April 2008 - AMSAT-BB - mailman.amsat.org

SEEDS CW/FM Analyzer
by Mineo Wakita 26 Apr '08

26 Apr '08

We are available a new analyzer at Nihon University site. http://cubesat.aero.cst.nihon-u.ac.jp/english/index.html http://cubesat.aero.cst.nihon-u.ac.jp/english/blog.html http://cubesat.aero.cst.nihon-u.ac.jp/download/Downlink_Code_for_Distributi…

1 0

Re: FT817 service manual, repair or parts
by David Donaldson 26 Apr '08

26 Apr '08

I will admit publically I toasted my 817 and took 6 months and $500 to fix. I spent the money in order to prove I could fix it. There are more voltages then the 12 and 5 volt. There is 9V TX, 9V RX and regulators on the both the main board and the PA board (but not the module). To save the list my painful story I will contact you directly with my hints. Others my have simular help. I need to get to a real computer other then this moble phone.... Dave WB7DRU Burnsville ,MN US Sent with Wireless Sync from Verizon Wireless by DAVE DONALDSON-Burnsville MN Amateur radio: WB7DRU Navy Mars: NNN0AXK ---- Original Message ---- From: "Pieter Kotze" <PKotze(a)csir.co.za> Date: 4/25/08 2:32 am To: "amsat-bb(a)amsat.org" <amsat-bb(a)amsat.org> Subj: [amsat-bb] FT817 service manual, repair or parts Hello all Managed to kill my 817 some time ago with a power spike from a dodgy power supply. Found some burnt components and tracks on the main board next to the ribbon cable leading to the front panel and LCD. This prevented the 12V from reaching the front panel. Did a small mod to get the 12V around this burnt track. Still no switch on from the 817. Then found another burnt component, the 5V regulator next to the power switch on the front panel PCB. Temporary replaced the 5v surface mount with a 7805 regulator, but still no joy. Beginning to think that a lot more must have been damaged by the power spike. Anyone out there got more of a service manual to try and track the fault? Otherwise anyone got an 817 that has damage elsewhere from which I could try and swop subparts / PCB to get mine working again? Regards Pieter ZS1PK -- This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard. The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html. This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks Transtec Computers for their support. _______________________________________________ Sent via AMSAT-BB(a)amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb --- Get FREE High Speed Internet from USFamily.Net! -- http://www.usfamily.net/mkt-freepromo.html ---

1 0

FS: Kenwood TS-811
by Jack 26 Apr '08

26 Apr '08

I have for sale a very nice TS-811 I bought new and used for satellite activity. I plan to attend Dayton Hamvention and will bring it along for inspection by anyone interested. Please contact me off list for additional info. hr_gear at charter.net See you at Dayton.

1 0

AMSAT Web Update: Multiple CubeSat Launch April 28
by JoAnne Maenpaa 26 Apr '08

26 Apr '08

Hello everyone, The AMSAT Web page http://www.amsat.org has been updated to provide summary information about the multiple CubeSat launch on April 28. Scroll to the bottom of the page for this information. -- 73 de JoAnne K9JKM k9jkm(a)amsat.org Editor, AMSAT News Service

1 0

CUTE1.7+APDII
by Mineo Wakita 26 Apr '08

26 Apr '08

CW Telemetry Checker Ver 0.5 Beta http://lss.mes.titech.ac.jp/ssp/cute1.7/index_e.html Screen shot http://www.ne.jp/asahi/hamradio/je9pel/80426cut.jpg de JE9PEL, Mineo Wakita

1 0

Re: Using an 817 on AO-51
by John Marranca, Jr 25 Apr '08

25 Apr '08

Likewise, I too, use nothing more than an FT-817ND...but I don't use automation for Doppler Correction. The 817 is quite adept at making QSOs via Satellite. (Next project: Making satellite contacts with a 2AT and a 4AT) John KB2HSH -- _______________________________ John Marranca, Jr PBX Technician/Shop Steward CWA Local 1122 BN Systems, Inc Orchard Park, NY (716)972-2006

1 0

Re: FT817 service manual, repair or parts
by Henk, PA3GUO 25 Apr '08

25 Apr '08

Hi Pieter, I had the same 2 yrs ago ... including smoke from within :-( All the el.cap's in the 12V input line exploded. They are rated only 16V or so, and there is NO protection at all inside the 817 for wrong polarity or too high voltage. As soon as you apply ~16V it's most likely damaged big time (!) At first I hoped only the C's, then the 5V regulator, but it turned out to be the main CPU that was dead. Felt also quite hot. The main CPU is located at the front PCB. You hardly see it. It tried here in the Netherlands at the local Yeasu, for a new front PCB or new front, but they didnt want to help (or offer it at the price of a brand new 817). Then I got help from Yaesu in the UK. Very friendly, and the shipped it I believe for something like 50 dollars. In any case much less as 500..600 for a new 817 ! On trick after that was to de-solder the old CPU and get the new one in. And: I got an old part, so have only 2 colors for the display, and I miss that 3rd bright nice color. Well, anything better as no 817. (wife would NOT allow spending again 600$ due to stupid me applying too much voltage to a new toy :-)) Hope this helps & Hope your CPU is NOT dead. ps1: I now have 2 diodes in the power supply cable to prevent wrong polarity. ps2: I do not complain about the 817, everything comes at a price, more safe/secure DC input design would have resulted in a higher price ! ps3: try a front from another HAM to trace down if you have the same issue. ps4: I also had to remove a C in the HF Amp, also that one caused a short. Henk, PA3GUO http://www.qsl.net/pa3guo ==================================== Hello all Managed to kill my 817 some time ago with a power spike from a dodgy power supply. Found some burnt components and tracks on the main board next to the ribbon cable leading to the front panel and LCD. This prevented the 12V from reaching the front panel. Did a small mod to get the 12V around this burnt track. Still no switch on from the 817. Then found another burnt component, the 5V regulator next to the power switch on the front panel PCB. Temporary replaced the 5v surface mount with a 7805 regulator, but still no joy. Beginning to think that a lot more must have been damaged by the power spike. Anyone out there got more of a service manual to try and track the fault? Otherwise anyone got an 817 that has damage elsewhere from which I could try and swop subparts / PCB to get mine working again? Regards Pieter ZS1PK

1 0

TS-2000X question
by i8cvs 25 Apr '08

25 Apr '08

Hi All, I got advise that the quality of modulation on 23 cm for the TS-2000X in SSB is not so good as in 2 meters and 70 cm. Any experience ? Tanks and 73" de i8CVS Domenico

1 0

Dish position pulse counter
by Phil 25 Apr '08

25 Apr '08

Thank you for reading this. While looking for something to do recently, I came across a project that I was working on four years ago. It's the basis of a PIC controller for a home-built satellite dish rotator. It's taken me the better part of a week to figure out what it's all about and I now remember one of the problems that slowed the pace of the project. I'm wondering if it's worth the effort of continuing. The PIC was counting pulses reasonably well from the elevation jack but was not always accurate because of noise pulses from the motor. I expect the larger azimuth rotator motor will produce even more hash. An accurate pulse count is important so as not to accumulate a large error towards the end of a satellite pass. Constant stopping and starting would probably add extra pulses too. Do home TV dish pointers use shielded cable to take the position pulses back to the controller? It's not something that I can test myself because my satellite gear is in storage more that 1100km from where I live. I'm having second thoughts about the pulse counting scheme and I'm beginning to think that the tried and proven ten-turn pot method might be more fool proof. Has anyone else had any success, or otherwise, with pulse counting? It's an interesting project but it might be impractical. Regards, Phil.

4 3

AMSAT Awards
by Bruce 25 Apr '08

25 Apr '08

We would like to welcome the following to the satellite community. They have made their first satellite contact and are now members of the AMSAT Satellite Communicators Club. University of Florida, Gator Amateur Radio Club, W4DFU The following have earned the AMSAT Sattelite Communications Achievement Award Clyde de Rossett, KI4CKT #462 University of Florida, Gator Amateur Radio Club, W4DFU #463 The following have earned the AMSAT South Africa Satellite Communications Achievement Award Dimitrios Pallis, SW1JGW #US120 University of Florida, Gator Amateur Radio Club, W4DFU #US121 To see all the awards visit http://www.amsat.org or http://www.amsatnet.com Bruce Paige, KK5DO AMSAT Director Contests and Awards ARRL Awards Manager (WAS, 5BWAS, VUCC), VE -- Bruce Paige, KK5DO AMSAT Director Contests and Awards ARRL Awards Manager (WAS, 5BWAS, VUCC), VE Houston AMSAT Net - Wed 0100z on SkyScanner Satellite Radio Network on Galaxy-25 @97° West, Transponder 23 (12115 Vert), Symbol Rate: 22425, APID: 1794 (DVB Free To Air) Also streaming MP3 at http://www.amsatnet.com Podcast at http://www.amsatnet.com/podcast.xml or iTunes Latest satellite news on the ARRL Audio News http://www.arrl.org

1 0

rs-22
by Robert Smith 25 Apr '08

25 Apr '08

Aloha All I have copied RS-22 off and on over the last year. About the same time I read the AMSAT postings re: battery loss etc., I fired up SATPC32 and saw that the bird was almost directly overhead Honolulu (my QTH). I ran outside with my HT and Arrow and received a strong distinct signal. The time was 0833Z (1030p Honolulu time). Accordingly, although the sat. may be experiencing difficulties she was "op normal" under eclipse conditions this evening. My curiousity is now up however and I listen more frequently over the next several days. Aloha from Honolulu. robert NH7WN

1 0

FT817 service manual, repair or parts
by Pieter Kotze 25 Apr '08

25 Apr '08

Hello all Managed to kill my 817 some time ago with a power spike from a dodgy power supply. Found some burnt components and tracks on the main board next to the ribbon cable leading to the front panel and LCD. This prevented the 12V from reaching the front panel. Did a small mod to get the 12V around this burnt track. Still no switch on from the 817. Then found another burnt component, the 5V regulator next to the power switch on the front panel PCB. Temporary replaced the 5v surface mount with a 7805 regulator, but still no joy. Beginning to think that a lot more must have been damaged by the power spike. Anyone out there got more of a service manual to try and track the fault? Otherwise anyone got an 817 that has damage elsewhere from which I could try and swop subparts / PCB to get mine working again? Regards Pieter ZS1PK -- This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard. The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html. This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks Transtec Computers for their support.

1 0

RS-22 not heard
by David 25 Apr '08

25 Apr '08

Hello All, Just had a listen for RS-22 on 435.352 but didn't hear anything. Anyone know of its current status? 73 de David VK5DG

2 1

Re: Dish position pulse counter
by Steve harrison 24 Apr '08

24 Apr '08

Hi Phil, Just a thought regarding pulse counting of the jack (Actuator arm). Feed DC to the reed switch and then detect it with an opto coupler with the appropriate series resistor. Then count the pulses from the output transistor of the opto-coupler. This will stop the false counts from noise etc. I would be very interested in your results with this project as pulse counting has lots of merit as an accurate position sensor. Regards, Steve. VK2XDE

1 0

Any PSLV CubeSat Launch Coverage ?
by Keith N4ZQ 24 Apr '08

24 Apr '08

To anyone in the know, is there going to be any live Internet coverage of the PSLV CubeSat Launch in a few days? Maybe a live web cast or at least an IRC chat room? I would appreciate the URL if there is any. Cal Poly has had great success with it's chat room during their pre launch, launch and post launch activities. Keith N4ZQ _____________________________________________________________ Click here to find answers for Love, Problems, and what your Future holds. http://thirdpartyoffers.netzero.net/TGL2221/fc/Ioyw6i4sufAlIMJRZIPwUryVQQAT…

2 1

Delfi-C3 launch date confirmed!
by Mark L. Hammond 24 Apr '08

24 Apr '08

Just read this: http://www.delfic3.nl/index.php?option=com_content&task=view&id=96&Itemid=71 "Launch date confirmed The launch provider has officially announched a launch date and time: April 28th at 03:53 UTC. All clocks are counting down and preparations for the launch are in progress!" Congratulations to the team! I bet they are excited beyond belief :) 73, Mark L. Hammond [N8MH]

1 0

Thanks for the 817 info
by WB2LLP 24 Apr '08

24 Apr '08

Keith and Ronald, Thanks for the information and pointers to the information. Normally I use an IC-W32A in the driveway or front yard and I wanted to try it with the 817 also. I had forgotten about the example on page 77 of the 817 manual. With all this help, it should be simple. 73 de WB2LLP Gene

1 0

Tickets to Dayton Banquet
by Martha 24 Apr '08

24 Apr '08

This is a reminder that you MUST pay for your banquet ticket before May 12th. Giving me your name only will not hold a ticket. I understand it is difficult since the store is down but you need to call the AMSAT office. The number is 301-589-6062. -- 73- Martha

1 0

O7 23apr08
by Dave Guimont 24 Apr '08

24 Apr '08

O7 beacon on 145.972 +/- doppler, S9 signals in San Diego at 1830z.... Mode B loud and clear the entire pass, ~50 watts ERP.. 73, Dave, WB6LLO dguimon1(a)san.rr.com Disagree: I learn.... Pulling for P3E...

1 0

Re: Using an 817 on AO-51
by Angus 24 Apr '08

24 Apr '08

All my sat QSO's are done with a single FT817 and its no problem with any of the FM sats, very simple to set up, and any one with the FT817 should use the FT Commander software for easy setting of the 817 memorys. regards Gus M0IKB -- I am using the free version of SPAMfighter for private users. It has removed 3464 spam emails to date. Paying users do not have this message in their emails. Get the free SPAMfighter here: http://www.spamfighter.com/len

1 0

UT1FG/mm report
by Robert Turlington 24 Apr '08

24 Apr '08

Hi All yesterday Yuri UT1FG/mm was in KO19 and today in JO85 ,off the coast of Sweden I think, so he must have left St Petersburgh a few days ago heading out of the Baltic then through the English Channel out into the Atlantic and then to South AmericaRegards Robert G8ATE _________________________________________________________________ Be a superhero and win! Play the Iron Man Mashup Game http://www.ironmanmashup.co.uk

1 0

LVB Tracker Assistance
by Joel Kandel 24 Apr '08

24 Apr '08

I'm looking for assistance from anyone who is successfully using the LVB Tracker with the UBS RS-232 simulator drivers, either SatPC32 or Nova tracking software, and preferrably a TS-2000 xcvr. I'm also using a G-5400 rotor. Your help would be much appreciated. Thanks, Joel Kandel, KI4T

1 0

Re: Using an 817 on AO-51
by Pughkeithd＠cs.com 24 Apr '08

24 Apr '08

In a message dated 4/23/2008 9:42:22 PM Central Daylight Time, wb2llp(a)optonline.net writes: > My memory says that someone wrote a very nice article on using an FT-817 > with satellites and used AO-51 as an example. However, I can not remember the > magazine that contained the article and can not find the note that mentioned > it. Hopefully there is someone whose brain has more working cells than > mine, can tell me where the article is located. > > TNX es 73 de WB2LLP > Try the Summer 2007 issue of CQ/VHF. The cover photo shows a set of Field Day Satellite antennas. The article is not about 817's in patricular, but two of them are used as the basis of a complete multimode satellite station. I do use the FT-817 on all of the FM birds as well for demonstrations. It works quite well and, as someone else pointed out, the setup instructions for this are in the back of the FT-817 manual. 73 - Keith, W5IU

1 0

CubeSats Preliminary TLE
by Mineo Wakita 24 Apr '08

24 Apr '08

SEEDS 1 XXXXXU 08XXXXXU 08119.17465972 .00000000 00000-0 00000-0 0 0000X 2 XXXXX 97.9533 178.9040 0004500 6.0427 209.0053 14.7954000000001X Cute-1.7 II 1 XXXXXU 08XXXXXU 08119.17374537 .00000091 00000-0 00000-0 0 0000X 2 99999 97.9419 179.0062 0011471 292.3990 277.6939 14.7828229200001X Preliminary TLE 1 00000U 00000C 08119.17443982 .00000000 00000-0 00000-0 0 0013 2 00012 97.9497 178.9014 0004270 015.5590 198.2466 14.79780033 00004

1 0

UISS-SatGate
by Mineo Wakita 24 Apr '08

24 Apr '08

[How to SatGate using UISS only] I could satgate many data to findu.com: http://www1.findu.com/cgi-bin/pcsat.cgi?absolute=1 Please see my web: http://www.ne.jp/asahi/hamradio/je9pel/uisssate.htm Thank you very much, Dany/LU4EG and Guy/ON6MU. de JE9PEL, Mineo Wakita

1 0

W0DXZ in DM25,DM26
by w0dxz＠aol.com 24 Apr '08

24 Apr '08

I am planning to go to Laughlin NV and then on to LasVegas Thursday through Sunday. If possible, I will be on? AO-27 and AO-51 sometime during that period,? if all works well. Not sure how much activity there is from those two. BoW0DXZ DM33 Sun City AZ

1 0

Six teams vie for satellite prize
by Trevor 24 Apr '08

24 Apr '08

Six teams of students are vying for the chance to build an experiment for a satellite that will launch in 2010, see http://www.southgatearc.org/news/april2008/satellite_prize.htm 73 Trevor M5AKA --------------- Daily Amateur Radio RSS News: http://www.southgatearc.org/ Email your news items to: editor at southgatearc.org News On Your Website: http://www.southgatearc.org/rss/index.htm News On Your PC: http://www.southgatearc.org/rss/newsreader.htm Upload Your News: http://www.southgatearc.org/news/your_news.htm --------------- __________________________________________________________ Sent from Yahoo! Mail. A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html

1 0

Re: A reminder re: phonetic alphabet and digits... (N7JK)
by John Kopala 24 Apr '08

24 Apr '08

Dale and Pat, I'd like to add a few more comments. I know the passes are short, but I've observed a lot of time wasted by multiple stations transmitting at the same time, not letting a station finish their exchange, and the use of excessive power. The handheld stations don't have a chance when big guns blasting away with gobs of power. The other night a K1... station was obliterated and stomped on. How many "1" calls do you hear these days? Please folks, especially on the busy FM birds. A chaos is inevitable, but we can minimize it if we... 1. Run the minimum power necessary to reach the satellite - 5 watts or less if your radio allows. 2. Listen for the weak station operators. 3. Operate full duplex so you can hear the downlink while transmitting. 4. Be patient and let others complete their exchange. If we stomp on each other nobody wins. 5. If you hear multiple stations (usually just a grunge sound) on the downlink, stop transmitting. Nobody makes a contact when everybody transmits at the same time. 6. If you can't hear the downlink, don't keep transmitting. Just because you can't hear the bird doesn't mean that the bird can't hear you and that you are not interfering with others. 7. We all mess up from time to time, so be patient with us. 8. Oh, and did I say, "Use the minimum power necessary....?" And yes, I'm probably preaching to the choir, but I guess we all need to be reminded from time to time. John Kopala - N7JK From: Dale-KL7XJ <daleh(a)alaska.net> Subject: [amsat-bb] Re: A reminder re: phonetic alphabet and digits... To: amsat-bb(a)wd9ewk.net Cc: amsat-bbs <amsat-bb(a)amsat.org> Message-ID: <480E562F.6020501(a)alaska.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed I have been diligently waiting and trying to work the XE stations. It is as exciting for me as I suppose it for them. The other night I had a call from XE2BRL I was not sure on his suffix so I asked him to repeat to be sure and when he came back he was covered up by QRM by other stations trying to get him that I never was able to complete the QSO or grid squares. I know the passes are short but for fringe area to fringe are on the foot print I sure wish folks would give some consideration. I try to keep my transmissions short and consider other folks needs over mine. I will keep trying though. I do have confirmation from Japan on the other hand... That was pretty cool. 73, Dale - KL7XJ BP40

1 0

AO7 now in mode B only?
by dobarrows＠aol.com 24 Apr '08

24 Apr '08

Frank, K9CIS, just told me AO7 is starting to go in eclipse again and is stuck in mode B. He also reported that the beacon was back. --- Dave W8IJ

2 1

Using an 817 on AO-51
by WB2LLP 23 Apr '08

23 Apr '08

My memory says that someone wrote a very nice article on using an FT-817 with satellites and used AO-51 as an example. However, I can not remember the magazine that contained the article and can not find the note that mentioned it. Hopefully there is someone whose brain has more working cells than mine, can tell me where the article is located. TNX es 73 de WB2LLP

3 2

N5AFV Special Event Operation from the Alamo
by Allen F. Mattis 23 Apr '08

23 Apr '08

I had a wonderful time Tuesday and Wednesday (April 22 & 23) operating two passes of AO-51 and one pass of SO-50 from the Alamo in San Antonio, Texas. I was using my W32A HT and an AL800 telescoping antenna. For one pass I was only 50 feet from the front door of the Alamo, and for other passes I stayed across the street approximately 150 feet from the front door due to the presence of Department of Public Safety (DPS) officers that looked like they might arrest me. Both of these locations were within the walls of the fortified Alamo at the battle. Stations worked were W7JPI, W5VG, W4KI, XE2RV, KI5FIA, XE2BHL, WB2VUN, WA8SME, W6ASL, K6YK, WA6DIR, W6ZQ, and XE2HWB and I have a special QSL card made up for the operation. This was my third satellite operation from EL09sk, the Alamo, and on future trips to San Antonio I hope to operate again from the Alamo. 73 Allen N5AFV

1 0

N5AFV Special Event Operation from the Alamo
by Allen F. Mattis 23 Apr '08

23 Apr '08

I had a wonderful time Tuesday and Wednesday (April 22 & 23) operating two passes of AO-51 and one pass of SO-50 from the Alamo in San Antonio, Texas. I was using my W32A HT and an AL800 telescoping antenna. For one pass I was only 50 feet from the front door of the Alamo, and for other passes I stayed across the street approximately 150 feet from the front door due to the presence of Department of Public Safety (DPS) officers that looked like they might arrest me. Both of these locations were within the walls of the fortified Alamo at the battle. Stations worked were W7JPI, W5VG, W4KI, XE2RV, KI5FIA, XE2BHL, WB2VUN, WA8SME, W6ASL, K6YK, WA6DIR, W6ZQ, and XE2HWB and I have a special QSL card made up for the operation. This was my third satellite operation from EL09sk, the Alamo, and on future trips to San Antonio I hope to operate again from the Alamo. 73 Allen N5AFV

1 0

GloboSat 01 confirmed date and time
by CX2SA Ham Radio Services 23 Apr '08

23 Apr '08

Hello and thank you for read my message. Confirmed date and time for CV1LAI - GloboSat 01. Globosat 01 is the first uruguayan telemetry test from high altitude balloon of the LAI Project. * Date April 24 of 2008 (10:00 UTC) * Telemetry The platform send telemetry information in standard APRS format in 2m. band. The APRS message goes encapsulated in a AX.25 (Packet) frames and modulated in AFSK (1200 bps) FM. * Data: Callsign: CV1LAI (special callsign for the Globosat during these days) Mode: APRS (over AX.25 1200bps) Frequency: 145.030 MHz Power: 1W. Antenna: dipole 1/2 wavelenght in vertical position. * Web site of the Lai Project: <http://iie.fing.edu.uy/twiki/bin/view.cgi/Satelite/GloboSat01Instructivo> <http://iie.fing.edu.uy/twiki/bin/view.cgi/Satelite/GloboRadiacion01> * E-mail: CX0CFI(at)fing.edu.uy Best 73, Jose CX2SA

1 0

Fun Ham Video ...
by JoAnne Maenpaa 23 Apr '08

23 Apr '08

Ya'll just might like this ... Good fun ... http://www.youtube.com/watch?v=1MgOyWW5uG8 -- 73 de JoAnne K9JKM k9jkm(a)amsat.org

1 0

Subject Change: R-20 Help
by Keith N4ZQ 23 Apr '08

23 Apr '08

Would someone help Dave out with his R-20 problem. Not being a R-20 owner I couldn't offer much assistance. Thanks, if you can lend a hand.. Keith N4ZQ -- "D. Mynatt" <dave(a)mynatt.biz> wrote: Keith, I hope I'm not bothering you, but I need some help again. I tuned my R-20 to 436.8375 MHz and the "5" wouldn't take. When I look at my User Manual, all frequencies are 3.3 . How in the world am I supposed to get to 3.4 freq? Is this 435.8375 freq normal? Dave ===== ----- Original Message ----- From: "Keith N4ZQ" <n4zq(a)netzero.net> To: <amsat-bb(a)amsat.org> Sent: Tuesday, April 22, 2008 5:34 PM Subject: [amsat-bb] Any PSLV CubeSat Launch Coverage ? > To anyone in the know, is there going to be any live Internet coverage of > the PSLV CubeSat Launch in a few days? Maybe a live web cast or at least > an IRC chat room? I would appreciate the URL if there is any. Cal Poly has > had great success with it's chat room during their pre launch, launch and > post launch activities. > > Keith N4ZQ > > > > > > > > > > > _____________________________________________________________ > Click here to find answers for Love, Problems, and what your Future holds. > http://thirdpartyoffers.netzero.net/TGL2221/fc/Ioyw6i4sufAlIMJRZIPwUryVQQAT… > > > > _______________________________________________ > Sent via AMSAT-BB(a)amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > _____________________________________________________________ Stop foreclosure. Click here to stay in your home and rebuild credit. http://thirdpartyoffers.netzero.net/TGL2221/fc/Ioyw6i4tZwGiBhBlLSi2nzW4kfH4…

2 1

Re: Delfi-C3 telemetry decoding software test
by Luc Leblanc 23 Apr '08

23 Apr '08

On 21 Apr 2008 at 18:27, Wattage Perera wrote: > Hi to the BB, > > I was able to locally test the Delfi-C3 RASCAL software using the 5MB > telemetry sound file from the Delfi-C3 website using my computer with the > following method. > > Set your computer Sound Recording Device Properties using the following > path. I am using Windows XP Home Edition. > > Control Panel ---- Sounds and Audio Devices ---- Sounds and Audio Devices > Properties ---- Click on Audio tab ---- Click on Sound Recording Volume > tab ---- Select Mono Mix on Sound Recorder Properties ---- Set the > recording volume level to half way on the scale. Now make sure you have a > check mark in the Sound Recorder select box. ... > > Kumara Perera VE4WKP > > _______________________________________________ I just succeed testing the DELFI C3 decoding program using WIN XP. You should start the recorder playback first and RASCALS after (the reverse way will not work) It seems the decoding data has been uploaded to the DELFI server in real time? I got some out of sync flags but i fear the results under heavy doppler/QSB conditions... Will see! A very nice program overall and i hope all will be going as planned. It will be a cube's launch orgy and i read somewhere they are going in space for 75000$ including launch cost but battery not included... A slightly bigger cube with a booster motor is something feasible? a reborn AO-7? in the long desert walk running for the HEO mirage even the smallest drop of hope worth as much than a drop of gas. It will be great if the launch can be broadcasted over the internet. Thank's Kumara Luc Leblanc VE2DWE Skype VE2DWE www.qsl.net/ve2dwe WAC BASIC CW PHONE SATELLITE "-"

1 0

Delfi-C3 - accounts for uploading telemetry
by Wouter Jan Ubbels 23 Apr '08

23 Apr '08

Hi all, the RASCAL telemetry decoding software for Delfi-C3 includes the possibility to upload telemetry to our servers. Although this can be done using the default "guest" account, we would like to encourage everyone to obtain an account by sending an e-mail with your name, callsign and gridsquare locator to rascal(a)delfic3.nl , so that we can actually see from which parts of the world we get telemetry. Furthermore, we will hold a small competition where the radio amateur who has submitted most packets after the three months science mission receives a prize. (Prize details to be announced) On our mission operations page at http://www.delfic3.nl/index.php?option=com_content&task=view&id=93&Itemid=1… we have added a link to a google map page showing all hams currently participating. 73 on behalf of the Delfi-C3 team Wouter Jan Ubbels PE4WJ

1 0

I: IW6IBE
by Francesco Grappi 23 Apr '08

23 Apr '08

Hi Chris, I think the correct call it should be I6IBE And the name IVO in Pratola Peligna city In south of Italy 73" Frank IW4DVZ -----Messaggio originale----- Da: amsat-bb-bounces(a)amsat.org [mailto:[email protected]] Per conto di Chris Bloy Inviato: martedì 22 aprile 2008 15.24 A: amsat-bb(a)amsat.org Oggetto: [amsat-bb] IW6IBE Hi All, Does anyone have any details for the above station? I work him today on AO-27, but found that my recording cable fell out and only recorded wind!! Ivor is he name from memory and his callsign is IW6IBE.. I have searched the web and found nothing! Any location information would be great.. Thanks, Chris - M0DQO/P _______________________________________________ Sent via AMSAT-BB(a)amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

2 1

A reminder re: phonetic alphabet and digits...
by Patrick STODDARD (WD9EWK/VA7EWK) 22 Apr '08

22 Apr '08

Hi! I just heard from Beny XE2YBG, who made a quick trip north of his city in Tamaulipas state in northeastern Mexico to be in a different grid (EL04) last night for an AO-51 pass. Beny told me he worked 9 different stations, mostly XE stations, during a pass at 0136 UTC (about 87 degrees maximum elevation for his location). He was hoping to work more stations in the US, but many of the stations calling him were not using the international phonetic alphabet and were not using individual digits for their grids. He does not understand much English, but can deal with the standard (international) phonetic alphabet and the individual digits OK. For example, if I called Beny in English and wanted to give him my information, I would use the following (if operating in grid DM33)... "Whiskey-Delta-Nine-Echo-Whiskey-Kilo, Delta-Mike-Three-Three" Say each letter phonetically, and each digit in the grid locator - not "Delta-Mike-Thirty-Three". Many of the Mexican satellite operators understand "QSO English", and not much more. They would enjoy making more contacts with stations throughout the USA and Canada, but their limited grasp of the English language means we (at least those of us outside Mexico who do not speak Spanish) need to remember that when calling those stations. Please be aware of this, and you may end up working some new and unusual grids via satellite from those XE stations (some of whom are starting to look at their maps, and make trips to other grids). There are some of the XE satellite operators who are fluent in English. Even with them, following these suggestions (phonetic alphabet, individual digits in grid locators) would be a good thing, and a good habit to get into - for the times you work an XE station with limited fluency in English. Thanks and 73! Patrick WD9EWK/VA7EWK http://www.wd9ewk.net/

2 2

EW/G0SFJ report
by andy thomas 22 Apr '08

22 Apr '08

EW/G0SFJ successfully contacted G7HIA on 20th April via AO-51, but under difficult conditions. With licence number 000065, and thanks to two local hams, and to the great interest of the local Militsia, on the evening of 19 April I made contact simplex on 145.500 with other local hams in Minsk from outside my hotel. The next day Sunday 20th, we were QRV on the early pass of AO-51 at about 0650 UTC but FM'd out by QRO hams in Moscow and Ukraine (in Russian) and in YO8 (calling in English). We used a separate 5w TX and RX but did not hear ourselves coming back. By 0920 utc we were in Krutki north-east of Minsk, to see the monument to Belarussian cosmonaut Vladimir Kovalenok. Using a THD-7E powered from the car battery I think I switched on SO-50, then heard 5/9 a (G6 or G7)and Ib, OZ1MY, but could not establish contact because I was still on duplex and feedback howl through the satellite blanked me out! But at 1630 approx utc, after a DL and OE had a long conversation in German, and a UA9 in Siberia passed by, I did manage to contact John G7HIA, 5W with my trusty Arrow antenna, from Minsk, KO33su - so he gets the card!! Any SWL cards or reports gratefully received by email or QTHR, and will be acknowledged!! My thanks to Alex Pantchenko, President of BFRR, and the Minsk hams, whom I have decided not to name - they know who they are, and I shall write to them privately. 73 de andy, G0SFJ __________________________________________________________ Sent from Yahoo! Mail. A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html

1 0

Re: Ridge Test Results
by Laurence 'Mike' Hammer 22 Apr '08

22 Apr '08

Hi Nathaniel, Been watching this thread. The only bits of info I haven't seen go across yet -- Antennas act very differently when the radiator part of the antenna is in close proximity to the RF ground. If you have modelled the antenna as being "in empty space", that will account for much of the loss seen when it is mounted to the sat, which in your design by definition is very close to the sat frame, and thus both the electrical and RF grounds. Have your modeller check to see if they have the sat frame, and any conductive panels, in their model; if not you'll have some (possibly large) matching adjustments to do. A 1/4 wave piece of steel measuring tape needs to be at 90 degrees from all nearby metal to be an actual "monopole" antenna. If you lay it along the side of the sat, the nearby metal (grounds) will soak up much of the signal. If I remember right, Prof Campbell's prior-to-CubeSat project (name is escaping me at the moment) incorporated a proven loop design. I don't remember the freq though. You might want to check your spec against that one. If you haven't already, check the entire assembly (antenna on sat) with an SWR analyzer, or preferably a network analyzer, to make sure the transmitter is "seeing" a 50 ohm RF load at the input of the antenna line at your transmit freq. While this doesn't guarantee the antenna is actually an antenna and not a resistor, it does give a basic check that the matching network is close for your situation. GL, Mike N2VR

2 1

IW6IBE
by Chris Bloy 22 Apr '08

22 Apr '08

Hi All, Does anyone have any details for the above station? I work him today on AO-27, but found that my recording cable fell out and only recorded wind!! Ivor is he name from memory and his callsign is IW6IBE.. I have searched the web and found nothing! Any location information would be great.. Thanks, Chris - M0DQO/P

1 0

Re: FINAL MONTHLY OSCAR-11 REPORT
by kb2m＠comcast.net 22 Apr '08

22 Apr '08

It was a pleasure to work with you on UO-11 Clive. I still listen for her at least a couple of times a week, last time was yesterday. And, I will continue to do so in the future. 73 Jeff kb2m -------------- Original message -------------- From: Clive Wallis <clivew(a)zetnet.co.uk> > > FINAL MONTHLY OSCAR-11 REPORT > > 21 April 2008 > > RECEPTION REPORTS REQUESTED! > > In the years ahead, it is possible that you may hear OSCAR-11, by accident, > when tuning round the frequency. If you are able to record the satellite on > audio tape or as a WAV file (not MP3), please do so, as it is unlikely > that it will be heard on the next pass! > > Please send reception reports to xxxxx(a)amsat.org (replace xxxxx by > g3cwv) or post to amsat-bb. If you have a file, please let me know what > you have, before sending it! > > If you need to hear what the satellite sounds like, please visit my website > www.users.zetnet.co.uk/clivew/ The satellite transmits on 145.826 MHz. set > receiver to NBFM. > > ---------------------------- > > This is the 144th monthly report for OSCAR-11. Unless there is an > unexpected change of status (such as occured with OSCAR-7), I'm expecting > this to be my last report. > > This report covers the period from 17 March to 21 April 2008. During > this period the satellite has not been heard and no reports of reception > have been received. > > Transmissions were expected to resume on 24 March, after the beacon > switched-off on 14 March. However, permanent eclipses started a few days > beforehand, which probably caused the transmission period to be terminated > prematurely. It is now unlikely that the satellite will support any > sustained period of operation, and will only transmit for a short time, > possibly less than a single orbit, every 21 days. > > I am indebted to all those who sent reception reports during the last 12 > years. Initially there was much interest in hearing the mode-S beacon, > which was very weak. Recently, interest has changed to hearing when the > two metre beacon switched on/off. Special thanks must go to Jeff KB2M who > recorded telemetry during my holidays, and Peter ZL3TC, who has monitored > the beacon daily, during recent months. Many thanks to everyone.

1 0

FINAL MONTHLY OSCAR-11 REPORT
by Clive Wallis 22 Apr '08

22 Apr '08

FINAL MONTHLY OSCAR-11 REPORT 21 April 2008 RECEPTION REPORTS REQUESTED! In the years ahead, it is possible that you may hear OSCAR-11, by accident, when tuning round the frequency. If you are able to record the satellite on audio tape or as a WAV file (not MP3), please do so, as it is unlikely that it will be heard on the next pass! Please send reception reports to xxxxx(a)amsat.org (replace xxxxx by g3cwv) or post to amsat-bb. If you have a file, please let me know what you have, before sending it! If you need to hear what the satellite sounds like, please visit my website www.users.zetnet.co.uk/clivew/ The satellite transmits on 145.826 MHz. set receiver to NBFM. ---------------------------- This is the 144th monthly report for OSCAR-11. Unless there is an unexpected change of status (such as occured with OSCAR-7), I'm expecting this to be my last report. This report covers the period from 17 March to 21 April 2008. During this period the satellite has not been heard and no reports of reception have been received. Transmissions were expected to resume on 24 March, after the beacon switched-off on 14 March. However, permanent eclipses started a few days beforehand, which probably caused the transmission period to be terminated prematurely. It is now unlikely that the satellite will support any sustained period of operation, and will only transmit for a short time, possibly less than a single orbit, every 21 days. I am indebted to all those who sent reception reports during the last 12 years. Initially there was much interest in hearing the mode-S beacon, which was very weak. Recently, interest has changed to hearing when the two metre beacon switched on/off. Special thanks must go to Jeff KB2M who recorded telemetry during my holidays, and Peter ZL3TC, who has monitored the beacon daily, during recent months. Many thanks to everyone. The Beacon frequencies are - VHF 145.826 MHz. AFSK FM ASCII Telemetry UHF 435.025 MHz. OFF S-band 2401.5 MHz. OFF The satellite is now subject to eclipses during every orbit. Long term predictions indicate that eclipses will occur until 2019, when there will be some eclipse free periods until 2023. However these very long term predictions should be regarded with caution, as large tracking errors can accumulate over long periods of time. When telemetry was last received it showed that one of the solar arrays had failed, and there was a large unexplained current drain on the main 14 volt bus. After 24 years in orbit the battery has undergone over 100,000 partial charge/discharge cycles, and observations suggest that it cannot power the satellite during eclipses lasting more than about ten minutes, or sometimes even during periods of poor solar attitude. The current status of the satellite, is that all the analogue telemetry channels, 0 to 59 are zero, ie they have failed. The status channels 60 to 67 are still working. The real time clock is showing a large accumulated error, although over short periods timekeeping is accurate to a few seconds per month. When last heard the clock was 83.0958 days slow. The day of the month has a bit stuck at 'one' so the day of the month may show an error of +40 days for some dates. The time display has switched into 12 hour mode. Unfortunately, there is no AM/PM indicator, since the time display format was designed for 24 hour mode. The spacecraft computer and active attitude control system have switched OFF, ie. the satellite' attitude is controlled only by the passive gravity boom gradient, and the satellite is free to spin at any speed. The watchdog timer now operates on a 20 day cycle. The ON/OFF times have tended to be very consistent. The average of many observations show this to be 20.7 days, ie. 10.3 days ON followed by 10.4 days OFF. However, poor solar attitude may result may result in a low 14 volt line supply, which may cause the beacon to switch OFF prematurely, and reset the watchdog timer cycle. When this occurs, the beacon is OFF for 20.7 days. OSCAR-11 was the second satellite from the University of Surrey, www.ee.surrey.ac.uk/SSC. It was designed, built and launched, within a time scale of six months, by a team headed by Martin Sweeting G3YJO. Amateur radio groups working at various locations in the world, also contributed to the project. It used commercially available 'off the shelf' components (COTS). Following the success of these satellites, in 1985 Surrey Satellite Technology Ltd. www.sstl.co.uk was formed, as a commercial venture. This grew into a major company which has produced over 27 small satellite projects for a global market. The University of Surrey has recently agreed to sell it's major shareholding to EADS-Astrium. This agreement is now awaiting regulatory approval. The joint company will have the experience of manufacturing large and small satellites, for geo-synchronous and low earth orbits. In regognition of his work, Martin G3YJO, was appointed Professor at the University of Surrey. He received an OBE in the 1995 Queens birthday honours list, and in 2002 a knighthood in the New Year's honours list. Listeners to OSCAR-11 may be interested in visiting my website, which is being updated to reflect the current status of the satellite. If you need to know what OSCAR-11 should sound like, there is a short audio clip for you to hear. The last telemetry received from the satellite is available for download. The website contains an archive of news & telemetry data which has now been updated. It also contains details about using a soundcard or hardware demodulators for data capture. There is software for capturing data, and decoding ASCII telemetry. The URL is www.users.zetnet.co.uk/clivew/ If you place this bulletin on a terrestrial packet network, please use the bulletin identifier $BID:U2RPT144.CWV, to prevent duplication. 73 Clive G3CWV xxxxx(a)amsat.org (please replace xxxxx by g3cwv)

1 0

Re: Ridge Test Results
by Nathaniel S. Parsons 22 Apr '08

22 Apr '08

I'm sorry we didn't get in touch, but my cell phone died while we were out there. Were were listening on 146.610, but didn't hear anything except the time. Maybe we weren't using it correctly? If you could get all of that material tomorrow, that would be excellent. We do have access to sanding paper, a file, and a grinding wheel, though. On Mon, Apr 21, 2008 at 11:26 PM, F. Kevin Feeney <fkf1(a)cornell.edu> wrote: > Were you transmitting in just one direction or from TS to D7 and then from > D7 to TS? > Via packet, only TS to D7 (some were sent the other way, but we were told having attenuators on the RX side would give us unreliable data). By voice, both directions, and while that signal was fuzzy at higher attenuation, it never completely cut out. For the packets, we always received them on the radio, but the number recorded was the amount passed on to the computer. > Why list the power settings in each radio if you are only transmitting > from the TS2000 to the D7? That confused me. Just for completeness. > > How successful have you been at running the radios in 9600 baud mode in > previous testing? If you don't have many weeks of positive results in that > mode at this point with whatever antennas, I'd be very wary of committing to > a launch. Not very. We could complete the mission at 1200 baud, though, it would just take longer to move data back and forth. > so what are the power listings for each radio telling us? To me I think > I'm seeing that your circularly polarized antenna isn't quite as good in > horizontal mode as in vertical? You have to have less attenuation in place > to get two good packets per two tries for the same power settings in > horizontal as for vertical. looks like about a 15 db difference? (30 vs 45?) > That says your circular antenna "circularity" is suspect. Is it a helix? > Crossed yagis with phasing harness? Is it up in the air off the support > structure? Are the feedlines trailed out the back of the antenna, or do they > come down through the elements to the mast? I'm sorry that I wasn't clear, but all our rotations were in the direction of the other station. So, if an observer were looking at us from the side, Vertical: "satellite" | XXXXX- Ground Horizontal: "satellite" -- XXXXX-Ground 45 deg: "satellite" / XXXXX-Ground So we didn't really test the circularity of the ground antenna, but the gain pattern of the rubber duck. > Wait - were you testing the loop during any of this? I thought all of the > measurements were made with the rubber duck only in three orientations, > vertical, horizonatal and 45 degree. Where is the loop data shown? The loop data is the 10 dB figure mentioned in my first email. Under these same conditions on Friday, the loop only worked up to 10dB. Also, I can use a network analyzer tomorrow at 2PM. Is it worth analyzing the square loop antenna at this point? -Nate

2 1

Fw: Re: Ridge Test Results
by Roger Kolakowski 22 Apr '08

22 Apr '08

----- Original Message ----- From: DBowman To: G0MRF(a)aol.com Cc: rogerKola(a)aol.com Sent: Tuesday, April 22, 2008 7:22 AM Subject: RE: [amsat-bb] Re: Ridge Test Results Thanks for the copy Nate. No need to reply to what follows, but it may be useful. I'll look out for the next update. Congratulations, That's really good progress for just a couple of days. I think 45dB will take you just to about 600km, but really there's room for improvement yet. The photo's show the antenna very well. A couple of thoughts. It looks like it is mounted on FR4 PCB and this is an inch or so from the main structure. Is there another antenna on the other side? - The RF will not pass through the satellite. The FR4 will affect the properties especially if you have applied glue at a voltage node on the antenna. Also, I see one side is very closely coupled into a track running from the solar cells. That will not help. My guess is that the antenna will be really bad on the VNA. - Remember when testing that the VNA will show you return loss. You will know if the return loss is between 0dB and 6dB that the antenna does not work. But please be aware that even if you see a 'good' return loss e.g. 15 to 30dB, Then that may not indicate that the energy from your transmitter is being radiated. - After all, a 50 Ohm resistor has a wonderful return loss, but does not radiate. Look for a nice dip at your design frequency. If you have to replace the antenna then a whip / steel tape would be OK but needs to work against part of the structure. - Which looking at your satellite will be difficult to do. A good solution may be to make a dipole from two solid metal rods and fit them to the same spot where your antenna is at present. - But clear of other objects. Say 1 inch above the surface. Another choice would be a folded dipole, but you will need to match that from apx 200 to 300 ohms, back down to 50 ohms. If you decide on the simple (but reliable) dipole, mount the elements off the PCB material and only support them at the center not at the ends. The ends are a high voltage point and anything near them or touching will affect the performance. I think your original estimate of 57dB is spot on. Well done. Path loss for 3.18km = -95.26dB Path loss for 2000km = -151.23 Difference from ridge to space = 56dB So you have to find another 12dB + some margin for loss due to spin or pointing angle. 1) It could be that the rubber duck is only 50% efficient. - So that could be 3dB off the total. But your new antenna may no be much better. 2) You have not mentioned ground station feeder loss. Without the preamp that will be added to the total. On 70cms you could be looking at 4 - 6dB. So, possibly only 6 or 7dB to find !!! Your TS2000 has an S meter. On SSB or CW the sensitivity is as follows. This is very approximate, but it may help. This is with RF gain at max and no pre-amp. S1 = - 113dBm at antenna. S3 - 110dBm S5 - 107 S7 - 102 S9 - 93dBm >From what you have said so far 0.5W of carrier from the ridge should give a little over S9 when in SSB or CW. If you can check this with a lab sig generator and your TS2000 you will be able to do some really good measurements on your system. I have one final thought on the missing dBs. Or the lack of 9600. You mention that you have not been able to use 9600 and you are still not 100% reliable on 1200. It could be that you need to optimize the modulation level on the transmitter. That is very important because if the modulation is too high. - i.e. if the volume going into the radio is too high, then the bandwidth on FM will be much greater then necessary. The reason this is important, is that if the transmitted bandwidth of the signal exceeds the width of the filters in the receiver, then the demodulated audio will be distorted and you will never recover the data. (I think something like this happened to CAPE 1) So, spend a little time optimizing the transmitter either by experimentation, or by calculating the bandwidth and then attaching the transmitter to a spectrum analyzer to make the adjustment. - There probably isn't time, but the proper way would be to generate a test signal at 9600 and then examine the recovered audio for distortion / linearity. Give the TS2000 a try with OSCAR 51 on 435.300 (starting 10kHz high for Doppler and finishing 10k low) April 1 - April 30 FM Repeater, V/U Uplink: 145.920 MHz FM, NO PL Tone Downlink: 435.300 MHz FM 9k6 Digital L/U BBS and Telemetry Uplink: 1268.700 MHz FM Downlink: 435.150 MHz FM Good Luck David -------------------------------------------------------------------------------- From: G0MRF(a)aol.com [mailto:[email protected]] Sent: 22 April 2008 08:44 To: DBowman Subject: Fwd: [amsat-bb] Re: Ridge Test Results In a message dated 22/04/2008 05:39:41 GMT Standard Time, nsp25(a)cornell.edu writes: I'm sorry we didn't get in touch, but my cell phone died while we were out there. Were were listening on 146.610, but didn't hear anything except the time. Maybe we weren't using it correctly? If you could get all of that material tomorrow, that would be excellent. We do have access to sanding paper, a file, and a grinding wheel, though. On Mon, Apr 21, 2008 at 11:26 PM, F. Kevin Feeney <fkf1(a)cornell.edu> wrote: > Were you transmitting in just one direction or from TS to D7 and then from > D7 to TS? > Via packet, only TS to D7 (some were sent the other way, but we were told having attenuators on the RX side would give us unreliable data). By voice, both directions, and while that signal was fuzzy at higher attenuation, it never completely cut out. For the packets, we always received them on the radio, but the number recorded was the amount passed on to the computer. > Why list the power settings in each radio if you are only transmitting > from the TS2000 to the D7? That confused me. Just for completeness. > > How successful have you been at running the radios in 9600 baud mode in > previous testing? If you don't have many weeks of positive results in that > mode at this point with whatever antennas, I'd be very wary of committing to > a launch. Not very. We could complete the mission at 1200 baud, though, it would just take longer to move data back and forth. > so what are the power listings for each radio telling us? To me I think > I'm seeing that your circularly polarized antenna isn't quite as good in > horizontal mode as in vertical? You have to have less attenuation in place > to get two good packets per two tries for the same power settings in > horizontal as for vertical. looks like about a 15 db difference? (30 vs 45?) > That says your circular antenna "circularity" is suspect. Is it a helix? > Crossed yagis with phasing harness? Is it up in the air off the support > structure? Are the feedlines trailed out the back of the antenna, or do they > come down through the elements to the mast? I'm sorry that I wasn't clear, but all our rotations were in the direction of the other station. So, if an observer were looking at us from the side, Vertical: "satellite" | XXXXX- Ground Horizontal: "satellite" -- XXXXX-Ground 45 deg: "satellite" / XXXXX-Ground So we didn't really test the circularity of the ground antenna, but the gain pattern of the rubber duck. > Wait - were you testing the loop during any of this? I thought all of the > measurements were made with the rubber duck only in three orientations, > vertical, horizonatal and 45 degree. Where is the loop data shown? The loop data is the 10 dB figure mentioned in my first email. Under these same conditions on Friday, the loop only worked up to 10dB. Also, I can use a network analyzer tomorrow at 2PM. Is it worth analyzing the square loop antenna at this point? -Nate

1 0

CubeSats launch information
by Mineo Wakita 22 Apr '08

22 Apr '08

Launch 28Apr08 03:53UTC Launch Vehicle: PSLV-C9 Preliminary TLE 1 00000U 00000C 08119.17443982 .00000000 00000-0 00000-0 0 0013 2 00012 97.9497 178.9014 0004270 015.5590 198.2466 14.79780033 00004 --------------------------------------------------------------------- Satellite Uplink Downlink Beacon Mode Callsign CUTE1.7 1267.600 . . 9600bd GMSK JQ1YTC CUTE1.7 . 437.475 . 9600bd GMSK JQ1YTC CUTE1.7 . 437.475 . 1200bd AFSK JQ1YTC CUTE1.7 . . 437.275 CW SEEDS . 437.485 . FM,CW,Talk JQ1YGU DELFI-C3 . 145.870 . 1200bd BPSK DLFIC3 DELFI-C3 435.570-530 145.880-920 145.930 FM,CW COMPASS-1 . 437.405 . 1200bd AFSK COMPASS-1 . . 437.275 CW AAUSAT-II . 437.425 437.425 1200bd AFSK OZ2CUB AAUSAT-II . 437.425 437.425 9600bd FSK OZ2CUB CANX-2 . 437.478 . 32Kbd- VA3SFL CANX-2 . 2407.650 . 256Kbd GMSK VA3SFL --------------------------------------------------------------------- http://showcase.netins.net/web/wallio/CubeSat.htm http://www.dk3wn.info/calendar/satellit.php?language=german

1 0

AMSAT Goes to the Races -- April 27
by Tom Clark, K3IO 22 Apr '08

22 Apr '08

This coming Sunday, April 27th, AMSAT will have its premiere at a major sports car race -- The Bosch Engineering 250 at the Virginia International Raceway (VIR) Grand-Am Rolex Sports Car Series; VIR is located near Danville, VA on the VA/NC border. Brad Jaeger (see http://www.bradjaeger.com) is the son of AMSAT member Jim Jaeger (K8RQ) and is piloting the bright yellow #77 Doran Racing Kodak Ford machine (which you can see at http://www.bradjaeger.com/?q=node/110 and at http://www.grand-am.com/rolex/drivers/driver.cfm?did=1110). K8RQ has arranged for AMSAT to display its colors on Brad's car on a "space available" basis. If you can make it to Danville for the weekend, the detailed schedule of events can be found at http://www.grand-am.com/assets/08VIROfficialSched2.pdf. But if you can't make it, the race will be carried on the cable SPEED channel from 12:00 to 15:00 EDT on Saturday, May 3rd. For more details about the Grand-Am Rolex racing series, see http://www.grand-am.com/rolex/ and http://www.virclub.com/latest-news/bosch-engineering-becomes-title-sponsor-…. 73 de Tom, K3IO

2 1

Delfi-C3 telemetry decoding software test
by Wattage Perera 22 Apr '08

22 Apr '08

Hi to the BB, I was able to locally test the Delfi-C3 RASCAL software using the 5MB telemetry sound file from the Delfi-C3 website using my computer with the following method. Set your computer Sound Recording Device Properties using the following path. I am using Windows XP Home Edition. Control Panel ---- Sounds and Audio Devices ---- Sounds and Audio Devices Properties ---- Click on Audio tab ---- Click on Sound Recording Volume tab ---- Select Mono Mix on Sound Recorder Properties ---- Set the recording volume level to half way on the scale. Now make sure you have a check mark in the Sound Recorder select box. Download the 5MB WAV file onto your desktop from the following link in the Delfi-C3 website: http://www.delfic3.nl/index.php?option=com_content&task=view&id=23&Itemid=1… Open the computer Sound Recorder program ( All Programs ---- Accessories ---- Entertainment ---- Sound Recorder ) or use the Windows Media Player. Play back the telemetry sound file you downloaded. Open the Delfi-C3 RASCAL software. Now you should see the software screen decoding the playback telemetry sound file. You can set the audio level by adjusting the computer Sound Recorder Volume level setting. 73, Kumara Perera VE4WKP

2 1

Re: Kenwood TH-F6a
by Clint Bradford 22 Apr '08

22 Apr '08

> .. is the TH-F6A my best choce for HT? for sats, ... or at least in > the top two?? Before I go down thr street to HRO and plunk down the > money... The TH-F6a is an excellent performer. It is NOT, however, a true full- duplex unit. It is a tri-band, dual receive unit. Full power output on all three bands (2M, 220, and 440). If you want/need dual-receive, it's a great unit. Minor drawback: Using its optional AA Alkaline pack, you're only operating at 1/2 W. Clint Bradford,K6LCS 909-241-7666

2 1