February 2012 - AMSAT-BB - mailman.amsat.org

CHIBIS-M
by David Hopkins 03 Feb '12

03 Feb '12

Gentlemen, Anyone heard CHIBIS-M at all today? I have listened on three pass today, but heard nothing. David David G. Hopkins (VK4ZF) CAPALABA QLD AUSTRALIA 27.32.38S 153.12.03E QG62OL Skype :- davhop

1 0

USB Rotor Controller - $17.40
by Thomas Doyle 03 Feb '12

03 Feb '12

Someone might find this interesting. http://www.tomdoyle.org/CheapRotorController/ 73 W9KE Tom Doyle

1 0

InstantTrack and windows 7
by Scott Smith 03 Feb '12

03 Feb '12

Hi folks, just updated one of my computers to windows 7. Does InstantTrack work with this version of windows?. Have no problem on my other computers using windows XP. Any help appreciated . 73 de VE6ITV Scott

5 4

GPS Time observation
by Vince Fiscus, KB7ADL 02 Feb '12

02 Feb '12

I have an old GPS unit, a Magellan explorist 210. It's fairly accurate determining position. After it has acquired about eight to ten satellites the position error averages between 20 to 35 feet. Now the question, the other day I was looking at one of the information pages the unit can display and on it, it gives the time in UTC. Just for fun I thought I would see how close the time was to WWV. I was surprised to see the unit was between one to four seconds off over various tests compared to WWV. IS this typical of all GPS units or do some display the time of day more accurately? KB7ADL

7 11

re instanttrack and windows 7
by Scott Smith 02 Feb '12

02 Feb '12

Thanks to Bruce and Alan i now have InstantTrack working on my windows 7 computer appreciate the help guys have a great day. 73 de VE6ITV Scott

1 0

HudsonValleySatcomGroupNetTonight@8PMOnEcholink N2EYH-L OR MtBeacon Repeater 146.970pl100
by cotejaune2＠aol.com 02 Feb '12

02 Feb '12

Please join us for the Net tonight Feb 02 on Echolink N2EYH-L @ 8PM.All the cool people will be there.73 de WA2AQH Garty/KC2DTQ Tom

1 0

SatPC32 rotor question
by Dave Webb KB1PVH 02 Feb '12

02 Feb '12

I had this question posted to me, and I can't seem to figure out if it is possible. >.I want my rotator to stop at about 85 Deg elevation and not go to 90 , 100 , 110 etc etc but to rotate on its asmith by >180 deg and then start to drop elevation from 85 Deg.. I know that the rotor interface unit, ERC can be limited via it's service tool software, but I wasn't sure how SatPC32 would react to the interface unit limiting it. Dave - KB1PVH

2 1

FW: New version - Masat Ground station Client software
by Nitin Muttin 02 Feb '12

02 Feb '12

All, FYI , New version of the telemetry decoding application for MASAT-1 is available at http://cubesat.bme.hu/en/foldi-allomas/kliens-szoftver/ 73 Nitin [VU3TYG] From: zemei88(a)gmail.com [mailto:[email protected]] On Behalf Of Tibor Mezei Sent: Thursday, February 02, 2012 6:03 AM To: Nitin Muttin [VU3TYG] Subject: Re: Masat Ground station Client software Dear Nitin, the newest version of the MASAT-1 client software is available on our website: http://cubesat.bme.hu/en/foldi-allomas/kliens-szoftver/ Regards, Tibor Mezei 2012/1/31 Nitin Muttin [VU3TYG] <vu3tyg(a)amsatindia.org>: > Thanks Tibor for the update. > -- > Regards > > Nitin [VU3TYG] > Secretary, AMSAT India > vu3tyg(a)amsatindia.org > www.amsatindia.org > > > --------- Original Message -------- > From: Tibor Mezei <mezei(a)cubesat.bme.hu> > To: vu3tyg(a)amsatindia.org <vu3tyg(a)amsatindia.org> > Subject: Re: Masat Ground station Client software > Date: 29/01/12 22:53 > >> Hello,thank you for your interest. The disabled functions are used by our > own ground station.They are not necessary for the reception of MASAT-1.The > recommended sample rates are the multiples of baud rate (like 43750 Hz). >> The baud rate is 625, which can be found at our website: > http://cubesat.bme.hu/en/foldi-allomas/radioamatoroknek/There will be a new > version of the MASAT-1's Ground Station Client Software this week. >> The update is recommended, since it will contain a number of improvements > and fixes.If you find any problem with it please send me a report.Best > regards,Tibor Mezei2012/1/29 Nitin Muttin <vu3tyg(a)amsatindia.org>

1 0

All ARISSat-1 Keps
by Joseph Armbruster 02 Feb '12

02 Feb '12

Amsateers! I was interested in obtaining a complete set of ARISSat-1 Keps for analysis. I requested them from the AFSPC and received permission to place them in the public domain. See my blog for the complete list here: http://libjoe.blogspot.com/2012/02/all-arissat-1-keplerian-elements.html Joseph Armbruster KJ4JIO

1 0

IC-9100 great deal
by Stefan Wagener 01 Feb '12

01 Feb '12

Don't know how many of you are looking for an IC-9100. How about this one on Ebay: 330680617795 No, I am not the seller or affiliated. Stefan, VE4NSA

1 0