Bob:
Attached are three pdf views of the proposed revised Eagle module, and open view, fully closed view, and a view w/o the PCB. It has been a lengthy day getting all of the darned 0.5mm cover bends correct and holes properly placed for full mating of the cover with the baseplate (such things as 0.581mm hole placement discrepancies - ugh!). If built from the drawings that can be made from these objects, there should be a good fit in the real hardware.
I do not presume as to what the "real" next step wants to be, as I do not propose to make the 2D drawings until the discussions have settled down to agree that this is what we collectively like, or at least collectively accept. Please advise.
'73, Dick Jansson, KD1K mailto:[email protected] [email protected] mailto:[email protected] [email protected]