The 5043 has a clock output that is a programmable divider off the internal oscillator.
That would as you say reduce reliability.
TCXO fanout is common but I have no experience and I researched the subject at a high level without digging in .
Jim McCullers
WA4CWI
If I recall, the 5043 also has an OSC Out capability so they might daisy-chain. Of course that makes them less independent.
73,
Burns Fisher, WB1FJ
AMSAT(R) Engineering -- Flight Software
On Thu, Nov 17, 2022 at 3:24 PM Jim McCullers <wa4cwi@bellsouthnet mailto:[email protected] > wrote:
That’s essentially what I’ve been thinking for the overall design.
The TCXO fanout might be interesting. I’m not knowledgeable concerning TCXO loading factors. One good thing is the board doesn’t require clock synchronization.
Jim McCullers
WA4CWI
Attached is a first cut at a block diagram.
Bob
----------------------------------------------- pacsat-dev mailing list -- [email protected] mailto:[email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] mailto:[email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org