Many of you helped me to sort out my setup issues with the IC-9700 with SatPC32 and WSJT-X. Now I'm trying to sort out how to get the SatPC32 scope also working which seems to be a problem. I can get it working without using WSJT-X but as soon as I set that up I'm out of ports that are available at the 115200 baud rate which is required I think for the SatPC32 scope. The comports I have to work with are:
11 - assigned to WSJT-X 12 - assigned to SatPC32 113 - CI-V
I just double checked and tried some other options just to make sure I wasn't cluttering up this list, and now it seems I have no scope on SatPC32 at all even in Configuration #3 where it was working. I'm stumped.
Rick, W2JAZ
Rick, I’m actually trying to figure out what you want to run at the same time. ?
You need to use the USB cable/com port for SatPC32 spectrum. Then if you want Radio control of the 9700, you must also use a CI-V converter cable/com port to the REMOTE port of the 9700 (1/8” jack). Then you can use radio control in SatPC32 at the same time as the spectrum. Then you could use WSJT-X without any radio control. There is a good document on the AMSAT webpage that walks you through it. You’ll Have to search, I’m mobile.
Or, exit SatPC32, and then you should be able to have WSJT-X use either of the ports above.
Just don’t try to use a port twice!
Mark N8MH
On Wed, Jan 5, 2022 at 5:30 PM Richard Lawn [email protected] wrote:
Many of you helped me to sort out my setup issues with the IC-9700 with SatPC32 and WSJT-X. Now I'm trying to sort out how to get the SatPC32 scope also working which seems to be a problem. I can get it working without using WSJT-X but as soon as I set that up I'm out of ports that are available at the 115200 baud rate which is required I think for the SatPC32 scope. The comports I have to work with are:
11 - assigned to WSJT-X 12 - assigned to SatPC32 113 - CI-V
I just double checked and tried some other options just to make sure I wasn't cluttering up this list, and now it seems I have no scope on SatPC32 at all even in Configuration #3 where it was working. I'm stumped.
Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Here is the document, via DK1TB website!
http://www.dk1tb.de/IC9700_Setup.pdf
Mark N8MH
On Wed, Jan 5, 2022 at 7:01 PM Mark L. Hammond [email protected] wrote:
Rick, I’m actually trying to figure out what you want to run at the same time. ?
You need to use the USB cable/com port for SatPC32 spectrum. Then if you want Radio control of the 9700, you must also use a CI-V converter cable/com port to the REMOTE port of the 9700 (1/8” jack). Then you can use radio control in SatPC32 at the same time as the spectrum. Then you could use WSJT-X without any radio control. There is a good document on the AMSAT webpage that walks you through it. You’ll Have to search, I’m mobile.
Or, exit SatPC32, and then you should be able to have WSJT-X use either of the ports above.
Just don’t try to use a port twice!
Mark N8MH
On Wed, Jan 5, 2022 at 5:30 PM Richard Lawn [email protected] wrote:
Many of you helped me to sort out my setup issues with the IC-9700 with SatPC32 and WSJT-X. Now I'm trying to sort out how to get the SatPC32 scope also working which seems to be a problem. I can get it working without using WSJT-X but as soon as I set that up I'm out of ports that are available at the 115200 baud rate which is required I think for the SatPC32 scope. The comports I have to work with are:
11 - assigned to WSJT-X 12 - assigned to SatPC32 113 - CI-V
I just double checked and tried some other options just to make sure I wasn't cluttering up this list, and now it seems I have no scope on SatPC32 at all even in Configuration #3 where it was working. I'm stumped.
Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
--
Mark L. Hammond [N8MH]
--
Mark L. Hammond [N8MH]
-
Mark L. Hammond -
Richard Lawn