November 2007 - AMSAT-BB - mailman.amsat.org

Logging software
by Ed Tump 26 Nov '07

26 Nov '07

Folks, What logging software works nice with satellite contacts? Thanks. 73, Ed KC9GWK Grid EN52 AmSat Member

4 3

AMSAT.org website - where to donate?
by John Mock KD6PAG 26 Nov '07

26 Nov '07

I want to make a small donation to AMSAT-NA (specifically for satellites which would accessible on a world-wide basis). But, alas, i could only information about membership and the "President's Club" on-line. Did i miss something?? It seems like it might be a missed opportunity not to have information on-line about making a one-time-only donation. -- KD6PAG (Networking Old-Timer, Satellite QRPer)

1 0

I: [amsat-bb] AO-51 pass --CS5CEP - Centro Espacial Português--
by Francesco Grappi 26 Nov '07

26 Nov '07

Hi Carles, thank you for the informations 73" Francesco Grappi IW4DVZ -----Messaggio originale----- Da: amsat-bb-bounces(a)amsat.org [mailto:amsat-bb-bounces@amsat.org] Per conto di EB3SA - Carles Inviato: lunedì 26 novembre 2007 19.30 A: 'AmSat BB' Oggetto: [amsat-bb] AO-51 pass --CS5CEP - Centro Espacial Português-- Hi to all This Evening in AO-51 over Europe , active: CS5CEP - Centro Espacial Português http://www.leme.org.pt/~galileu/PmWiki/index.php?n=Main.HomePage 73´s -- Carles Roy eb3sa(a)eb3sa.com www.eb3sa.com _______________________________________________ Sent via AMSAT-BB(a)amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

1 0

AO-51 pass --CS5CEP - Centro Espacial Português--
by EB3SA - Carles 26 Nov '07

26 Nov '07

Hi to all This Evening in AO-51 over Europe , active: CS5CEP - Centro Espacial Português http://www.leme.org.pt/~galileu/PmWiki/index.php?n=Main.HomePage 73´s -- Carles Roy eb3sa(a)eb3sa.com www.eb3sa.com

1 0

Re: [eu-amsat] The solution.
by Luc Leblanc 26 Nov '07

26 Nov '07

On 25 Nov 2007 at 19:48, SV1BSX wrote: > Luc, > > as John said, grease is very significant. > I found some interesting Emails about it. Take a look. > > 73, Mak SV1BSX > > ============================================== > =========================>>>>>>>>>>>>>>>>>>>> Many Thank's Mak Our outside temperature is now +1C and the rotor is working it is confirm water in in the casing and probably gets in by the drain hole that i never found on my unit and if there is any he will be at the top offering a very good moisture access point. Is it also possible that humidity succeed to form inside by temperature variation and or by entering by the joingning sections. My model a Yaesu G-550 looks like the same as the Kenpro KR-500 and does not seems to have any drainage hole in the casing but this will have to be visually confirm. Looking at the exploded inside schematic picture of the rotor it seems that it is possible to drill a hole in the casing to drain this excess water? Could be someone who open one can confirm if there is enough clearance to avoid drilling through the gear/motor system? Thank's for all your advices and for all the private one too. Luc Leblanc VE2DWE Skype VE2DWE www.qsl.net/ve2dwe WAC BASIC CW PHONE SATELLITE

1 0

Re: Mast strength??
by Greg Beat 26 Nov '07

26 Nov '07

Charles Penninger (Penninger Radio) has that "in stock" in western Chicago suburbs (15 miles west of my QTH) You likely also have a local aluminum tubing supplier / distributor in your area -- without having to pay for the shipping charges. 1/8" wall is very nice -- and surprising lightweight for its strength. At the 2 inch diameter size you can use either 1/8" or 1/4" wall http://www.penninger.com/prod05.htm Greg w9gb Date: Thu, 22 Nov 2007 14:13:57 -0500 From: "Stargate" <stargatesg1(a)verizon.net> Subject: [amsat-bb] Mast strength?? To: "Amsat-Bb" <amsat-bb(a)amsat.org> Message-ID: <HLENIILIDNGDDDJIDEMFGEMGENAA.stargatesg1(a)verizon.net> Content-Type: text/plain; charset=iso-8859-1 Hi all, I am installing 20' of Rohn 45 with a flat top from Normsfab and a Yaesu GS-065 thrust bearing. The lower end of the tower is already figured out but I'm not sure of what strength 2" mast I need. All this short tower will be supporting is a 3-4 element 6M homebrew beam just above the bearing on the tower, as well as, the elevation portion of the Yaesu G-5500 rotor with 8' fiberglass cross mast, and M2 2MCP22, and 436CP42UG beams on each end of the cross boom. The 2MCP22 is 2.5 sq ft wind load. The 436CP42UG is 2.0 sq ft wind load. I'm not sure of the WL for the rotor and 6M beam. The mast will have to be at least 18'-20' long to give 2-3 foot inside the tower to the AZ rotor and enough sticking out the top to give 1/4 wavelength (at 2M) spacing between the satellite antenna's and the 6M beam. The satellite antenna's are close to 20' long and mount from close to the center so I need at least 10' (+1/4 wavelength) above the top of the 6M beam. I'm not an engineering type so I thought I would ask on here. What thickness and material would the mast need to be to support this. I am thinking T6061 aluminum, .25" thick wall, 2" outside diameter mast. I live in a 75mph wind zone. Any help would be much appreciated. Thanks, 73's RoD KD0XX

1 0

ande qsl
by Mr Jeffrey L Ross 26 Nov '07

26 Nov '07

Hi all, I finnally got ande,s telem. Had it for a few days now but had trouble sending it here, everything is fine now. srry. Getting good practice for the de-orbit contest. 73 kc8gkf 06:58 ANDE-1>BEACON>UI,?,F0 (1200 baud): T#002,003,009,009,004,003,01000000,000 06:59 N8FQ/ANDE-1*>T2UY6W>UI,?,F0 (1199 baud): `r_Il .y/Joe nr Grand Haven, MI at kb 06:59 VE3TZS/ANDE-1*>APRS>UI,R,F0 (1199 baud): =4429.40N/08003.33WM ve3tzs(a)mac.com 06:59 N8FQ/ANDE-1*>T2UY6W>UI,?,F0 (1199 baud): `r_Il .y/Joe nr Grand Haven, MI at kb 07:00 ANDE-1>BEACON>UI,?,F0 (1199 baud): T#001,108,176,116,001,219,00100010,000 09:02 ANDE-1>BEACON>UI,?,F0 (1200 baud): T#004,110,107,102,104,101,10000000,000 09:02 K4GR-1/ANDE-1*>APRS>UI,?,F0 (1199 baud): :KI4QQM :Hello Rick de k4gr via International Space Station 09:02 N0AN-6/ANDE-1*>APRS>UI,?,F0 (1199 baud): =4205.00N/09400.00WS73' Via Sat {UISS50} 09:03 K4GR-1/ANDE-1*>APRS>UI,?,F0 (1199 baud): =3238.27N/08609.07W`Hello and Greetings de K4GR 73' Via ISS {UISS50} 02:17 W8IC/@NDE-1*>CQ>UI,R,F0 (1199 baud): !4231.21N/08303.47W-A\RU= 02:17 K5VAS-1/ANDE-1*>S2SR2Q>UI,R,F0 (1200 baud): 'y<Vl .;/> 06:36 ANDE-1/SGATE>APRS1>UI,?,F0 (1199 baud): :BLN1ANDE :ANDE-1 only wakes up 1 of evry 15s for users. Pse conserve. using a ht /soundcard interface with mixw and outdoor dipole antenna. recv.only at this time

1 0

Fwd: Re: [Mw] Japanese Lunar Orbiter received.
by Edward Cole 26 Nov '07

26 Nov '07

For those speculating on what it will take to receive a signal from the Moon, check this message received on the "microwave reflector": >X-Original-To: microwave(a)echo.valinet.com >Delivered-To: microwave(a)echo.valinet.com >X-Originating-IP: [24.18.44.7] >From: "Loren Moline WA7SKT" <lmoline(a)hotmail.com> > >Rex, > >As per Paul Marsh the frequency for the Chinese orbiter doppler >beacon is 2234.533 +/- doppler. > >Loren > > > Date: Thu, 22 Nov 2007 03:05:20 -0800 > > From: rexa(a)sonic.net > > To: microwave(a)echo.valinet.com > > Subject: Re: [Mw] Japanese Lunar Orbiter received. > > > > Loren Moline WA7SKT wrote: > > > Hello Friends, > > > > > > For those interested I again tonight received a signal from the > newly launched Japanese Lunar Orbiter. > > > > > > This was received with my newly built S-Band downconverter and > a 3 1/2 turn helix antenna. > > > > > > Frequency drifted due to doppler from 2263.605Mhz to > 2263.581MHz before it went around the other side. I later acquired > it after it came back around. I have not yet established a period of orbit. > > > > > > This was a great way to test my downconverter. > > > > > > Loren WA7SKT > > > > > > > > > > > > Congratulations on the reception. Now you've got me interested. > > > > Info I just looked up says frequencies are 2212, 2219, 2287, 8456. So do > > you think your 2263 was doppler shifted 2287? I wonder if the satellite > > doppler has much effect vs. the moon itself. Calculating the exact > > doppler must be quite a math exercise. > > > > Are you still planning to try the 8 GHz frequency too? Or have you already? > > > > A wiki for the satellite says the period of the main satellite is 2 hrs. > > > > For John, the links say it will be at the moon for about a year. At the > > end they intend to do a soft landing on the moon. > > > > Here are some links I found tonight, (there are lots more.) > > Selene (Kaguya): > > http://en.wikipedia.org/wiki/SELENE > > http://www.selene.jaxa.jp/en/communication/com_faq_e.htm > > http://www.selene.jaxa.jp/index_e.htm > > transmitters & freqs described in this one: > > http://ivs.nict.go.jp/mirror/publications/gm2006/kawano/ > > http://www.aerospaceguide.net/spacecraft/selene.html > > http://www.lpi.usra.edu/meetings/lpsc2006/pdf/1233.pdf > > > > Seems the Chinese also have a satellite, Chang'e, orbiting the moon too. > > http://en.wikipedia.org/wiki/Chang'e_1 > > > > I couldn't find any information about downlink frequencies for the > > Chinese one. Does anyone know anything about that one. Some of the > > information seemed to say it would be playing Chinese music. > > > > _______________________________________________ > > Microwave mailing list > > microwave(a)lists.valinet.com > > http://www.valinet.com/mailman/listinfo/microwave >_______________________________________________ >Microwave mailing list >microwave(a)lists.valinet.com >http://www.valinet.com/mailman/listinfo/microwave 73, Ed - KL7UW ====================================== BP40IQ 50-MHz - 10-GHz www.kl7uw.com 144-EME: FT-847, mgf-1801, 4x-xpol-20, 185w DUBUS Magazine USA Rep dubususa(a)hotmail.com ======================================

4 3

input about best CAT controlled duplex multi-mode satellite rigs
by Dr. Jay Garlitz 26 Nov '07

26 Nov '07

Input about best CAT controlled duplex multi-mode satellite rigs to Mike Baker, WA4HFR, at micanopymike(a)gmail.com would be appreciated: A couple of my local ham friends have finally convinced me to get geared up to work the ham birds. My interests lie more toward the higher frequencies, 2GHz and up, but I do plan to get started on 144 and 432 bands. My question: What are a couple of the very best or most recommended VHF/UHF station rigs for working the birds? Are there any VHF/UHF multi-band mobile rigs suitable for working the ham birds? I presume that suitable rigs must have software controlled doppler correction capability? Thanks-- Mike Baker WA4HFR Micanopy

1 0

rs-15 now eclipse again
by Auke de Jong, VE6PWN 26 Nov '07

26 Nov '07

It seems that by my observations that the beacon transmitter was reliable throughout this latest period of non-eclipse. I noticed that the beacon frequency was always the same(29.3512 usb), and the on/off timings seemed to indicate some state of information by slowly changing the on-duration, and keeping a steady off-duration. Now that the orbit has progressed away from the sun on the ascending node, I think it will be interesting to see if the unit will power-off and on for sunlight and behave in predictable ways or whatnot. There has been some reports from before the non-eclipse period started, where the same beacon signal was heard on a different frequency, but this was before i started listening. If anyone notices interesting behaviour such as different beacon frequencies of messages, or if they have information on how to decide what the beacon information might mean, I would be very interested to hear about it. Thank you Auke de Jong, VE6PWN DO33

1 0