized prototype
by Chris Thompson 26 Oct '23

26 Oct '23

Bob, It looks like the size of the box was lost in the export. The STL box is 2.9 x 0.46 x 5.41 mm and will use just 0.44cm of filament according to my slicer. That does not sound right. When I load it into the printer I can not see the box on the preview. I can try to scale it up but not sure what factor to use. 73 Chris On Thu, Oct 26, 2023 at 11:07 AM Bob Stricklin via pacsat-dev < pacsat-dev(a)amsat.org> wrote: > Chris, > > Here are STL files. The 64kb file is the box for the prototype board you > have. > Let me know if you see any changes that need to be made. > > The think the SMA antenna landing places on the larger box will need to be > changed. > > > Bob > > > > > > On Oct 26, 2023, at 9:47 AM, Chris Thompson via pacsat-dev < > pacsat-dev(a)amsat.org> wrote: > > Bob, > > Very interesting. If you send over the STL files then I will try printing > it here. It would be nice to have a box. > > 73 > Chris > > On Thu, Oct 26, 2023, 10:21 Bob Stricklin via pacsat-dev < > pacsat-dev(a)amsat.org> wrote: > > All, > > As some of you know, I managed to break the USB connector off the > prototype board while taking it to the AMSAT symposium. > I have repaired it by cutting the end off a USB cable and soldering the > leads on directly. It's a little kluge but working. > > To protect my connections and to protect the board a little I designed a > box and that will be 3D printed. If this works out > and you want one for your board I can pass along the info later. It will > take about two weeks to get the box and check it out. > There is an area provided for the USB connector. The connector on the PCB > will come off without a lot of angular pulling force. > > Also designed a box for the larger CubeSat prototype. Attaching a copy of > this too. I add two places to mount an SMA connector for antennas > which may be a stiff piece of wire or connected to a remote antenna. I > have order one of these to try out. This is a half baked idea and open for > suggestions about > how to improve on it. I have two covers one for each side so you can get > access to parts for testing or changes. > > The cost for me to make all four parts is about $46 including shipping and > handling. I use something called Craftcloud.com <http://craftcloud.com/>. > > Bob > > > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org > > > > ----------------------------------------------------------- > > pacsat-dev mailing list -- pacsat-dev(a)amsat.org > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org > To unsubscribe send an email to pacsat-dev-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org > -- Chris E. Thompson chrisethompson(a)gmail.com g0kla(a)arrl.net

2 1