I looked at the schematic of the 5500, both az & El indicators are fed from the same voltage regulator, so if one works then the trouble is in the other circuit. The schematic was a rough copy, regulator appeared to be a 7806, so if correct then a steady 6v out to one pin of each feedback potentiometer. Wiper of each pot comes back to the control box to give position. 3rd pin of each pot is chassis ground. Use your DMM & perform some basic troubleshooting, let us know what you find. If I recall correctly the feedback potentiometers are 500 ohms. Happy to try to help you further once you have some information.
On Mon, Aug 28, 2023, 7:05 AM mikflathead--- via AMSAT-BB < [email protected]> wrote:
I would switch the azimuth to the elevation side and see if that works. Mike
On Monday, August 28, 2023 at 07:45:26 AM EDT, Vincenzo Mone via AMSAT-BB < [email protected]> wrote:
Hi all,
Please I have actually a Yaesu G-5500B Rotator that
The azimuth does not respond properly.
I wanted to try to understand if the problem depended on the control box or the rotor.
A friend of mine has a Yaesu G-5600 rotor and I wanted to know if I could use his G-5600
control box under my G-5500 rotors without damaging both his friend's control box and my rotor.
I also noticed that the instruments of the two control boxes are different,
Please any help will be really appreciated
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** *********************************
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org