Even though you think the frequency is correct, you might try adjusting the xmit frequency up and down slightly to see if that has an effect.
On Fri, Apr 28, 2023, 2:12 PM Chris Thompson via pacsat-dev < [email protected]> wrote:
Yep, good idea Rich.
In my test setup the RSSI for 70cm is about 180. For 2m it is 200. Maybe it is too strong and causing distortion? Do we know the valid range? To test I put in 10dB and then 20dB of attenuation and dropped it to 190 and then 180 but it is not more reliable. The background noise is hovering around 150.
73 Chris
On Fri, Apr 28, 2023 at 12:10 PM Rich Gopstein via pacsat-dev < [email protected]> wrote:
For fun, you can check the RSSI while receiving on both bands. Might tell you something...
On Fri, Apr 28, 2023 at 12:04 PM Jim McCullers via pacsat-dev < [email protected]> wrote:
Chris,
I assume you are referring to packets you are generating locally.
I’ve only tested with the Pi boards and noticed no difference with locally generated signals between the 70cm board and the 2-meter board after getting the frequency correct.
My 2-meter Pi board appear a bit deaf on signals from the local APRS digipeters.
Guess I need to get the LaunchPad set up.
I’ll review the schematic on the daughter board but the schematic should be identical to the Pi schematic.
Let me explore.
73
Jim
Jim,
I have the AX5043 working on 145.835. It ranges correctly and receives packets. At least it receives them some of the time. It seems to be quite deaf compared to wje it was working on 436.8, which is my 70cm RX frequency. That receives every packet without error.
I had the same issue on 70cms until you told me to tweak the frequency. But with the TXCO it seems to be right on frequency. I ran a test to TX on the RX frequency and it seems to be correct according to my TinySA.
thoughts?
73
Chris
--
Chris E. Thompson [email protected] [email protected]
pacsat-dev mailing list -- [email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
pacsat-dev mailing list -- [email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
-- Chris E. Thompson [email protected] [email protected]
pacsat-dev mailing list -- [email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org