January 2007 - AMSAT-BB - mailman.amsat.org

TV antenna rotators
by Tim Tapio 08 Apr '07

08 Apr '07

Do any of them offer full 360 degree rotation. I picked up a channel master, it only travels 180.. 73 de Tim, K4SHF

6 5

My first Posit via PCSAT for a long time
by Robert Bruninga 18 Feb '07

18 Feb '07

Yes, PCSAT-1 is working great. I was driving through Tennessee on Friday, and saw a PCSAT-11 packet on the normal North Americal 144.39 frequency and so I quickly QSY'ed to 145.825 and in my mobile with a magmount, my D700 radio captured 12 stations via PCSAT-1 and 10 messages/bulletins to the radio front panel. PCSAT-1 has a 1 minute beacon on 144.39 over North America so that people in low-QRM areas might see when PCSAT is in view for just this purpose. There is no 144.39 uplink, of course, since all the satellite would hear is 10,000 jammed packets in space. Later, I just left my radio on overnight on 145.825 and captured similarly a dozen stations. (Be sure to set your RANGE limit back to 0, or the D700 will ignore all packets coming from too far away...)... De WB4APR, Bob > On Behalf Of Ian Mills > Sent: Friday, January 12, 2007 8:26 PM > > Well, I was pleasantly surprised this afternoon as I managed > quite easily to have my position received via PCSAT. > I drive two hours to and from work and I have been monitoring > PCSAT... so I fired off my position via a THD-7 into a 30w > amp attached to a 1/4 wave rod antenna on my car. > ...the following from findu confirms I got through: > > VK2HIM-7>S4T3W2,PCSAT-1*,WIDE2-2,qAo,VK3JTM-5:`NM_!6>/>"3w} > VK2HIM-7>S4T4V8,PCSAT-1,VK7HSE-1,VK7RAD,WIDE2*,qAo,VK7HDM-12:` > NM @5>/>"4.}On UHF repeater > VK2HIM-7>S4T4X1,PCSAT-1,VK7HSE-1,VK7RAD,WIDE2*,qAo,VK7HDM-12:` > NMKnf~>/>"4:} > > The last time I tried was over a year ago and I didn't have > any trouble then either, and this was using the 5W THd7 > without a 30w amp!! > > Cheers > Ian > vk2him > AWA Limited > _______________________________________________ > Ozaprs mailing list > Ozaprs(a)aprs.net.au > http://aprs.net.au/mailman/listinfo/ozaprs >

3 3

Last AO51 pass 0110 z Unbelievable Ignorance ( Flame)
by sraas＠optonline.net 02 Feb '07

02 Feb '07

How in the world is is even remotely possible that people hold a conversation on the bird knowing that there are 70 people ( probabally more like 170) using the bird for quick contacts? HOW IS THIS EVEN POSSIBLE.. I cant imagine the ignorace involved... I just cannot fathom it. -Steve Raas N2JDQ FN20vg

8 7

Ham radio in Films & TV ?
by Paul Reilly 31 Jan '07

31 Jan '07

Hello again, I am looking for any references where ham radio is featured in popular culture, particularly movies, and TV. For example there was a bit of it in the movie "Contact" based on Carl Sagan's book of the same name. Has anyone got an other references like this? Thank you. Paul

15 15

AMSAT QSL Bureau...
by Frank A Cahoy 31 Jan '07

31 Jan '07

I am currently not QRV on any of the satellites. Mainly an AZ rotor problem.... Holding my breath for P3E!!! I would be pleased to help in any way possible and would volunteer to be the 0..(zero) bureau sorter if that will be of any help. When we actually do get an HEO bird into orbit maybe we can expand this to include DX "helpers". Just a thought. Postage rates everywhere are getting very expensive and any way to help would be appreciated by all, I believe. 73 to all... CU soon on P3E............... Frank, K0BLT

1 0

Pehuensat-1 telemetry
by john heath 31 Jan '07

31 Jan '07

Hi, On behalf of the telemetry enthusiasts on the bb thanks to Mike and Mineo for sharing their expertise. I now have MixW set up and ready for tonights passes. Whilst listening for Pehuensat you may hear UO-11. Give it a try with MixW. Here are the settings from Clive G3CWV MODE RTTY Not inverted RX frequency 1800 Baudrate 1200 Shift 1200 Character set ASCII-7 Not inverted More details and decode software on Clive's site www.users.zetnet.co.uk/clivew/ 73 John G7HIA

1 0

Two more FCAL packetsesss
by mcguire＠stensat.org 31 Jan '07

31 Jan '07

I went through my recorded FCAL passes for this week. I managed to extract packets from two passes: 2007jan28 06:57 EST 1:Fm KD4HBO To TELEM Via TELEM <UI pid=F0 Len=56 >[xx:xx:xx] 0031E4CFFFFFF98023002C0FFFEFEE80003FF98FFFEFFA0FFFFFE40 2007jan29 00:51 EST 1:Fm KD4HBO To TELEM Via TELEM <UI pid=F0 Len=57 >[xx:xx:xx] Analog 000400FF00F100DA00B0000800DF000E N 0000001E I've got a couple more audio files that contain good candidate packets, but the AGW packet engine doesn't decode them (and doesn't indicate why.) I'll try to alter the filter profile I'm using to see if that helps. Regards, Jim3 KB3MPL

1 0

Re: SatPC32 question
by Wayne Estes 31 Jan '07

31 Jan '07

John Becker wrote: running version 12.5 under setup > rotor setup - where is uni-trac hidden? Wayne replies: I don't use Uni-Trac so I'm not an authority on the subject. Uni-Trac is controlled by its own stand-alone program, using a DDE connection to continuously obtain the position data from SatPC32. According to section "II" of the SatPC32 manual, you need to copy a file called RotorServer.sqf into the main SatPC32 directory. I presume that the DDE rotor function is always enabled when that program is in the main SatPC32 directory. What I'm not sure about is WHICH of several RotorServer.sqf files is the correct one to use for DDE. Perhaps Erich Eichmann or a SatPC32/Uni-Trac user can clarify... Wayne Estes W9AE Oakland, Oregon, USA, CN83ik

1 0

Nice AO-27 qso
by sraas＠optonline.net 31 Jan '07

31 Jan '07

Just worked HR9/N5AFV in EK66, on an island just off the north coast of Honduras. This is quite the warm welcome to working sat's thats for sure! I think he was experiencing some microphone difficulty, as after I worked him N9EAW attempted to work him and all that was sent after EAW's calls were short carriers, with a blip of audio. I hope he gets this fixxed.. as I know many many people would love to work him there. I cant wait for the HEO's! Working DX is soo much fun! Especially on the sats! -Steve Raas N2JDQ FN20vg AMSAT 36396

3 2

Re: AMSAT-NA QSL Beuro - Some Ideas and thoughts
by sraas＠optonline.net 31 Jan '07

31 Jan '07

Keep in mind this is all 100% Unoffical as of now, I do already have a volenteer for the 7th Call district. I am going to create a word document for proposal to the powers to be, in regards to this.. I think everyone could benifit and I hope the interest is there. I will keep everyone informed in regards to any further volenteer offers I recieve about handeling a call district. Thank You Steve Raas N2JDQ FN20vg

1 0