- AMSAT-BB - mailman.amsat.org

UVSQ-transponder question
by JOHN GEIGER 17 Jul '24

17 Jul '24

Is the FM transponder ever turned on on UVSQ any longer, and if it is, how can I find the schedule? They used to post activations on this list but I haven't seen any emails about it for some time. 73 John AF5CC Sent using {0}

1 0

Re: sqf for mesat1
by Mark L. Hammond 17 Jul '24

17 Jul '24

Very handy, Mark. Here is a line that should work.. MESAT1,435798.8,145925.0,USB,LSB,REV,0,0,Telem Beacon Mark L. Hammond [N8MH] AMSAT Director and Command Station On Wed, Jul 17, 2024 at 7:57 AM Mark Johns, K0JM via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > https://www.amsat.org/doppler-sqf-line-generator/ > -- > Mark D. Johns, KØJM > AMSAT Ambassador & News Service Editor > Brooklyn Park, MN USA EN35hd > ----------------------------------------------- > "Heaven goes by favor; if it went by merit, > you would stay out and your dog would go in." > ---Mark Twain > > > On Tue, Jul 16, 2024 at 11:39 PM Bob Johnson via AMSAT-BB < > amsat-bb(a)amsat.org> wrote: > >> I'm looking for the sqf file for mesat1 >> 73 Bob W7LRD >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available >> to all interested persons worldwide without requiring membership. >> Opinions expressed >> are solely those of the author, and do not reflect the official views of >> AMSAT-NA. >> Acceptable Use and Privacy Policies available at >> https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org >> Manage all of your AMSAT-NA mailing list preferences at >> https://mailman.amsat.org > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org

1 0

Re: sqf for mesat1
by Mark Johns, K0JM 17 Jul '24

17 Jul '24

https://www.amsat.org/doppler-sqf-line-generator/ -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain On Tue, Jul 16, 2024 at 11:39 PM Bob Johnson via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > I'm looking for the sqf file for mesat1 > 73 Bob W7LRD > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org

1 0

sqf for mesat1
by Bob Johnson 17 Jul '24

17 Jul '24

I'm looking for the sqf file for mesat1 73 Bob W7LRD

1 0

Re: MESAT1 telemetry with FlexRadio
by Mark L. Hammond 16 Jul '24

16 Jul '24

Hello JoAnne and friends--- For the IC-9700 I'm using just USB (not USB-D) and have reset the filters as wide as possible for that mode (all three in fact, so it's always the right one, hihi).. I can print using audio over USB or from the ACC1 jack on the back into an external sound card, so we have several options for getting audio.from the 9700. In Foxtelem, be sure to use Telem Format "BPSK 1200bps LTM". I try to adjust the RX frequency so the bottom left screen shows "Carrier: " values of about 1200-1500. The TLEs are good and have been, which makes the Doppler corrections good enough for automation. I'm working on the station at the university and need to tweak a few things, but the M2 Leo pack is just enough to print the bird when elevations are "good". The preamp is inside, so fixin' that is in the near future. So, keep at it, group! This is an opportunity for many of us to work on the 70cm receiving sensitivity of our stations--that's what I'm doing ;) 73, Mark L. Hammond [N8MH] AMSAT Director and Command Station On Tue, Jul 16, 2024 at 6:16 PM JoAnne Maenpaa via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > Charlie and David, > > Thanks for the pointers. I've found a couple of things to tweak based on > your messages. > > I'm using the S.A.T. tracker box so I don't have SQF files - but I've > tweaked it's satellite frequency there so I'm hoping I'll be closer to the > frequency. > > I'm using my Greencube setup where the IC-9700 received USB-D audio goes > into the UZ7HO soundmodem then the OZ9AAR terminal. I hope that I'm not too > far off track substituting the FoxTelem software configuration in place of > the Greencube software configuration. > > Let's see what happens after a few MESAT1 passes, > > > On 7/16/2024 3:49 PM, Charles Rubenstein via AMSAT-BB wrote: > > I am using a Flex 6600M with Q5 Xvrtrs. Here is what I’m using for MESAT1 > telemetry. > > I am using a download frequency of *435798.5*. You should use USB (DIGIU > on the Flex) Make an entry using this downlink frequency in your > Doppler.SQF file, and restart SatPC32. Make sure you are using DAX > *Audio *RX1, not DAX IQ. > > In the telemetry software, I also checked the box “find signal” (I *think* this > might be AFC) > Make sure you also check the box to upload data. > > I have successfully captured data from 8 passes. > > The satellite isn’t real strong, but it has been improving. The best > passes here in EM79 have been early mornings (before I wake up hi hi) but I > had success with that setup. > > YMMV, > > 73 de Charlie KB8CR > > > On Jul 16, 2024, at 4:34 PM, Mark Johns, K0JM via AMSAT-BB > <amsat-bb(a)amsat.org> <amsat-bb(a)amsat.org> wrote: > > I appreciate knowing I'm in good company, JoAnne. > > Yes, I get roughly 10 seconds transmitted every two minutes. I hear it 3 > or 4 times in a pass. I keep trying different modes in FoxTelem, but > nothing locks up. > -- > Mark D. Johns, KØJM > AMSAT Ambassador & News Service Editor > Brooklyn Park, MN USA EN35hd > ----------------------------------------------- > "Heaven goes by favor; if it went by merit, > you would stay out and your dog would go in." > ---Mark Twain > > > On Tue, Jul 16, 2024 at 3:02 PM JoAnne Maenpaa via AMSAT-BB < > amsat-bb(a)amsat.org> wrote: > >> > If anyone else out there is successfully using a similar setup, I'd >> like to hear from you off list. >> >> It would be OK to reply on the list also. >> >> I've been listening with an IC-9700 w/ LEO pack and FoxTelem software. >> I've also been hearing strong signals but so far decoding nothing. If I >> am indeed hearing MESAT1 then a single ~5-10 second burst of data once >> per pass hasn't helped with testing my setup - and fixing things that >> need attention. >> >> Decoding prior Fox satellites with FoxTelem has been pretty >> straigtforward. >> >> -- >> 73 de JoAnne K9JKM >> joanne.k9jkm(a)gmail.com >> BM DMR TG 98006 >> >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available >> to all interested persons worldwide without requiring membership. >> Opinions expressed >> are solely those of the author, and do not reflect the official views of >> AMSAT-NA. >> Acceptable Use and Privacy Policies available at >> https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org >> Manage all of your AMSAT-NA mailing list preferences at >> https://mailman.amsat.org >> > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org > > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions expressed > are solely those of the author, and do not reflect the official views of AMSAT-NA. > Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ > > View archives of this mailing list athttps://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org > > > -- > 73 de JoAnne K9JKMjoanne.k9jkm(a)gmail.com > BM DMR TG 98006 > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org

1 0

Re: MESAT1 telemetry with FlexRadio
by JoAnne Maenpaa 16 Jul '24

16 Jul '24

Charlie and David, Thanks for the pointers. I've found a couple of things to tweak based on your messages. I'm using the S.A.T. tracker box so I don't have SQF files - but I've tweaked it's satellite frequency there so I'm hoping I'll be closer to the frequency. I'm using my Greencube setup where the IC-9700 received USB-D audio goes into the UZ7HO soundmodem then the OZ9AAR terminal. I hope that I'm not too far off track substituting the FoxTelem software configuration in place of the Greencube software configuration. Let's see what happens after a few MESAT1 passes, On 7/16/2024 3:49 PM, Charles Rubenstein via AMSAT-BB wrote: > I am using a Flex 6600M with Q5 Xvrtrs. Here is what I’m using for > MESAT1 telemetry. > > I am using a download frequency of *435798.5*. You should use USB > (DIGIU on the Flex) Make an entry using this downlink frequency in > your Doppler.SQF file, and restart SatPC32. Make sure you are using > DAX *Audio *RX1, not DAX IQ. > > In the telemetry software, I also checked the box “find signal” (I > /think/ this might be AFC) > Make sure you also check the box to upload data. > > I have successfully captured data from 8 passes. > > The satellite isn’t real strong, but it has been improving. The best > passes here in EM79 have been early mornings (before I wake up hi hi) > but I had success with that setup. > > YMMV, > > 73 de Charlie KB8CR > > >> On Jul 16, 2024, at 4:34 PM, Mark Johns, K0JM via AMSAT-BB >> <amsat-bb(a)amsat.org> wrote: >> >> I appreciate knowing I'm in good company, JoAnne. >> >> Yes, I get roughly 10 seconds transmitted every two minutes. I hear >> it 3 or 4 times in a pass. I keep trying different modes in FoxTelem, >> but nothing locks up. >> -- >> Mark D. Johns, KØJM >> AMSAT Ambassador & News Service Editor >> Brooklyn Park, MN USA EN35hd >> ----------------------------------------------- >> "Heaven goes by favor; if it went by merit, >> you would stay out and your dog would go in." >> ---Mark Twain >> >> >> On Tue, Jul 16, 2024 at 3:02 PM JoAnne Maenpaa via AMSAT-BB >> <amsat-bb(a)amsat.org> wrote: >> >> > If anyone else out there is successfully using a similar >> setup, I'd >> like to hear from you off list. >> >> It would be OK to reply on the list also. >> >> I've been listening with an IC-9700 w/ LEO pack and FoxTelem >> software. >> I've also been hearing strong signals but so far decoding >> nothing. If I >> am indeed hearing MESAT1 then a single ~5-10 second burst of data >> once >> per pass hasn't helped with testing my setup - and fixing things >> that >> need attention. >> >> Decoding prior Fox satellites with FoxTelem has been pretty >> straigtforward. >> >> -- >> 73 de JoAnne K9JKM >> joanne.k9jkm(a)gmail.com >> BM DMR TG 98006 >> >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org <http://amsat.org/>. AMSAT-NA makes >> this open forum available >> to all interested persons worldwide without requiring membership. >> Opinions expressed >> are solely those of the author, and do not reflect the official >> views of AMSAT-NA. >> Acceptable Use and Privacy Policies available at >> https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org >> <http://amsat.org/> >> Manage all of your AMSAT-NA mailing list preferences at >> https://mailman.amsat.org >> >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available >> to all interested persons worldwide without requiring membership. >> Opinions expressed >> are solely those of the author, and do not reflect the official views >> of AMSAT-NA. >> Acceptable Use and Privacy Policies available at >> https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org >> Manage all of your AMSAT-NA mailing list preferences at >> https://mailman.amsat.org > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions expressed > are solely those of the author, and do not reflect the official views of AMSAT-NA. > Acceptable Use and Privacy Policies available athttps://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences athttps://mailman.amsat.org -- 73 de JoAnne K9JKM joanne.k9jkm(a)gmail.com BM DMR TG 98006

1 0

Re: MESAT1 telemetry with FlexRadio
by Charles Rubenstein 16 Jul '24

16 Jul '24

I am using a Flex 6600M with Q5 Xvrtrs. Here is what I’m using for MESAT1 telemetry. I am using a download frequency of 435798.5. You should use USB (DIGIU on the Flex) Make an entry using this downlink frequency in your Doppler.SQF file, and restart SatPC32. Make sure you are using DAX Audio RX1, not DAX IQ. In the telemetry software, I also checked the box “find signal” (I think this might be AFC) Make sure you also check the box to upload data. I have successfully captured data from 8 passes. The satellite isn’t real strong, but it has been improving. The best passes here in EM79 have been early mornings (before I wake up hi hi) but I had success with that setup. YMMV, 73 de Charlie KB8CR > On Jul 16, 2024, at 4:34 PM, Mark Johns, K0JM via AMSAT-BB <amsat-bb(a)amsat.org> wrote: > > I appreciate knowing I'm in good company, JoAnne. > > Yes, I get roughly 10 seconds transmitted every two minutes. I hear it 3 or 4 times in a pass. I keep trying different modes in FoxTelem, but nothing locks up. > -- > Mark D. Johns, KØJM > AMSAT Ambassador & News Service Editor > Brooklyn Park, MN USA EN35hd > ----------------------------------------------- > "Heaven goes by favor; if it went by merit, > you would stay out and your dog would go in." > ---Mark Twain > > > On Tue, Jul 16, 2024 at 3:02 PM JoAnne Maenpaa via AMSAT-BB <amsat-bb(a)amsat.org <mailto:[email protected]>> wrote: >> > If anyone else out there is successfully using a similar setup, I'd >> like to hear from you off list. >> >> It would be OK to reply on the list also. >> >> I've been listening with an IC-9700 w/ LEO pack and FoxTelem software. >> I've also been hearing strong signals but so far decoding nothing. If I >> am indeed hearing MESAT1 then a single ~5-10 second burst of data once >> per pass hasn't helped with testing my setup - and fixing things that >> need attention. >> >> Decoding prior Fox satellites with FoxTelem has been pretty straigtforward. >> >> -- >> 73 de JoAnne K9JKM >> joanne.k9jkm(a)gmail.com <mailto:[email protected]> >> BM DMR TG 98006 >> >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org <http://amsat.org/>. AMSAT-NA makes this open forum available >> to all interested persons worldwide without requiring membership. Opinions expressed >> are solely those of the author, and do not reflect the official views of AMSAT-NA. >> Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org <http://amsat.org/> >> Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org <https://mailman.amsat.org/> > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions expressed > are solely those of the author, and do not reflect the official views of AMSAT-NA. > Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

TEVEL-3
by david.greenberg 16 Jul '24

16 Jul '24

Hello All,TEVEL-3 FM transponder has been activated, starting from today 16.07.24 20:41U for 72 hours.73,David 4X1DGנשלח מה-Galaxy שלי

1 0

Re: MESAT1 telemetry with FlexRadio
by Mark Johns, K0JM 16 Jul '24

16 Jul '24

I appreciate knowing I'm in good company, JoAnne. Yes, I get roughly 10 seconds transmitted every two minutes. I hear it 3 or 4 times in a pass. I keep trying different modes in FoxTelem, but nothing locks up. -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain On Tue, Jul 16, 2024 at 3:02 PM JoAnne Maenpaa via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > > If anyone else out there is successfully using a similar setup, I'd > like to hear from you off list. > > It would be OK to reply on the list also. > > I've been listening with an IC-9700 w/ LEO pack and FoxTelem software. > I've also been hearing strong signals but so far decoding nothing. If I > am indeed hearing MESAT1 then a single ~5-10 second burst of data once > per pass hasn't helped with testing my setup - and fixing things that > need attention. > > Decoding prior Fox satellites with FoxTelem has been pretty straigtforward. > > -- > 73 de JoAnne K9JKM > joanne.k9jkm(a)gmail.com > BM DMR TG 98006 > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

1 0

Re: MESAT1 telemetry with FlexRadio
by JoAnne Maenpaa 16 Jul '24

16 Jul '24

> If anyone else out there is successfully using a similar setup, I'd like to hear from you off list. It would be OK to reply on the list also. I've been listening with an IC-9700 w/ LEO pack and FoxTelem software. I've also been hearing strong signals but so far decoding nothing. If I am indeed hearing MESAT1 then a single ~5-10 second burst of data once per pass hasn't helped with testing my setup - and fixing things that need attention. Decoding prior Fox satellites with FoxTelem has been pretty straigtforward. -- 73 de JoAnne K9JKM joanne.k9jkm(a)gmail.com BM DMR TG 98006

1 0