- AMSAT-BB - mailman.amsat.org

Re: Yaesu G-5500 issue
by mikflathead＠aol.com 22 Jun '24

22 Jun '24

I have not had an issue with mine but I would check to see if you have voltage going to the feedback potentiometers first. That supply would have both az and el in common. Mike On Saturday, June 22, 2024 at 08:36:38 AM EDT, jeff griffin via AMSAT-BB <amsat-bb(a)amsat.org> wrote: After Sitting for 6 months my rotor is acting up. It was working 100 % When I left for the winter. Big issue is it isn't displaying any AZ EL data on the display, and appears to be sending bad data the the LVBTracker. The rotor operates manually but there is no AZ EL data displayed. When I try to track a sat with SatPC32 it seems that that the 5500 is also sending bad data to the LVBTracker as the antenna EL runs away , and the AZ data is also way off. So my question is did anyone also have this issue? I'm thinking it's in the control box as bot AZ and EL are affected. As I can't see the antenna from my operating position I'm off the sats until I can fix this. Any help would be greatly appreciated. 73 Jeff kb2m ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

1 0

Re: Yaesu G-5500 issue
by Bill Booth 22 Jun '24

22 Jun '24

On 22/06/2024 8:36 a.m., jeff griffin via AMSAT-BB wrote: > the 5500 is also sending bad data to the LVBTracker Sounds like both pots in the rotor are dirty. You can check this easly as I believe the leads from the pots are seperate from the rotor to the control box so could easly be measured with an ohm meter. Check the schematic and see. -- Bill Booth VE3NXK Sundridge ON, Canada Lat: 45.741365 Long: -79.457429 Grid Square FN05gr Visit my weather WebCam at http://www.almaguin.com/wxcurrent/weather.html Organ and Tissue Donation - The Gift of Life Talk to your family. Your decision can make a difference.

1 0

Yaesu G-5500 issue
by jeff griffin 22 Jun '24

22 Jun '24

After Sitting for 6 months my rotor is acting up. It was working 100 % When I left for the winter. Big issue is it isn't displaying any AZ EL data on the display, and appears to be sending bad data the the LVBTracker. The rotor operates manually but there is no AZ EL data displayed. When I try to track a sat with SatPC32 it seems that that the 5500 is also sending bad data to the LVBTracker as the antenna EL runs away , and the AZ data is also way off. So my question is did anyone also have this issue? I'm thinking it's in the control box as bot AZ and EL are affected. As I can't see the antenna from my operating position I'm off the sats until I can fix this. Any help would be greatly appreciated. 73 Jeff kb2m

1 0

Re: Using N1MM software for FD Sat logging
by Stephan Greene 22 Jun '24

22 Jun '24

N1MM has a general purpose satellite log template, but do not use it for FD! Here's what I do: Create a new log using the ARRL FD template and add the appropriate station and operator data. I run N1MM stand-alone (not connected to the radio or to a club logging network). I assign arbitrary HF - thru microwave "bands" to each satellite I work (AMSAT FD rules treat each satellite as a separate "Band"). E.g., I enter 1800 in the frequency window for AO-7, 3500 for RS-44, etc. At start of a pass, I enter the appropriate band and log QSOs. N1MM takes care of dupe checking etc. After the contest, I export the data and edit in Excel, changing the bands to satellites for the AMSAT FD. For ARRL, I put in the appropriate TX and RX bands and email it to whomever is submitting our club's FD score to ARRL. Since I am not operating on HF, connecting my laptop to a club network will totally mess things up. I am running the club VHF station between satellite passes, so I'm reserving the "50000 kHz band" for the 6M QSOs. I've found that if you connect N1MM to the radio and doppler correction is running, N1MM interprets the frequency changes as a QSY and clears the logging window! And if I entered the correct RX and TX bands (e.g. 144000 or 435000 kHz), N1MM will treat QSOs with the same station on different satellites as dupes. I've noticed it usually takes me a few QSOs to reprogram my brain to send the FD call and exchange instead of the usual home call and grid! 73 & Good Luck this weekend (and stay cool if you are in the extreme heat zone!) Steve KS1G FM18 (FD: K4LRG 2A(?) VA) On Fri, Jun 21, 2024 at 7:43 PM Charlie Sufana via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > Hi all, > > The local club is using the N1MM logging program for FD and I will be > running the sat station this year. The use of N1MM is new for recording > the sat contacts but I am not finding anything specific. So I must be > missing something. Is anyone else using the N1MM program to record your > Sat FD contacts? If so, what have you got set up in N1MM? > > Thanks for the help. > > 73, > Charlie Sufana AJ9N >

2 1

Using N1MM software for FD Sat logging
by aj9n＠aol.com 22 Jun '24

22 Jun '24

Hi all, The local club is using the N1MM logging program for FD and I will be running the sat station this year. The use of N1MM is new for recording the sat contacts but I am not finding anything specific. So I must be missing something. Is anyone else using the N1MM program to record your Sat FD contacts? If so, what have you got set up in N1MM? Thanks for the help. 73,Charlie Sufana AJ9N

1 0

TEVEL-2
by david.greenberg 21 Jun '24

21 Jun '24

Hello All, TEVEL-2 FM transponder has been activated, starting from today 21.06.24 20:19U for 72 hours.73,David 4X1DGנשלח מה-Galaxy שלי

1 0

TEVEL-5
by david.greenberg 21 Jun '24

21 Jun '24

Hello All, TEVEL-5 FM transponder has been activated, starting from today 21.06.24 19:24U for 72 hours.73,David 4X1DGנשלח מה-Galaxy שלי

1 0

Re: Engineering Q&A Social Begins at 19:00 UTC
by Paul Stoetzer 21 Jun '24

21 Jun '24

Jerry will also be streaming at: - Saturday June 22 at 00:01 – 02:00 UTC (Friday evening-night in the Americas) - Saturday June 22 at 19:00 – 21:00 UTC (anybody free that afternoon) - Sunday June 23 at 00:01 – 02:00 UTC (Saturday evening-night in the Americas) On Fri, Jun 21, 2024 at 2:40 PM Paul Stoetzer via AMSAT-BB < amsat-bb(a)amsat.org> wrote: > Good Afternoon, > > AMSAT Vice President - Engineering Jerry Buxton, N0JY, will be conducting > a Q&A Social all about AMSAT Engineering on his Twitch and YouTube channels > at 19:00 UTC today. > > Tune in at: > > https://www.twitch.tv/n0jy > > https://www.youtube.com/n0jy > > 73, > > Paul Stoetzer, N8HM > Executive Vice President > AMSAT > > > > > > ----------------------------------------------------------- > > Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available > to all interested persons worldwide without requiring membership. Opinions > expressed > are solely those of the author, and do not reflect the official views of > AMSAT-NA. > Acceptable Use and Privacy Policies available at > https://www.amsat.org/about-amsat/ > > View archives of this mailing list at > https://mailman.amsat.org/hyperkitty/list/[email protected] > To unsubscribe send an email to amsat-bb-leave(a)amsat.org > Manage all of your AMSAT-NA mailing list preferences at > https://mailman.amsat.org

1 0

Engineering Q&A Social Begins at 19:00 UTC
by Paul Stoetzer 21 Jun '24

21 Jun '24

Good Afternoon, AMSAT Vice President - Engineering Jerry Buxton, N0JY, will be conducting a Q&A Social all about AMSAT Engineering on his Twitch and YouTube channels at 19:00 UTC today. Tune in at: https://www.twitch.tv/n0jy https://www.youtube.com/n0jy 73, Paul Stoetzer, N8HM Executive Vice President AMSAT

1 0

Fwd: [BRMS] Large, Heavy, Weatherproof Outdoor Cabinets
by K4IDC 21 Jun '24

21 Jun '24

I have a few weatherproof outdoor enclosures available. These were used in the electric utility industry to enclose controls for switchgear. All connections go through the bottom panel. Minimum internal dimensions are approximately 17" x 15" x 9", weight is ~50lbs. The cabinets are made of steel with a neoprene gasket & drip lip around the front door; the gasket might need some attention as these cabinets are ~40 years old. The cabinets have a mounting bracket along the rear that extends above and below the back panel. The front door can be pad locked. There is an internal panel that swings out and it can be removed if desired. There is a 120 VAC duplex outlet & a screw terminal strip inside on the raised, drilled and tapped back panel. All the internals are still in the cabinet, new owner can strip out what isn't needed...it'll take an hour or less. These cabinets are great for remotely located antenna connections, antenna match units, switches, power amps, etc. $60 each, 2 available. Photos here: https://photos.app.goo.gl/tfiiuNFP3Ft5LXQV6 Thanks, Robin Midgett K4IDC _._,_._,_

1 0