- AMSAT-BB - mailman.amsat.org

Upcoming ARISS Contact Schedule as of 2024-01-17 05:00 UTC
by aj9n＠aol.com 17 Jan '24

17 Jan '24

Upcoming ARISS Contact Schedule as of 2024-01-17 05:00 UTC Quick list of scheduled contacts and events: IC Statale Villa Guardia, Villa Guardia, Italy, telebridge via ZS6JON (***) The ISS callsign is presently scheduled to be TBD The downlink frequency is presently scheduled to be 145.800 MHz The latest information on the operation mode can be found at https://www.ariss.org/current-status-of-iss-stations.html The scheduled crewmember is Walter Villadei IUØRWB The ARISS mentor is IZ2GOJ Contact is go for: Mon 2024-01-22 09:35:49 UTC 44 deg (***) Istituto Comprensivo “Anna Rita Sidoti”, Gioiosa Marea, Italy, direct via IT9DBI The ISS callsign is presently scheduled to be IRØISS The downlink frequency is presently scheduled to be 145.800 MHz The latest information on the operation mode can be found at https://www.ariss.org/current-status-of-iss-stations.html The scheduled crewmember is Walter Villadei IUØRWB The ARISS mentor is IKØWGF Contact is go for: Wed 2024-01-24 14:37:22 UTC 40 deg (***) The crossband repeater continues to be active. If any crewmember is so inclined, all they have to do is pick up the microphone, raise the volume up, and talk on the crossband repeater. So give a listen, you just never know. Note, all times are approximate. It is recommended that you do your own orbital prediction or start listening about 10 minutes before the listed time. All dates and times listed follow International Standard ISO 8601 date and time format YYYY-MM-DD HH:MM:SS The complete schedule page has been updated as of 2024-01-17 05:00 UTC. (***) Here you will find a listing of all scheduled school contacts, and questions, other ISS related websites, IRLP and Echolink websites, and instructions for any contact that may be streamed live. https://www.amsat.org/amsat/ariss/news/arissnews.rtf https://www.amsat.org/amsat/ariss/news/arissnews.txt The successful school list has been updated as of 2023-12-14 18:00 UTC. https://www.amsat.org/amsat/ariss/news/Successful_ARISS_schools.rtf ####################################################################################################################################### Comments on making general contacts I have been seeing a lot of traffic on Facebook and I suspect on other social media sites with people asking why they are not hearing the crew make general contacts. First off the crew is very busy on the ISS and they simply may not have the time to just pick up the microphone and talk. Also, one needs to be aware of their normal daily schedule. I have listed below the constraints that we at ARISS have to follow in order to schedule the school contacts. Hopefully this will help you better schedule your opportunities. Typical daily schedule Wakeup to Workday start= 1.5 hours Workday start to Workday end=12 hours Workday end to Sleep= 2 hours Sleep to wakeup= 8.5 hours The crew's usual waking period is 07:30 – 19:30 UTC. The most common times to find a crew member making casual periods are about one hour after waking up and about an hour before sleeping, when they have personal time. They're usually free most of the weekend, as well. SSTV events are not that often. So please check out https://www.ariss.org/ for the latest information or watch for the ARISS announcements. And don’t forget that the packet system is sometimes active. Check the status at https://www.ariss.org/ or http://www.issfanclub.eu to see if the packet system is active or not. As always, if there is an EVA, a docking, or an undocking; the ARISS radios are turned off as part of the safety protocol. The latest information on the operation mode can be found at https://www.ariss.org/current-status-of-iss-stations.html The latest list of frequencies in use can be found at https://www.ariss.org/contact-the-iss.html ######################################################################################################################################## A multi-point telebridge contact means that each student will be on the telebridge from their own home. **************************************************************************************************************************************** ARISS is very aware of the impact that COVID-19 is having on schools and the public in general. As such, we may have last minute cancellations or postponements of school contacts. As always, I will try to provide everyone with near-real-time updates. Watch for future COVID-19 related announcements at https://www.ariss.org/ The following schools have now been postponed or cancelled due to COVID-19: Postponed: No new schools Cancelled: No new schools **************************************************************************************************************************************** The ARISS webpage is at https://www.ariss.org/ Note that there are links to other ARISS websites from this site. The main page for Applying to Host a Scheduled Contact may be found at https://www.ariss.org/apply-to-host-an-ariss-contact.html +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ARISS Contact Applications (United States) Call for Proposals The next proposal window for US schools and educational organizations to host an Amateur Radio contact with a crew member on board the ISS opens October 1, 2023 for contacts to be scheduled for July 1, 2024 – December 31, 2024. This proposal is due to ARISS by November 10, 2023 at 11:59 PM Pacific Time. Proposal information and more details such as expectations, proposal guidelines and the proposal form can be found at www.ariss.org. An ARISS Introductory Webinar session will be held on October 5 2023 at 7 PM ET. The Eventbrite link to sign up is: https://ariss-proposal-webinar-fall-2023.eventbrite.com Find more information and proposal instructions, visit the ARISS-USA website at: https://ariss-usa.org/hosting-an-ariss-contact-in-the-usa/ Please direct any questions to ariss.us.education(a)gmail.com. For future proposal information and more details such as expectations, proposal guidelines and proposal form, and dates and times of Information Webinars, go to www.ariss.org. About ARISS: Amateur Radio on the International Space Station (ARISS) is a cooperative venture of international amateur radio societies and the space agencies that support the International Space Station (ISS). In the United States, sponsors are the Radio Amateur Satellite Corporation (AMSAT), the American Radio Relay League (ARRL), the ISS National Lab and National Aeronautics and Space Administration (NASA). The primary goal of ARISS is to promote exploration of science, technology, engineering, and mathematics (STEAM) topics by organizing scheduled contacts via amateur radio between crew members aboard the ISS and students in classrooms or public forms. Before and during these radio contacts, students, educators, parents, and communities learn about space, space technologies, and amateur radio. For more information, see www.ariss.org. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ARISS Contact Applications (Europe, Africa and the Middle East) Schools and Youth organizations in Europe, Africa and the Middle East interested in setting up an ARISS radio contact with an astronaut on board the International Space Station are invited to submit an application from September to October and from February to April. Please refer to details and the application form at www.ariss-eu.org/school-contacts. Applications should be addressed by email to: school.selection.manager(a)ariss-eu.org ARISS Contact Applications (Canada, Central and South America, Asia and Australia and Russia) +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Organizations outside the United States can apply for an ARISS contact by filling out an application. Please direct questions to the appropriate regional representative listed below. If your country is not specifically listed, send your questions to the nearest ARISS Region listed. If you are unsure which address to use, please send your question to the ARISS-Canada representative; they will forward your question to the appropriate coordinator. For the application, go to: https://www.ariss.org/ariss-application.html. ARISS-Canada and the Americas, except USA: Steve McFarlane, VE3TBD email to: ve3tbd(a)gmail.com ARISS-Japan, Asia, Pacific and Australia: Satoshi Yasuda, 7M3TJZ email to: ariss(a)iaru-r3.org, Japan Amateur Radio League (JARL) https://www.jarl.org/ ARISS-Russia: Soyuz Radioljubitelei Rossii (SRR) https://srr.ru/ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ARISS is always glad to receive listener reports for the above contacts. ARISS thanks everyone in advance for their assistance. Feel free to send your reports to aj9n(a)amsat.org or aj9n(a)aol.com. Listen for the ISS on the downlink of 145.8Ø MHz unless otherwise noted. ******************************************************************************* All ARISS contacts are made via the Kenwood radio unless otherwise noted. ******************************************************************************* Several of you have sent me emails asking about the RAC ARISS website and not being able to get in. That has now been changed to https://www.ariss.org/ Note that there are links to other ARISS websites from this site. **************************************************************************** Looking for something new to do? How about receiving DATV from the ISS? Please note that the HamTV system has been brought back to earth for troubleshooting. Please monitor ARISS-EU or ARISS-ON for the very latest news on the troubleshooting efforts. If interested, then please go to the ARISS-EU website for complete details. Look for the buttons indicating Ham Video. http://www.ariss-eu.org/ If you need some assistance, ARISS mentor Kerry N6IZW, might be able to provide some insight. Contact Kerry at kbanke(a)sbcglobal.net The HamTV webpage: https://www.amsat-on.be/hamtv-summary/ **************************************************************************** ARISS congratulates the following mentors who have now mentored over 100 schools: Sergey RV3DR with 220 Francesco IKØWGF with 152 Satoshi 7M3TJZ with 150 Gaston ON4WF with 124 Peter IN3GHZ with 118 Steve VE3TBD with 106 **************************************************************************** The webpages listed below were all reviewed for accuracy. Out of date webpages were removed, and new ones have been added. If there are additional ARISS websites I need to know about, please let me know. Total number of ARISS ISS to earth school events is 1683. Each school counts as 1 event. Total number of ARISS ISS to earth school contacts is 1589. Each contact may have multiple schools sharing the same time slot. Total number of ARISS supported terrestrial contacts is 48. Please feel free to contact me if more detailed statistics are needed. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ The following US states and entities have never had an ARISS contact: South Dakota, American Samoa, Guam, Northern Marianas Islands, and the Virgin Islands. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ QSL information may be found at: https://www.ariss.org/qsl-cards.html ISS callsigns: DPØISS, FXØISS, GB1SS, IRØISS, NA1SS, OR4ISS, RSØISS **************************************************************************** Frequency chart for packet, voice, and crossband repeater modes showing Doppler correction as of 2005-07-29 04:00 UTC https://www.amsat.org/amsat/ariss/news/ISS_frequencies_and_Doppler_correcti… Check out the Zoho reports of the ARISS contacts https://reports.zoho.com/ZDBDataSheetView.cc?DBID=412218000000020415 **************************************************************************** SpaceX Crew-7 on orbit Jasmin Moghbeli KI5WSL Andreas Mogensen KG5GCZ Satoshi Furukawa Konstantin Borisov Exp. 70 on orbit Oleg Kononenko Nikolay Chub Loral O’Hara KI5TOM **************************************************************************** 73, Charlie Sufana AJ9N One of the ARISS operation team mentors

1 0

Satpc32 and 736 will not connect via CAT
by garyschafer＠largeriver.net 16 Jan '24

16 Jan '24

I just purchased an Ea7tx AZ/EL rotor controller and installed the software. I got the rotor controller working from Satpc32 but when I went back to the radio Satpc32 would no longer talk to the radio. I had that working fine before installing the rotor software. I tried removing (uninstalling ) the rotor software and that did not help. Even uninstalled and reinstalled Satpc32 software without the rotor controller software. Tried several different ports but still can't make It connect to the radio (Yaesu 736). I don't think that I was able to remove the "server software) that gets put on by the rotor software? The cable to the radio from the PC is a blue max USB to serial cable. I tried another computer that never had the rotor software installed, only Satpc32, and it talked to the radio fine. Any thoughts on how to fix? Thanks Gary K4FMX

1 0

Re: SATPC32 and IC-9700 Questions
by Glen Jenkins 16 Jan '24

16 Jan '24

Hello Mark and others using SATPC32 and IC-9700, This IC-9700 Setup Instruction on Erich's site was very helpful and I now have communication between the PC and the IC-9700. It also appears that the Downlink and Uplink frequencies are getting populated properly for most satellites. The Doppler shifting is also working now. I seem to have a discrepancy with satellites that Rx and Tx on the same band, such as IO-117 that uses 70cm for both uplink and downlink. The Downlink frequency is communicated correctly from SATPC32 to the Upper section of the IC-9700 on 70cm. Yet the Lower portion of the IC-9700 shows a 2m frequency even thought SATPC32 shows that it is sending a 70cm frequency. The "TX" symbol on the IC-9700 appears only on the lower part of the display (this is the second receiver) so I cannot Tx on 70cm. The 2m Frequency is a remnant from the previous satellite that I selected. The IC-9700 cannot Rx and TX on the same band on its 2 separate transmitters/receivers in the rig. How are users of the IC-9700 working with this? Is what I have here NORMAL? I am a lot closer to getting this all working. Thank you. Glen, WB4KTF, EM10 -----Original Message----- From: <k0jm.mark(a)gmail.com> The instructions you seek are at: http://www.dk1tb.de/IC9700_Setup.pdf There are also several YouTube videos you can search for. People with SAT controllers always think that is the answer to every SatPC32 question. But one has nothing to do with the other. -- Mark D. Johns, KØJM On Mon, Jan 15, 2024 at 1:10 PM Glen Jenkins via AMSAT-BB <amsat-bb(a)amsat.org (mailto:[email protected])> wrote: Hello Amsat Members, I am totally new to Amateur Satellite work. I recently purchased and installed AMSAT's SATPC32 and want to use it with my IC-9700. I have a few questions and a request. 1 - On the IC-9700 should the receive (downlink) frequency be displayed on the UPPER portion of the screen and thus should the rig transmit on the displayed frequency that is on the lower portion of the screen (as I see the "TX" symbol there? On my setup, it appears that SATPC32 is setting the frequencies backwards. I see the satellite's Downlink frequency on the lower half of the screen with a "TX" next to it. So this must be incorrect. 2 -On the SATPC32 display should the "Downlink"display the receive frequency from the satellite and MATCH the frequency on SATPC32 in the upper half of the IC-9700 display? On my setup they do not match today, sometimes they are up to 2 MHz different. So maybe the communication between the program and the rig are not correct. 3 - I have been able to hear some stations (ex AO-73) yesterday on the 2m band.I have tried calling them. I assume that I should be able to call them and then simultaneously hear myself,but I NEVER hear myself. So how do I sync this up. My assumption is that the other station is listening for me on the same frequency so I should hear myself, I understand that the satellite repeater is receiving me on 70cm (uplink). Is there some procedure to follow in SATPC32 to get synced? 4 - Lastly, can someone please share with me their settings of the IC-9700 to make this all work? As I am new,I suppose that I'll have a few more questions until I get this all functioning correctly. Thanks to anyone and everyone who answer my questions above. 73s Glen,WB4KTF, Austin, TX EM10

2 1

TEVEL-3
by david.greenberg 16 Jan '24

16 Jan '24

Hello All, TEVEL-3 FM transponder has been activated, starting from today, 16.01.24 08:28U for 72 hours.73,David 4X1DGנשלח מה-Galaxy שלי

1 0

TEVEL-6
by david.greenberg 16 Jan '24

16 Jan '24

Hello All, TEVEL-6 FM transponder has been activated, starting from today, 16.01.24 08:02U for 72 hours.73,David 4X1DGנשלח מה-Galaxy שלי

1 0

Re: SATPC32 and IC-9700 Questions
by Fabio Roccatagliata 16 Jan '24

16 Jan '24

1 0

Re: SATPC32 and IC-9700 Questions
by JoAnne Maenpaa 16 Jan '24

16 Jan '24

> How are users of the IC-9700 working with this? SatPC32ISS should help with IO-117. It should be a part of the SatPC32 download. -- 73 de JoAnne K9JKM joanne.k9jkm(a)gmail.com BM DMR TG 98006

1 0

Re: SATPC32 and IC-9700 Questions
by Glen Jenkins 15 Jan '24

15 Jan '24

Mark, Thank you for pointing this instruction out. I am going over this now. Glen -----Original Message----- From: <k0jm.mark(a)gmail.com> Sent: Jan 15, 2024 1:23 PM To: Glen Jenkins <wb4ktf(a)pipeline.com> Cc: AMSAT-BB <amsat-bb(a)amsat.org> Subject: [AMSAT-BB] Re: SATPC32 and IC-9700 Questions The instructions you seek are at: http://www.dk1tb.de/IC9700_Setup.pdf There are also several YouTube videos you can search for. People with SAT controllers always think that is the answer to every SatPC32 question. But one has nothing to do with the other. -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain On Mon, Jan 15, 2024 at 1:10 PM Glen Jenkins via AMSAT-BB <amsat-bb(a)amsat.org (mailto:[email protected])> wrote: Hello Amsat Members, I am totally new to Amateur Satellite work. I recently purchased and installed AMSAT's SATPC32 and want to use it with my IC-9700. I have a few questions and a request. 1 - On the IC-9700 should the receive (downlink) frequency be displayed on the UPPER portion of the screen and thus should the rig transmit on the displayed frequency that is on the lower portion of the screen (as I see the "TX" symbol there? On my setup, it appears that SATPC32 is setting the frequencies backwards. I see the satellite's Downlink frequency on the lower half of the screen with a "TX" next to it. So this must be incorrect. 2 -On the SATPC32 display should the "Downlink"display the receive frequency from the satellite and MATCH the frequency on SATPC32 in the upper half of the IC-9700 display? On my setup they do not match today, sometimes they are up to 2 MHz different. So maybe the communication between the program and the rig are not correct. 3 - I have been able to hear some stations (ex AO-73) yesterday on the 2m band.I have tried calling them. I assume that I should be able to call them and then simultaneously hear myself,but I NEVER hear myself. So how do I sync this up. My assumption is that the other station is listening for me on the same frequency so I should hear myself, I understand that the satellite repeater is receiving me on 70cm (uplink). Is there some procedure to follow in SATPC32 to get synced? 4 - Lastly, can someone please share with me their settings of the IC-9700 to make this all work? As I am new,I suppose that I'll have a few more questions until I get this all functioning correctly. Thanks to anyone and everyone who answer my questions above. 73s Glen,WB4KTF, Austin, TX EM10 ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org (http://amsat.org). AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org (http://amsat.org) Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

Re: SATPC32 and IC-9700 Questions
by Pedro Converso 15 Jan '24

15 Jan '24

Hi, Although not related to SATPC32, additional check on freq/doppler could be seen/controlled by using, http://amsat.org.ar/pass.exe together with wispdde driver at http://amsat.org.ar/wispdde.exe Just click on any visible satellite to get graphic tracking and dopplers CAT control. 73, lu7abf, Pedro. On Mon, Jan 15, 2024 at 4:22 PM Mark Johns, K0JM via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > The instructions you seek are at: > http://www.dk1tb.de/IC9700_Setup.pdf > > There are also several YouTube videos you can search for. > > People with SAT controllers always think that is the answer to every > SatPC32 question. But one has nothing to do with the other. > -- > Mark D. Johns, KØJM > AMSAT Ambassador & News Service Editor > Brooklyn Park, MN USA EN35hd > ----------------------------------------------- > "Heaven goes by favor; if it went by merit, > you would stay out and your dog would go in." > ---Mark Twain > > > On Mon, Jan 15, 2024 at 1:10 PM Glen Jenkins via AMSAT-BB < > amsat-bb(a)amsat.org> wrote: > >> Hello Amsat Members, >> >> I am totally new to Amateur Satellite work. I recently purchased and >> installed AMSAT's SATPC32 and want to use it with my IC-9700. I have a few >> questions and a request. >> >> 1 - On the IC-9700 should the receive (downlink) frequency be displayed >> on the UPPER portion of the screen and thus should the rig transmit on the >> displayed frequency that is on the lower portion of the screen (as I see >> the "TX" symbol there? On my setup, it appears that SATPC32 is setting the >> frequencies backwards. I see the satellite's Downlink frequency on the >> lower half of the screen with a "TX" next to it. So this must be incorrect. >> >> 2 -On the SATPC32 display should the "Downlink"display the receive >> frequency from the satellite and MATCH the frequency on SATPC32 in the >> upper half of the IC-9700 display? On my setup they do not match today, >> sometimes they are up to 2 MHz different. So maybe the communication >> between the program and the rig are not correct. >> >> 3 - I have been able to hear some stations (ex AO-73) yesterday on the 2m >> band.I have tried calling them. I assume that I should be able to call them >> and then simultaneously hear myself,but I NEVER hear myself. So how do I >> sync this up. My assumption is that the other station is listening for me >> on the same frequency so I should hear myself, I understand that the >> satellite repeater is receiving me on 70cm (uplink). Is there some >> procedure to follow in SATPC32 to get synced? >> >> 4 - Lastly, can someone please share with me their settings of the >> IC-9700 to make this all work? >> >> As I am new,I suppose that I'll have a few more questions until I get >> this all functioning correctly. Thanks to anyone and everyone who answer my >> questions above. >> >> 73s >> Glen,WB4KTF, Austin, TX >> EM10 >> >> >> ----------------------------------------------------------- >> >> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available >> to all interested persons worldwide without requiring membership. >> Opinions expressed >> are solely those of the author, and do not reflect the official views of >> AMSAT-NA. >> Acceptable Use and Privacy Policies available at >> https://www.amsat.org/about-amsat/ >> >> View archives of this mailing list at >> https://mailman.amsat.org/hyperkitty/list/[email protected] >> To unsubscribe send an email to amsat-bb-leave(a)amsat.org >> Manage all of your AMSAT-NA mailing list preferences at >> https://mailman.amsat.org >> > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org

1 0

Re: SATPC32 and IC-9700 Questions
by Mark Johns, K0JM 15 Jan '24

15 Jan '24

The instructions you seek are at: http://www.dk1tb.de/IC9700_Setup.pdf There are also several YouTube videos you can search for. People with SAT controllers always think that is the answer to every SatPC32 question. But one has nothing to do with the other. -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain On Mon, Jan 15, 2024 at 1:10 PM Glen Jenkins via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > Hello Amsat Members, > > I am totally new to Amateur Satellite work. I recently purchased and > installed AMSAT's SATPC32 and want to use it with my IC-9700. I have a few > questions and a request. > > 1 - On the IC-9700 should the receive (downlink) frequency be displayed on > the UPPER portion of the screen and thus should the rig transmit on the > displayed frequency that is on the lower portion of the screen (as I see > the "TX" symbol there? On my setup, it appears that SATPC32 is setting the > frequencies backwards. I see the satellite's Downlink frequency on the > lower half of the screen with a "TX" next to it. So this must be incorrect. > > 2 -On the SATPC32 display should the "Downlink"display the receive > frequency from the satellite and MATCH the frequency on SATPC32 in the > upper half of the IC-9700 display? On my setup they do not match today, > sometimes they are up to 2 MHz different. So maybe the communication > between the program and the rig are not correct. > > 3 - I have been able to hear some stations (ex AO-73) yesterday on the 2m > band.I have tried calling them. I assume that I should be able to call them > and then simultaneously hear myself,but I NEVER hear myself. So how do I > sync this up. My assumption is that the other station is listening for me > on the same frequency so I should hear myself, I understand that the > satellite repeater is receiving me on 70cm (uplink). Is there some > procedure to follow in SATPC32 to get synced? > > 4 - Lastly, can someone please share with me their settings of the IC-9700 > to make this all work? > > As I am new,I suppose that I'll have a few more questions until I get this > all functioning correctly. Thanks to anyone and everyone who answer my > questions above. > > 73s > Glen,WB4KTF, Austin, TX > EM10 > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org >

1 0