I'll make an effort to activate W100AW on as many satellite passes as possible until the call sign expires at 0000 UTC on 1/1/2015.
Will start on the AO-73 pass beginning for us at 1447z today.
I'm still somewhat new to the linear birds but I'll do my best. Hope to get you in the log.
Amateur Radio KX9X
It came to me in a dream:
I’d gladly “work the birds,”
If only I were heard!
My beam is pointing high,
Directly at the sky,
But when I key the mic
My neighbor’s wife goes white
And o’er he comes
To use his thumbs
And squeeze my windpipe tight!
Sent from Windows Mail
Hi to all & HNY !!!!
Since a few days now, a cuban station is active on the ISS packet, he is
CM7BLC and he is getting addicted to APRS...
He will try to be on every ISS pass until January 5, he is new to that
He is using AGWPE+UISS and in the rig section a commercial kenwood radio
(TK-760G) with 25W and a 4 element yagui with a manual rotator...
Despite the low power of the ISS packet tx, he has a very good copy of
He can be reached at: cm7blc at frcuba dot co dot cu
I'm coaching him to get into LoTW, so any QSL from a contact will be
confirmed that way in the future when he receive his LoTW credentials...
73 and again happy holidays and HNY!!!
I will be on FO-29 from the EN74/EN75 line (the 45th parallel) near
Gaylord, MI on the 2105Z pass this afternoon.
I'll be on other passes from that line this week as well. Other passes
today will be from EN74.
I also plan to go to EN84/EN85 later this week. Unfortunately, I don't
think I will make it to EN76 or EN86.
Hello John KC0BMF,
In the past I have used long time a tnc2multi packet modem with UISS and AGWE software.
I also have tried AGWE soundcard mode.
But last period I use soundmodem to decode ISS packet.
With soundmodem I decode much more weak packet signals even with a bit noise.
Soundmodem has good software filters.
73s Cor PD0RKC
There was an issue with the IC-7100 and SatPC32.
I contacted the developer. Erich, in March this year.
It was an issue with the routine that checks the RX/TX status, and
Erich sent me an updated version of SatPC32.
I am not sure if the current version has this fix for the 7100.
Erich follows this list, so hopefully he can give you further information.
On Sat, Dec 27, 2014 at 11:33 AM, Richard Lawn <rjlawn(a)gmail.com> wrote:
> just curious if anyone has tried the 7100 on sats and if it's compatible
> with SatPC32.
> Happy Holidays
> Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb