April 2016 - AMSAT-BB - mailman.amsat.org

Re: [amsat-bb] First ISS SSTV pictures are received!
by Richard Tejera 13 Apr '16

13 Apr '16

Doh!, checked frequency in memory, had it at 145.850. That slap you hear some face palming my self. Rick Tejera K7TEJ Saguaro Astronomy Club www.SaguaroAstro.org Thunderbird Amateur Radio Club www.w7tbc.org On April 12, 2016, at 17:53, "J. Boyd (JR2TTS)" <the2belo(a)msd.biglobe.ne.jp> wrote: On Tue, 12 Apr 2016 20:43:52 -0400, Paul Stoetzer <n8hm(a)arrl.net> wrote: > Sure you're listening to 145.800 MHz? It's so loud, you should only need a > wet noodle as the antenna. I'm using a discone and experienced almost no fading whatsoever. The signal sounded like it was coming from across the street. Amazing what 25W can do, even at that distance... Also I noted that in my particular program (SDR#) the center of the signal was actually at 145.804 (and didn't actually drift that much from there, even with Doppler). -- J. Boyd, JR2TTS/NI3B the2belo(a)msd.biglobe.ne.jp http://www.flickr.com/photos/the2belo/ http://www.qrz.com/db/JR2TTS Twitter: @Minus2_C _______________________________________________ Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

1 0

Re: [amsat-bb] First ISS SSTV pictures are received!
by J. Boyd (JR2TTS) 13 Apr '16

13 Apr '16

On Tue, 12 Apr 2016 20:43:52 -0400, Paul Stoetzer <n8hm(a)arrl.net> wrote: > Sure you're listening to 145.800 MHz? It's so loud, you should only need a > wet noodle as the antenna. I'm using a discone and experienced almost no fading whatsoever. The signal sounded like it was coming from across the street. Amazing what 25W can do, even at that distance... Also I noted that in my particular program (SDR#) the center of the signal was actually at 145.804 (and didn't actually drift that much from there, even with Doppler). -- J. Boyd, JR2TTS/NI3B the2belo(a)msd.biglobe.ne.jp http://www.flickr.com/photos/the2belo/ http://www.qrz.com/db/JR2TTS Twitter: @Minus2_C

1 0

Re: [amsat-bb] First ISS SSTV pictures are received!
by Patrick STODDARD (WD9EWK/VA7EWK) 13 Apr '16

13 Apr '16

Hi Rick, The pass around 2130 UTC today (2.30pm local time) was a nice and high pass over central Arizona. I had two stations going, copying the downlink and recording what I received on both stations. I really need to get set up to use my Elk with more than one radio, or hold two Elks as the ISS passes by. :-) I'm hoping to decode what I copied tonight. I copied about 1/2 of one picture, and all of another. I think there may have been one spot where my SDRplay/HDSDR/Elk setup had something pop up and interfere with the downlink - a truck passed by my yard at that time. 73! Patrick WD9EWK/VA7EWK http://www.wd9ewk.net/ Twitter: @WD9EWK On Wed, Apr 13, 2016 at 12:35 AM, Richard Tejera <Saguaroastro(a)cox.net> wrote: > Didn't hear a thing on that pass from AZ (DM43) > > Rick Tejera K7TEJ >

1 0

Re: [amsat-bb] ISS SSTV Program
by Pedro Converso 12 Apr '16

12 Apr '16

Hi Ted, Try RX-SSTV , is much more effective, auto sync, auto slant and auto select mode. If can't find in internet, you can download from http://amsat.org.ar/Setup_RXSSTV.exe 73, lu7abf, Pedro

1 0

ISS SSTV Program
by Ted 12 Apr '16

12 Apr '16

Is there a more preferred SSTV program other than MMSTV ver 1.13A ? Thanks for any input 73, Ted K7TRK

1 0

voice on ISS
by andy thomas 12 Apr '16

12 Apr '16

I heard in English "Romeo four" on the 145.800 downlink at the 1525 utc pass here. The pass was to the East so unless I demolish the house next door I have a very poor access in that direction. Think the voice was on top of the video but could not decode video. back in 104 minutes! 73 de andy g0sfj

1 0

Re: [amsat-bb] Dragon first stage recovery?
by Ross Whenmouth 12 Apr '16

12 Apr '16

Hi, > >From Spaceflight Now: "SpaceX technicians stationed on a boat near > the drone ship planned to weld steel shoes over the rocket?s four > carbon fiber and aluminum landing legs to keep the 156-foot-tall stage > from tipping over. The recovery crew will safe the rocket, drain it of > hazardous fluids and gases, and set course for Port Canaveral, the > drone ship?s home base. I'd like to think that the recovery crew will drain the fluids and gases, and inert the rocket's propellant tanks *before* the welders start on those shoes - I for one would not want to be welding anywhere near a not-quite-empty and not yet inerted booster. 73 ZL2WRW Ross Whenmouth

1 0

ISS SSTV Active
by Nitin Muttin 12 Apr '16

12 Apr '16

SSTV active during the 7.35 UTC pass over India 73 Nitin [VU3TYG]

1 0

Rig in for repair
by Richard Lawn 12 Apr '16

12 Apr '16

I'll be off the birds for about 2 weeks while my 9100 is getting the ALC overshoot problem taken care of by icom techs. I wouldn't have bothered but I plan to begin to try some eme operation with an amp so I didn't want to risk frying the finals. I'll miss the birds! 73 Rick, W2JAZ -- Sent from Gmail Mobile

1 0

Ao85 doppler,sqf
by jeffory broughton 11 Apr '16

11 Apr '16

That pair works perfect. Use wb tx low mic gain Of nb tx with higher mic gain Monitor your D.L.for cleanest audio. Good luck. jeff broughton

1 0